How to Repair a Sewer Pipe Under a Concrete Slab

How to Repair a Sewer Pipe Under a Concrete Slab | This Old House

Рет қаралды 1,740,561

Күн бұрын

This Old House plumbing and heating expert Richard Trethewey shows how to rescue a buried, root-clogged pipe, without digging up the whole site.
SUBSCRIBE to This Old House: bit.ly/Subscrib...
About This Old House TV:
This Old House is the No. 1 multimedia home enthusiast brand, offering trusted information and expert advice through award-winning television, a highly regarded magazine, and an information-driven website. This Old House and Ask This Old House are produced by This Old House Ventures, LLC and are presented on PBS by WETA Washington, DC.
Follow This Old House and Ask This Old House:
Facebook: bit.ly/ThisOldH...
Twitter: bit.ly/ThisOldH...
bit.ly/AskTOHTw...
Pinterest: bit.ly/ThisOldH...
Instagram: bit.ly/ThisOldH...
bit.ly/AskTOHIG
Tumblr: bit.ly/ThisOldH...
For more on This Old House and Ask This Old House, visit us at: bit.ly/ThisOldH...
How to Repair a Sewer Pipe Under a Concrete Slab | This Old House
/ thisoldhouse

Пікірлер: 1 000

@SerielThriller 3 жыл бұрын

Plumber: "It's got a high quality video camera". Camera: "144p".

@LazyPlumber89 3 жыл бұрын

It's not bad for something that goes in a sewar line

@kyk2655 3 жыл бұрын

it was 2014 ughhhh

@alonzomartii 3 жыл бұрын

No one really wants to see your shiet in ultraHD, it is enough with the smell

@pookietookie401 3 жыл бұрын

Mine records in about 480p but if this was 2014 I guess I can let it slide

@nietolkj 2 жыл бұрын

How much does something like that cost

@royblomquist2622 3 жыл бұрын

I called five or six different plumbers to come out and look at my drain lines. They wanted over $400 just to put the camera down the drain and they wanted $115 an hour for two guys, that's $230 an hour and I asked them about how much it would cost to to fix it they said about three to five grand. Guesstimating it could be more. I said to hell with that and I fixed it myself. I found out where the lines came out from underneath of the house. Got out of shovel and dug it all up. All the cast iron was completely disintegrating. I got my recipitating saw and cut it all out. And replaced it all with PVC. My wife and I did this in two days. It took the longest to dig it up with a shovel. The actual repair took about four hours. Cost of materials less than $200.

@soyeljefe8502 3 жыл бұрын

I think they would agree that the preferred method is to just remove the old pipe with new pipe. But in some cases you can’t access the drain lines. I have a few that would be completely inaccesible.

@kevinvinson407 3 жыл бұрын

would you mind to list your materials?

@royblomquist2622 3 жыл бұрын

@@kevinvinson407 two pieces of 10 ft PVC drain line. Two cleanouts, 2 fernco fittings 4 hose clamp fittings for the ferncos. 2 caps for the clean outs saws all blades PVC cleaner and glue. 1 90 degree Male adapter. 2 housings to cover the clean out . We did this in November of 2020. So it would probably be more expensive now.

@Muko992 3 жыл бұрын

U don't have a basement

@pvern78 3 жыл бұрын

Agreed, it's always cheaper to do it yourself. It's funny when customers call and say it's a "simple job" or "I could do it myself, but..." and want a cheaper price. Props to you for actually doing it.

@michaelcastillo3231 4 жыл бұрын

I hope the person who invented this is sipping margaritas in Bora Bora. I tip my hat to you.

@Supremebeinglivingmybestlife 3 жыл бұрын

Yessss i felt like i wished i invented that especially since i have had that issue before very nice

@conqueringlion420 2 жыл бұрын

Problem is you dont wear a hat or own any. Well have to contact this plumber for a solution to this as well

@costeno6420 2 жыл бұрын

With two or three gorgeous girls by his side

@Pw6872 2 жыл бұрын

I couldn't agree more!

@dberry99 3 жыл бұрын

That is the coolest plumbing invention I've seen in 20 years. Brilliant!

