Keep all this great information coming to the KZfaq community Pharraway….it’s very helpful 🤝

Thank you. I didn’t want to spend a bunch of money before I knew how well a filter worked.

You should put the steel camel after all the plumbing so that it lasts even longer! The way you have it set up now, you're cleaning the air before it goes into to the serpentine plunbimg which kind of makes it of little effect I think. You should let the serpentine plumbing do its job first, then into the steel camel, then into the crystal desicants and then out to your line. Just a thought!

Nice set up for air filtration, all part for the perfect paint finish, thanks for sharing God bless 👍🏻

Thank you for the information. Nice setup 👍

Great video. I have the same compressor, but I definitely need to work on my water set-up.

Great information farraway thank you appreciate you

Steelcamel is down the street from me. Going to pickup a filter in an hour. Thanks for the information ☺️. You are The Man.

Nice set-up

Thank you, great information.

Nice system thank you for sharing 👏👍😎

Great info thanks

Great vid once again, I learn a lot. Never fear, your footage is always very appreciated ! I would be interested to see your air extraction as well at some stage - just because I think your shop is a great one, and one that the "everyman" could aspire to

Thank you brother for sharing this information. I just ordered my first air compressor and HTP filtration system for my dyi 1965 C10 swb restoration project. I would not have attempted this project without your guidance. God bless you for your help!

Thanks for the info, last time I saw your compressor could have sworn it was husky, that kobalt has bigger motor! That filter sounds great though.

Take the beads out and put them in a pot and place on the stove on medium heat, stir them every 10 min until they turn blue again - I do this and reuse the same beads

The water coming out of the pipe network has disrupted the equipment, so what is the solution?

Nice setup I made one similar but it’s in a Mobil quiet box. With temperature controlled puller pusher fan and I have pre tank cooler lines. From the compressor heads before the tank. Then I have after tank coolers on the outside I’ll have to post a video.

Nice video and good infor I've been having issues with my setup however I have a question how much pressure do you have going out the tank into the regulator to the camel filter thank you

Have you looked into the desiccant beads that you can bake and reuse?

Very interested it getting this to put right at the compressor and other filters further away how can you tell when those filters needed to be changed

Where and what brand regulator is that before the Steelcamel? And what do you usually have it set to? Thanks!

What size is that pex pipe? Thanks love the tips and channel

God bless you too, my brother. I do not have an active ion exchange system, such as 5 stg final dryer. I do have a 60gal 2 stg compressor similar to your own. I heard you say that the steel camel could be enough to get good, dry cda. Should I go with a larger camel or do you think this model is good enough. I only hobby paint for myself only and almost never for friends or for extra income. And I would put a tee to a separate regulator for other compressed air work. Thanks!

Do you have a regulator at the line you use for your spray gun? I regulate my air pressure at 120 on the compressor and 90 for the hose connections. I have a motorguard paper filter at spray gun mine. Dessicants break down and create problems. For the money spent I would recommend a refrigerated dryer and you don't have to replace dessicants? Ever have fisheyes that won't come out with the little white spot? Broke down dessicants. Move your camel filter 25-30 feet away and use the motorguard 75 feet away with 4 loops w drain at bottom and you'll save a lot of money. You have a nice setup but spent a lot of money you didn't need to and hobbyists have a hard time justifying that

are you using the rapidair maxline 3/4 fitting as well or did you go with a different brand of elbow and T connectors?

What pressure do you have the compressor set too

👍👍👍

A lot of people make the mistake of mounting the water separator/dryer bead combo to close the the compressor. You have it right. There needs to be a good length of piping or they wont work properly.

How long does that steelcamel thing last?

I seen that in the description the piping is 3/4 is that okay or is it 1/2

Is that pex pipe?

Qué le pasó al Husky

Switch to water based paints and it won’t matter. 😆

Their website is kinda wonky.

Motor 3.7 hp

Way way too complex

i went to the fittings link you posted....Are you using 1/4" connections/couplers.quick connects?