@lanemcook1 Жыл бұрын
Where would we be without KZfaq creators like you that solve every day problems! I was going to buy a barbed one until I saw this. Thanks for the Amazon link, too!
@RickyisHere Жыл бұрын
Thank you! Glad I was able to help
@machobunny1 3 жыл бұрын
That is exactly what I needed and this is the only place I ever learned that such a part existed. GREAT HELP. THANK YOU.
@RickyisHere 3 жыл бұрын
you are welcome Doc 👍🏼
@Eastsidegeorgiaboy 4 жыл бұрын
The first clamp you used is called a worm gear clamp. They also have these clamps that have a sleeve around it so that it doesn't mess up your hoses. There are also T-bolt clamps that you can use. Both couplers are viable long term solutions, with the first type working best with sleeved clamps or T-bolt clamps.
@rickdimsey5459 2 жыл бұрын
Ricky, your video did the trick. Saved me time and money. Thanks!
@joshuahouser7043 4 жыл бұрын
Great video, showed me what I needed to know. Tractor Supply sells them for 5.00 a piece.
@estonbachone 4 жыл бұрын
Hey Ricky that’s awesome! I never knew those existed, it looks like you could make some professional looking custom hoses! Thanks for posting the video, I definitely learned something new today!
@RickyisHere 4 жыл бұрын
You made my day, thank you for your kind comment.
@RickyisHere 4 жыл бұрын
thank you, you guys are awesome 😎
@tom5cox 3 жыл бұрын
so much more professional looking than my many hose-clamp fixes. thanx for the video
@RickyisHere 3 жыл бұрын
Thank you 👍🏼
@stephensmith6457 2 жыл бұрын
Great simple video, great solution for something useful for everyone. Thanks!
@jeffberg2010 2 жыл бұрын
Thanks, great explanation. Perfect fix for my problem.
@MariavSDay 2 жыл бұрын
Great way to teach details!
@RickyisHere 2 жыл бұрын
thank you, I appreciate your comment!
@pululo98 5 жыл бұрын
Thanks for the link Ricky great video.
@bearwoodcarpentry 5 жыл бұрын
Big thumbs up just bought a second hand hose . seller didnt mention leak! This solves it
@RickyisHere 5 жыл бұрын
Thanks for watching and I am glad to help! Let us know how it works for you👍🏼
@Pikertime 3 жыл бұрын
Most importantly, use 500 foot of teflon tape on each fitting.
@jcflores1179 2 жыл бұрын
I was about to say! Ha ha ha ha yeah 3 yards of Teflon!
@Jaxattaxs7 Жыл бұрын
Can you use gas line yellow Teflon or white which is better?
@Withmansour Жыл бұрын
great products
@mobilehomelife4028 5 жыл бұрын
Just ordered them on your link, and thanks for providing the link, video also very, very helpful.
@RickyisHere 5 жыл бұрын
Cool, thank you for watching and posting your comment!!! 😎
@mobilehomelife4028 5 жыл бұрын
@@RickyisHere For a couple days I need to use the old connection piece with the ribs, but when those threaded fittings come in, cannot wait to put them on.
@pastuh 2 жыл бұрын
I stuck with problem.. Got pressure pot with AIR-MIC20M 1/4" coupler, but my air hose have german profile 3/8" coupling (maybe EC20H) And air leak is insane.. I don't know what to do.. How I should fix issue.. Buy new hose from America and pray it fits with compressor coupler.. Somehow install American coupler in to compressor.. Get new air regulator and pray it fits pressure pot.. Or maybe try your method.., but question if I can use any coupler at 03:00
@daves3843 4 жыл бұрын
A good instructional video. I didn't occur to me tha the internal thread was left handed. Thanks
@governmentcheese2257 5 жыл бұрын
Thanks man, i didnt even know these existed .
@RickyisHere 5 жыл бұрын
thank you for watching the video 👍🏼
@mikelavoie8327 Жыл бұрын
Thanks for the video sir!
@marke.anderson1072 5 жыл бұрын
Thanks. I have a very similar setup, and the end of the hose on my reel became cracked and failed. Now I think I can just cut off a foot or two of the end, put on a new fitting, and be good to go again.
@RickyisHere 5 жыл бұрын
Cool, let us know when you do it and what you think about it !