@jonvata1790 2 жыл бұрын

That has been invented in England a long time ago not on the 20th century lol it just arrived in the usa in the 20th century lmaoo

@joshbell958 2 жыл бұрын

@@jonvata1790 this guy doesn't have a patent on this kind of stuff does he? Like..other people can do this method and kind of stuff for pipes?

@jonvata1790 2 жыл бұрын

@@joshbell958 anyone can do it

@allentoyokawa9068 2 жыл бұрын

Invented in the USA

@allentoyokawa9068 2 жыл бұрын

@@jonvata1790 WRONG

@comancheclub3449 5 жыл бұрын

Nobody gonna mention the traffic cone funnel at 2:30? 🤣

@DatHughJass 5 жыл бұрын

Sometimes improvising does better job than the actual tool. Sounds weird till you have tried it.

@steveoo410 5 жыл бұрын

I can't believe not single person besides you has commented on it. The traffice cone funnel is quite hilarious though.

@MrBeast9000 5 жыл бұрын

Well thats typical roto rooter tools, probably has a 60% markup to use it too. LOL

@oldtwinsna8347 5 жыл бұрын

Was it taken off the street from a construction zone?

@dmo848 4 жыл бұрын

@@MrBeast9000 oh that's funny

@jascam1 3 жыл бұрын

OMG, no wonder modern plumbers charge so much, this is like a surgeon implanting a stent into an artery. The wonders of technology. Another great video from this old house.

@joeelsaesser1659 Жыл бұрын

And it costs between 60 and 80 thousand dollars

@rhrh5145 Жыл бұрын

60 to 80 k to do this repair?

@joeelsaesser1659 Жыл бұрын

No...the cost of the machine.

@nexusone5584 6 ай бұрын

@joeelsaesser1659 it's a gun, roller and a shop made air manifold. It's like 10k worth of equipment. You're paying for the skill of the operator, the rest is overhead and inflated prices.

@Rick-the-Swift 3 ай бұрын

Keep in mind you are making your sewer line's inner diameter about a half inch to 3/4 inches less than the old one, which may have already been undersized. On top of that, if the old lines had any sags, those will now be exaggerated by the newer smaller pipe. Bottom line, I would be very weary of allowing this expensive method, probably only as a last result. 3 inch pipe is questionable. Going down to 2.5 inches or less seems like border line insanity.

@mt.sylvania9218 2 жыл бұрын

I had two jobs done similar to this using the Perma-Liner inverted sock similar to this. The end result was a 1/4” thick wall PVC-like pipe inside of the existing pipe. The liner pipe penetrates the pores in the existing concrete pipe so it is firmly embedded. The pipe is smaller diameter by 1/2” inside but is much more slippery. Our present house had roots jamming the sewer right next to our house from trees and unfortunately right under our hot tub slab. The sewer cleanout is between the hot tub and the house and the sewer is 3’ deep and 80’ long, going under trees and bushes. The other job was 35’ long, 8’ deep and went diagonally under a 10’ wide concrete driveway. Roots from trees were in the sewer. A small backhoe dug the single 8’ deep access point. In both cases they only needed a single access point and both jobs were completed in 2009. The expected life is at least 50 years.

@ChavezDIY Жыл бұрын

How much did it cost you? My dad's house needs a job like this.

@kevinpichard8336 7 ай бұрын

This works fine as long as the existing pipeline (to be lined with this perma-liner type sock) is one continuous pipe with no 'feeder' pipes leading into it (i.e. the input from bathroom sink drains, kitchen sink drains, shower/tub drains, washer drain, etc. Those 'feeders' will be blocked by this insert. As long as the concrete slab is a porch or similar 'slab', then fine, but if the slab is the foundation of your home, the method reflected in this video will NOT work; it will block all the drain 'feeders' leading into the main pipe.

@Rick-the-Swift 3 ай бұрын

Did you forget to take into consideration that once turds and organisms start using the new pipe, it's slipperiness will fade rather quickly- especially once you've snaked it with an auger. Those things basically act like sandpaper, ensuring the inner pipe remains rough for the rest of it's service life. Just curious if you've had any issues with big dumps or large wads of toilet paper etc. clogging the new line? Thanks in advance

@nexusone5584 Ай бұрын

@@Rick-the-Swift running blades through these liners doesn't damage them in the least.

@Rick-the-Swift Ай бұрын

@@nexusone5584 Damage is in the eye of the beholder. I don't think little scratches on the inside of the pipe is considerable damage, but many augers will have little serrated teeth for chopping roots, and being that metal is harder than epoxy, those augers will scratch rings around the inside of the pipe. Sure they'll still function, but my only point was they will quickly lose their slickness the OP saw as being an advantage, just as pvc pipes become quite grimy on the inside, even without being scratched up by an auger. Also, just pointing out what the OP said about the walls of his new liner being 1/4 inch thick- this means the inner diameter of the pipe is actually reduced by 1/2 inch, not 1/4 inch as you suggested in the other thread.

@randyd3649 4 жыл бұрын

“It’s hard and it’s ready to go.” That’s what she said!

@MrSleepProductionsInc 4 жыл бұрын

Figured that would be more likely something He said. 🤷🏽‍♂️

@jammedyouup-8619 3 жыл бұрын

That's exactly what she said!!!

@eyehear10 3 жыл бұрын

Hahahahaha oh man this is so good!

@genie6567 2 жыл бұрын

Im still LOL 😆

@KeithsTVHD1 2 жыл бұрын

lmfao!

@drewcarpenter3053 3 жыл бұрын

Very thorough explanation of how pipe lining works.

@DTSupstateNY 2 жыл бұрын

I highly recommend Pipe Patch for small sections of pipe that need to be repaired, much easier process. Also for anyone considering this.. this is actually more expensive then jack hammering up the floor and replacing the pipe

@dirtymikeandtheboyz2570 2 жыл бұрын

No it's not

@DTSupstateNY 2 жыл бұрын

@@dirtymikeandtheboyz2570 Where I live it is …

@rodm5830 6 жыл бұрын

Trenchless pipe lining: relining your damaged lateral or sewer pipe will typically cost $80-250 per foot, with an average of around $160 per foot. For standard sewer lines, repair costs can vary between $4,000 and $20,000, depending on circumstance.

@whosmansisthis1894 2 жыл бұрын

The inventor of this! Has saved so many people thousands!! 👍🏽

@CSJiGSaW08 Жыл бұрын

the inventor of this is lined with insurance money so they win lawsuits with trench-less repair quotes. sad thing is, it does not work with certain cast iron issues LOL

@Rick-the-Swift 3 ай бұрын

No matter what the situation is, you are down stepping the inner diameter of your sewer line by at least 1/2 inch, and any sags or kinks in the old line will now be exaggerated by the new smaller sock liner. Plus this is not an inexpensive fix by any means. I smell a lot of law suits against these companies in the future, no pun intended.

@nexusone5584 Ай бұрын

@Rick-the-Swift it's roughly 1/4 inch, not half.

@Rick-the-Swift Ай бұрын

@@nexusone5584 I believe I saw several points of reference stating that these epoxy socks have approximately 1/4 inch wall thickness. If that's the case and the thickness is 1/4 all the way around, then the inner diameter is reduced by 1/2 inch. Are you under the impression that the wall thickness of the liner is only 1/8 of an inch? If so, could you provide a reference point? Thanks

@nexusone5584 Ай бұрын

@Rick-the-Swift @Rick-the-Swift Again, the i.d. change is in terms of over all. Adding .25 on all sides. It's not the same as if all sides were increased by .5, there is a difference. An over all increase of .5 is unnoticeable in terms of function. This being said, yes, there are different lining materials that are different wall thickness; Wovo for example is a much less dense fabric weave and is therefore flattened further by the calibration tube. These thicknesses can also vary depending on what pressure these systems are blown in at. Creases on 90's and 45's are also negligible when the liner is installed properly.

@zoyaawolowo3111 6 жыл бұрын

Technology is wonderful, especially when it saves time, money and stress. The sewer pipe liner and bladder to expand the liner to conform to the old CPVC sewer line is an ingenious design. The only thing that would worry me a bit is the epoxy curing time running out before being able to fill the bladder with water through the manifold system. Great video as usual from This Old House. Thanks you guys and thanks Rich :-)

@nexusone5584 6 жыл бұрын

Zoya Awolowo you can modify the mixture to cook off faster or slower to adjust for ambient tempature. However you'd better hope you have a well seasoned technician installing yours because If it collapses under your home....your in for a nightmare. Lived that life

@michaelpalacio103 2 жыл бұрын

@@nexusone5584 What happened? Were they insured and payed for their mistakes?