@robertcalaway4970 11 ай бұрын
I use pex crimp rings instead of a hose clamp It works great
@robswrenches9501 7 жыл бұрын
Nice video Ricky. That was a good find on the reusable hose repair fitting. Maybe you can go edit in the link to where you found yours, or pin it to the top. Great content so far, keep up the good work!
@RickyisHere 7 жыл бұрын
Thank you +Rob's Wrenches, I didnt post the link on the video because people could say that I am advertising the item when its not the case. Here it is: Dixon BN32RU62 Brass Reusable Fitting, Adapter, 1/4" NPTF Male x 3/8" Hose ID, 5/8" Hose OD www.amazon.com/dp/B00835MUO8/ref=cm_sw_r_cp_api_QAdRzbQA57QPE This is the one I purchased but there are many other brands and retailers. Thank you for watching!
@robswrenches9501 7 жыл бұрын
Thanks Ricky, I think that anyone who would believe that would be misguided. We are all here to share and collect information that saves us time and money, etc. Thank you for the info.
@keithgunn-glanville7829 3 жыл бұрын
“It’s a long process and you will probably burn some calories”😂 that’s awesome bro.
@RickyisHere 3 жыл бұрын
Thank you Keith
@VCGConstruction 6 жыл бұрын
Good video brother!!!
@RickyisHere 6 жыл бұрын
+VCG Construction Thank you for watching the video and taking the time to post a comment. Welcome to the channel.
@VCGConstruction 6 жыл бұрын
No problem and thank you!!!
@TwoCatsUp Жыл бұрын
My only concern is that the fitting that goes over the hose would leak some. Does it? And could a person use teflon tape around the hose end to help prevent it?
@lpandy21 3 жыл бұрын
Compadre! Thank you.
@belowfray5251 Жыл бұрын
Regardless how big or small, worm gear clamps should not have hose protruding in the clamp. The barbs are to hold it on. The clamp is just a bit of pressure on barbs
@marcoborrillo8097 4 жыл бұрын
Thank you great idea!
@toddyohand1540 6 жыл бұрын
FYI -You are using way to much teflon tape it should be the 2 x 2 rule; leave the first two threads bare and 1 1/2 to 2 wraps in the direction you are tighting the fitting. The teflon is designed as a lubrcant not a sealant..
@RickyisHere 6 жыл бұрын
Thanks for the input, I always eyeball it but I wasn’t aware of the 2 X 2 rule. You learn something every day. So far no problems to report on the hose. Thanks once again for posting your comment 👍🏼
@radarecho57 4 жыл бұрын
I am using less Teflon tape lately and usually use blue Loctite instead. It's easier and looks better. Quite often 1/4 inch NPT air fittings will seal without anything at all. On the other hand, I have had poorly machined NPT fittings that would only seal with a ridiculous amount of Teflon tape.
@user-od2bp9lo6p 6 ай бұрын
Where can I get a hose socket like this?
@316automotive9 5 жыл бұрын
Good vid. I did just as you showed when I blew a compressor hose. Maury, 316 Automotive
@Valentin-kz3he 9 ай бұрын
Its look perfect for me
@RoloisRight 6 жыл бұрын
Those reuseable fittings look like a great thing to have in the field or in a shop, but might be a little pricey for home use. Check if your local auto parts store carries air hose ferrules and if they do the crimping. The ferrules are about a dollar and they'll usually crimp it on for you for free if you buy the ferrule. You can use the original barb that came on the hose so it'll only cost you a buck and a trip to the store.
@RickyisHere 6 жыл бұрын
Thanks for the comment, I prefer to pay a little extra for the peace of mind (better be safe than sorry) but everybody is on a budget. Thanks for watching! I will post a follow up video about the compressor so stick around. Thanks for the subscription!
@RoloisRight 6 жыл бұрын
Costs aside, hose barb ends with a properly crimped ferrule are safer and more secure. They're an industry standard in liquid, gas, and hydraulic applications and they can handle high pressures. It's the reason hoses come from the factory that way (again, regardless of cost). Those reusable fittings explicitly state "Recommended for low pressure air hose applications", which is absolutely fine for emergency field or personal/home use (up to 250 psi), but you're not paying extra for anything more than convenience. You're welcome. At first I wasn't sure if it was a spam channel copying other people's content because of your older videos, but now that I know it's real, I'll keep an eye out for the compressor vid.