@nexusone5584 2 жыл бұрын

@@michaelpalacio103 it used to be that you had to either dig it up, or use blades on a Sr. Cable or a warthog nozzle on a jetter and beat on the closed end until it opens. If the entire line collapses then the installing company eats the cost to dig, repair and backfill. There is now a robot that can be remotely sent down line with a 360 degree cutting apparatus... the machine is over 100k.

@la-ia1404 2 жыл бұрын

Who said it was saving money?

@zoyaawolowo3111 Жыл бұрын

@@la-ia1404 I did. 🙂

@JohnAK72 6 жыл бұрын

sewer pipe angioplasty??

@refusoagaino6824 5 жыл бұрын

Upper endoscopy. I saw the trailer. As a contractor I stopped laughing a long time ago. People spend more on wall paper than they do on radon mitigation, or serious maintenance. Who said, "Make sure you have a good-looking corpse"? Half the houses in southern California are 40 to 50 years old. If you wanted an efficient vehicle from a car that was that old, would you start with a '74 Eldorado? Actually, I remember just after the first oil crisis (1971) when GM put "selective firing" systems (didn't have software) into their front-drive, V8's like the Olds Toronado, and the "Eldo". A friend put a snow plow on one. You could pick them out easily, they were the vehicles abandoned at traffic lights, stalled from too rich carburetion, from idling on four cylinders.

@prenticevaughn1996 3 жыл бұрын

Thanks for sharing video Things like this that keeps civilization going for a better quality of life.

@mattypants 19 күн бұрын

They are in the process now of doing this in our entire city. My street is scheduled for Monday coming up and I live on the corner. I'm off work and hoping I'll be able to watch some!

@jimmuleta2985 2 жыл бұрын

Great video . My question is what do you do if there are t junctions running off the straight section?

@roseymalino9855 2 жыл бұрын

Is there a clean-out at the junction?

@breebw 2 жыл бұрын

@@roseymalino9855 No.

@Nightl3lade 2 жыл бұрын

thats probably an instance where you would definately need to do some digging

@cometcal2 2 жыл бұрын

There's a method where measurements are made where the junctions are located and holes are cut inside the liner at the junctions. Bigger companies usually spend the money for the equipment to do it this way.

@samuelsandoval3886 2 жыл бұрын

Really cool, How much does this procedure cost. I Have a rental house with the root issue and want to know what my best, most affordable option is to fix the clogging and deteriorating sewer line.

@megahuzt 5 жыл бұрын

My house's sewer line has some roots but still pretty decent so instead of spending thousand of dollars to repair/replace it, I use ROEBIC foaming root killers and ZEP Root killer to flushed down to the pipe once a year and this is the 2nd year we are free of clogs since.

@leosrule5691 5 жыл бұрын

@ThisOldHouse; I truly wish that when you made these videos that you also gave approximate costs. That way, a homeowner could know what to expect and not be swindled.

@MegaGsizzle 5 жыл бұрын

Usually they show the best way but also more than likely the most expensive way

@djaqt2 5 жыл бұрын

My sewer line is backed up and my trap is under concrete in my basement . Roto rooter gave me a quote of $1200 to drill through the concrete and snake the trap.

@carlo7519 5 жыл бұрын

@diver dave I do you one better! Give me half of that and I help you with a plastic teaspoon. 😅

@crunch9876 5 жыл бұрын

Don Guille this is not the best way. It’s the worse way

@mrbadhabit73 5 жыл бұрын

I would have hydro jetted that line the blasted it with foaming root killer.

@diahan9896 4 жыл бұрын

I have a lot of questions from this method. 1. How thick is that new line of pipe? Wont it bother the flow? 2. How did they connect it to the old line? 3. Will the roots wont bother that type of material? Please bear with me. I just want to learn this type of method.

@carlostinocogarcia36 3 жыл бұрын

IS VERY EASY MY FRIEND THE CONECT TO DRAIN AGAIN BUT THE GUYS CHARGE ALOT MONEY FOR LINING

@HarryGoulding 2 жыл бұрын

1. 4" 2. it does not bother the flow at all 3. It expands and creates a "new" pipe within the old one 4. They have no chance against that epoxy once it hardens

@nexusone5584 2 жыл бұрын

1:The new line is 1/4" not 4". Flow will generally increase, the inside of the new line has a slick finish. 2: The new line is still housed withing the existing line, so you simply cut the now fused pipe flush and connect with the appropriate coupling. 3: There are no seams in the newly lined section of pipe therefore, those areas are virtually impervious to root intrusion.

@orlandoalberty7783 8 жыл бұрын

A cured-in-place pipe (CIPP) is one of several trenchless rehabilitation methods used to repair existing pipelines. CIPP is a jointless, seamless, pipe-within-a-pipe with the capability to rehabilitate pipes ranging in diameter from 0.1-2.8 meter (4"-110"). As one of the most widely used rehabilitation methods CIPP has application in water, sewer, gas, and chemical pipelines. Typically a plumber will charge $25,000 too big of a 3 bedroom 2 bathroom house and replace the pipes that includes the concrete replacement, but it does not include the floor covering replacement such as tile, marble or carpet . If the pipe lining company has to travel far to do a small dollar job, they will have minimum mobilization costs, typically $3000-$5000. This would be the smallest size job they would do for a certain travel distance.

@trevorbelmont6905 6 жыл бұрын

Orlando Alberty thats true we do charge around that amount

@bobbywilliams2471 6 жыл бұрын

(1) will it fail after the pipe it is installed in fails due to age? (2) how easy is it to repair if it fails after the pipe it is installed in fails? (3) what is the cost of the repair if it fails? (4) is it a good solution to use in neighborhoods that still have terracota pipes going from the house to the sewer?

@vGIVIRIVI 2 жыл бұрын

thank you from five years in the future. i assumed but i wasnt sure how big the diameter this would work at

@RavinderKumar-bo2st 3 жыл бұрын

I'm a plumber but never really saw that kind of video. First of my life

@paulperez9571 2 жыл бұрын

RIP Chuck Berry, Thank you everything you’ve done for me and being a great boss.

@nexusone5584 Ай бұрын

@paulperez9571 was saddened to hear of Chucks passing too, spent a good amount of time around him and Debby as a child. Good people. How have you been man?

@RicardoJunqueira 10 жыл бұрын

Amazingly smart technology! Thanks for sharing!

@septictankpumpinggreasetra6403 5 жыл бұрын

The boys from This Old House are at it again this time with sewer pipe issues from tree roots encroaching on the old clay sewer pipe. The liner is the way to go with trenchless sewer line repair.

@MrThisIsMeToo 4 жыл бұрын

Are you one of those weird fan boys or something?

@pvern78 3 жыл бұрын

How does this handle branch lines? Most of the replacements/repairs we do have multiple branches connecting to the main line.

@nexusone5584 2 жыл бұрын

All taps have to be cut out either by the rover, or by cable machines with Chuck modified to accept a wholesaw

@tii2015 4 жыл бұрын

Just saw a good question in the comments. What does happen if you have to have the pipe snaked? Is there a special head that has to be used? TII

@nexusone5584 4 жыл бұрын

Nope, common blade work just fine, even hydro jetting.

@81recinos 6 жыл бұрын

I love how the owner grabs the camara with no gloves when that camara has been in a lot of sewer line and just fwi dont call roto rooter they rob you blind

@SLPMEX 5 жыл бұрын

They charge 250 for 3 minutes work,insane

@dmo848 4 жыл бұрын

They charge that cause of 20 years of practice my friend. Is your drain flowing? Lol

@johnsmith-wc8gs 4 жыл бұрын

Mr. Rooter proposed to clear aand repair my drain for 8k. They didn't know I was in the trades so I had some coworkers do it. Even their diagnosis was wrong and I was able to fix it in about 2 hours for 150 bucks. It helps to know people but c'mon! They will rob you blind

@daverhodes382 4 жыл бұрын

@@johnsmith-wc8gs Piffle on stilts.