@RickyisHere 6 жыл бұрын
My first videos were point and shoot videos that were not really intended for YT but I posted them to learn the process.
@Fredengle 8 ай бұрын
Hi Rolois I found this video because I was trying to get some idea how to repair a bike pump hose my thoughts are why not see if I can take standard air hose repair methods and apply to a bike pump hose I guess theoertically it should work ?
@lawofficesofjhamiltonmcmen5254 2 жыл бұрын
I have a problem. I bought an air compressor on ebay. There is a broken-off connector inside the coupler on the compressor. When I try to remove the bad connector to install another one, the coupler won't screw off with even a long-handled wrench. How to get the coupler off without ruining the pipe to the compressor?
@Damon94Z28 4 жыл бұрын
I ordered this kit on Amazon and installed the first coupler. As I was screwing in the 2nd coupler, the outer part of the hose separated from the inner hose and it was like a clean cut at the bottom of the first coupler. What now? My hose it probably around 15 years old and seems a little brittle. Maybe I just need to replace my entire hose reel?
@RickyisHere 4 жыл бұрын
yep
@walterbrunswick 3 жыл бұрын
after reading some of this, I'm not going to waste my time with these DIY hackjob solutions I got an estimate for a spring hand lever crimper about CDN$1100 plus about CDN$300 for every die set...... but it's something I will be using, as I have a lot of hoses to fix/repair $2000 buy once cry once
@ruatarengsicolneyrengsi8924 Жыл бұрын
Technically, what is the name of the pipe connector you used here? Will be much obliged for the information as I badly need the thing.
@RickyisHere Жыл бұрын
Not sure whats the exact term, I wish I would have an answer
@paulmanhart4481 2 жыл бұрын
Hi. Thanks for the video. But I couldn’t catch the name of the fitting you used. Can you spell it out for me? I’m hard of hearing. Thanks Paul
@Fredengle 8 ай бұрын
I am horrifically poor I dont have cash for fancy replacements should I In theory be able to use the standard air hose valve barb and clamp on a bike pump hose ?
@RickyisHere 8 ай бұрын
Get a better job or a second one 🤷🏻♂️😆
@Scarm1974 3 жыл бұрын
Less Teflon the better. 2 rotations is the recommendation more than that the female threads tear the Teflon.
@RickyisHere 3 жыл бұрын
good to know !💪🏼
@ravebrave8866 2 жыл бұрын
well done chimpala... (Y)
@johnjohnoj6408 2 жыл бұрын
Can you buy at harbor freight
@brettvukovich6220 3 жыл бұрын
It worked for the most part, but now there's a very small leak coming from between my gun and the adapter. What would you recommend to seal that small gap?
@Valentin-kz3he 9 ай бұрын
Ycan put some sealer ur glue in...😊
@derick3482 3 жыл бұрын
can you do this on 1/2" ID air hose too ? ? outside diameter about 7/8"
@RickyisHere 3 жыл бұрын
not sure
@Allbbrz 6 жыл бұрын
Great - that's exactly what I was looking for !!! Do they come in 1/4 too ? I'll check. Thanks for the video !
@RickyisHere 6 жыл бұрын
thanks for watching!
@deborahabercrombie9461 2 жыл бұрын
that fitting cost as much as a new hose
@CoyoteCarChannel 4 жыл бұрын
You put the Teflon on the wrong direction.
@RickyisHere 4 жыл бұрын
Correct
@88mmFlaK 4 жыл бұрын
No, he put it on in the correct direction. Just way too much of it.
@CoyoteCarChannel 4 жыл бұрын
88mmFlaK no he definitely wrapped it the wrong direction.
@88mmFlaK 4 жыл бұрын
@@CoyoteCarChannel You are talking about 3:00 right? He wrapped in the same direction of tightening the fitting... so it wont unwrap when installing...
@CoyoteCarChannel 4 жыл бұрын
88mmFlaK do a google search
@piyalisarkar2113 Жыл бұрын
Pl, available shop or phone no may Pl, inform
@RickyisHere Жыл бұрын
????
masguapoako
Рет қаралды 15 М.
TCB | Taking Care of Business
Рет қаралды 7 М.