@fd8133 4 жыл бұрын

I need to get this done for that price

@datdude_jcole9275 2 жыл бұрын

Brilliant! I am curious how the system will hold up against roots in the future & also can the new liner be rootered without being damaged if a clog presents itself later on..?

@nexusone5584 2 жыл бұрын

It holds up very well to roots, since there are no joints or "seams", roots are unable to penetrate. As for crush resistance, the pipe is actually stronger than it was initially because it now has, not only the structural integrity of the original pipe but also the rigidity of the new line. Typically the sidewalls of a 4 inch Liner is somewhere in the 1/4inch realm. The only thing that would be any stronger, would be hdpe. When it comes to maintenance, you can clean them with all forms of drain cleaning machines, free from worry or damage, that being said you should never have a reason to clean a re-lined pipe again, as long as it was installed correctly by a trained/seasoned technician. It is truly a great system however it's application is not the answer for everything.

@datdude_jcole9275 2 жыл бұрын

@@nexusone5584 thank you!

@nexusone5584 2 жыл бұрын

@@datdude_jcole9275 No problem! I have re-lined many pipes during my time with roto-rooter and have had the privilege of working directly with paul (technician in the video) and cannot stress enough how much the experience of the technician installing the line matters. Only certain lines are the right candidate for this system.

@AccordionJoe1 4 жыл бұрын

Never buy a house without a basement and you won't have to worry about ripping up your concrete slab to make a sewer line repair.

@louyht7 4 жыл бұрын

With or without a basement?

@SalvadorSTMZ 3 жыл бұрын

Yeah but then you have to maintain the basement which is way more expensive anyways. Water always gets inside.

@TheLivedeath 3 жыл бұрын

A lot of places don't have basements. California being one.

@workingshlub8861 7 жыл бұрын

we had to to this at my work...75 feet of 4" starting to collapse...it cost 13k.... it would have been a nightmare to do it the other way....these were apartments and they did it in 2 days start to finish.

@kuam1970 4 жыл бұрын

Bro you go home depot get 3 worker's and bum is you finishing all that digging 1k workers, 1 on materials no probllema,finito😄😄😄🙏

@MrBronze71 4 жыл бұрын

@@kuam1970 Dude That's exactly what I was thinking.

@dmo848 4 жыл бұрын

Dude my team would rip the apts up put pipe in ground and cement by the end of day 2, no problem. For around the same. N my team will actually fix the problem.

@zorroonmilkavitch1840 4 жыл бұрын

@@kuam1970 wow what language are you speaking

@justme2 4 жыл бұрын

@@kuam1970 Wow, I didn't know you could do that. Could you explain that a little more? I may go that road. This way (clever as it is) doesn't look like it'll hold up very long. I prefer something more reliable.

@robertoacevedo3805 3 жыл бұрын

What about when you have Y-connections, T’s. Would you just not use it in that case?

@ivanbermudezchavez6186 3 жыл бұрын

Maybe they locate where those Y-connections are and just drill a hole in the condom/sock and seal the edges.

@tailyfale 3 жыл бұрын

@@ivanbermudezchavez6186 yeah, with marsian blasters

@ivanbermudezchavez6186 3 жыл бұрын

@@tailyfale are you angry ?

@Junk65 4 жыл бұрын

My roommate called the Smell Good Plumber while I was out of town working. I flew back to speak to these plumbers, they wanted to dig up my yard to replace pipe $10,000 plus $1200 to drain the Hazardous water from the bath tub. Hahahahaha what criminals!

@hotbam37 4 жыл бұрын

why was it hazardous water? was there drain-o in it?

@carlosdanger1521 3 жыл бұрын

10k might be a little too much but it sounds about right, I’ve been a plumber for 12 years and this method of “replacing pipe” I’ve never seen, it must be because it sucks, and imagine how expansive this is. It’ll probably e cheaper just to brake and replace the whole thing, Now about draining the liquid idk about that, that might be a rip off

@elchapitodeguerrerofans4640 6 ай бұрын

Thousands of dollars worth in high end equipment and using a traffic cone to pour the mix in the machine? It's a sublime experience, something surreal... Like day and night, good and bad, black and white, fire and water, and the list keeps going on and on

@mtadams2009 4 жыл бұрын

Back in the day I had roots in my drain pipes. I rented the tool and removed the roots myself. After that I found a local company to perform the task every two or three years. It was fairly cheap. I never had an issue after that. The first time I did it I removed pretty much a root forest, the pipes were very old. It worked out fine in the end.

@limadu671 3 жыл бұрын

the same here.

@bossudude420 2 жыл бұрын

Eventually you’ll get a misalignment or cracking as the roots tend to grow back more aggressively

@pshawhudson 3 жыл бұрын

Just be aware that the diameter of the pipe is reduced with this method Which can make some pipes more prone to clogging.. Good video. Thx

@nexusone5584 6 ай бұрын

By roughly 1/4".

@bethbyerlein7175 2 жыл бұрын

Does this work for a cast iron pipe inside a house?

@minor25 5 жыл бұрын

nice Job but nothing stopping the roots to continue growing so eventually roots will break that new thin new pipe line again .

@BigJnWorldWide 5 жыл бұрын

I've been told that the roots will stop growing after about 7 years. If they have no food supply, they'll die.

@nexusone5584 6 ай бұрын

Nope

@jerrymenace1687 5 жыл бұрын

We have this system where i use to work, we normally charge clients between $8,000 up to $20,000 depends on length of the pipe and how bad its condition.

@willieg8224 4 жыл бұрын

Jerry Menace what’s the system or machine called

@justayoutuber1906 Жыл бұрын

@@willieg8224 Trenchless relining

@nexusone5584 25 күн бұрын

@willieg8224 this particular one is called maxliner

@alkhan4921 4 жыл бұрын

Simply unique invention!

@sorrow5233 6 жыл бұрын

After watching this video I knew the comments were gonna be gold. lol

@lestagez 2 жыл бұрын

now two questions, does it now make the pipe smaller ? and what happens the next time when a root gets through, do they do the process again and now make the pipe even more constricted or will they have to dig it up and repipe?

@Jimboo0825 10 жыл бұрын

"High quality lense" 😂 LOL it sucks

@DanLoFat 9 жыл бұрын

Jimboo0825 Nooo, some of them are very good.

@RobertLeBlancPhoto 6 жыл бұрын

The lens is high quality. The camera sensor... Not so much. 😉

@851995STARGATE 6 жыл бұрын

This is very old, although it was uploaded in 2014 it's an episode from around 07-08. Therefore the camera sensor was high quality for its time

@AlMai222 5 жыл бұрын

9000$ camera

@dmo848 4 жыл бұрын

It's high quality cause you've never seen the garbage 1s. U can't see anything, mostly blurry picture, but it's cause the tech is old tube style tv with i don't Kno what kind of camera

@chefsteven34 3 жыл бұрын

No more employees asking, “has anyone seen the funnel?”

@antonios4926 4 жыл бұрын

Thanks for the video. Has this process/system have a name?

@ashh3051 3 жыл бұрын

The Ol' Sock Pufferoo

@antonios4926 3 жыл бұрын

@@ashh3051 LOL

@lnajsh 4 жыл бұрын

This is ingenious

@KD-lq1sr 7 жыл бұрын

Just wait until there's a clog in the future and Roto Rooter comes in with a sawtooth blade and sectional machine. Goodbye 1/16" thick sleeve! I have a basement so I'd not hesitate to replace the pipe with new. But I'm also not concerned about that quantity of roots either.

@TNtoolman 10 жыл бұрын

REALLY slick... I'm very impressed...

@DanLoFat 9 жыл бұрын

Porsche924Tim Cities and municipalities across the US are using this system for the largest of pipes too.

@vmao4868 3 жыл бұрын

Is trenchless the only permanent solution other than digging up and installing new piping?

@ray729fl 5 жыл бұрын

What kind of costs for this service?

@jrock247 2 жыл бұрын

If this machine only lines the main, how do the smaller drain lines tie in after this?

@lourak613 3 жыл бұрын

What happens at the end of the replacement pipe? How does it terminate. If it is just cut off, won't things get stuck when they hit the edge of the new pipe?

@LeeKeels 2 жыл бұрын

I would assume you'd terminate where the pipe enlarges, eliminating any chance of causing a hangup.

@nexusone5584 Ай бұрын

Cut off and reamed

@josephnorcalusa1710 6 жыл бұрын

Wow nice video, Thank you for sharing !!!

@BradiKal61 4 жыл бұрын

Ive been snaking my own line for about 5years now. I use a machine called the Electric Eel, which is a motor on small wheels, and you attach 8 foot sections of heavy spring to the front and push them into your clean out and go back and forth where you feel resistance from roots. Roto Rooter costs $300 bucks and renting the Eel is $60 for 4 hours. RotoRooter guy only went to a 3 inch cutter, but i work up to the 6" cutter and really get it cleaned out.

@zorroonmilkavitch1840 4 жыл бұрын

How does a 6-inch gutter fit into a 4-inch line

@philh8023 2 жыл бұрын

Use root treatment every 3 months and you be good.

@maryglasser404 4 жыл бұрын

Cost just under a thousand dollars per foot. The old way came less 300 dollars per foot . Jackhammer and pour new cement. We went #2.

@sirhamalot8651 4 жыл бұрын

This is amazing!

@nuttmasterflex1831 5 жыл бұрын

Dudes face when he grabbed the camera 😂😂😂

@hotbam37 4 жыл бұрын

which dude? i didn't see anything out of the ordinary

@jorgecallico9177 3 жыл бұрын

It certainly seems to be good at saving an existing sidewalk or masonry surface from getting torn out. However, I wonder if it's really any cheaper than a regular dig? My guess is that there are little actual savings to the homeowner. Don't forget! The trenchless ''inflate-a-sewer-line'' can only follow the path of the existing, old sewer main. What happens if, as old pipes will do, the line has developed a severe belly in it? Or it has settled in an unpitched plane? Worse still, what if the old line has settled so much that it is now actually travelling at least slightly uphill? I can't see a remedy for this except for a dig. I suppose that even a poorly pitched liner is somewhat better than the formerly root-infested line. Yet it seems like this new method has some weaknesses.

@BOSS_805 7 ай бұрын

This is a genius method for straight runs of drain pipe what do you do when you have a 90 or a t-fitting along that stretch of pipe?

@JcP3737 5 жыл бұрын

What happens when you have a y or combination fitting?

@julianjaramillo4849 5 жыл бұрын

MrHailCanada they have to cut a hole there

@TopDoggg 5 жыл бұрын

You either gap it or reinstate from the main or lateral connection using a pneumatic tool

@woodeez 5 жыл бұрын

If you watch the original video, afterwards they show how to do that. www.hulu.com/watch/05c8b0e1-d211-4d53-8f84-b84b05f72651

@nexusone5584 4 жыл бұрын

Cutting it out is the only solution.

@smokestrong1000 4 жыл бұрын

yeah never tunnel a slab or you're gonna have some foundation problems in the future. this just seems like a cheap patch though. doesn't it reduce the diameter? I seen trenchless repairs where they take a machine that breaks up the old pipe and pushes in a new line

@howardlovecraft750 4 жыл бұрын

Ingenious setup.

@777-Phil 2 жыл бұрын

That is amazing. God has certainly allowed mankind some excellent inventions and professionals, imho.

@jlister469 5 жыл бұрын

What is the name of this Plumbing Company? Are all Plumbing Companies aware of this technique? Great job.

@crunch9876 5 жыл бұрын

J Lister yes they are all aware of this technique... but it sucks since it’s more expensive than a proper fix

@walterulasinksi7031 4 жыл бұрын

Only one question, how do you drill for the branch line drains to empty into the liner?

@nexusone5584 4 жыл бұрын

There is a specialized robotic cutter system that does the work, about $100k to purchasr. Affectionately referred to as the cookie cutter, works when it works but when it breaks, costs roughly $3k to fix.

@PlumbGod_88 4 жыл бұрын

I’ve worked with chuck for 10 plus years. He’s a great guy

@nexusone5584 4 жыл бұрын

Nice, is paul still with Pro pipe or did he leave?

@paulperez9571 2 жыл бұрын

nexus oneI left PROPIPE 5 years ago

@nexusone5584 6 ай бұрын

@@paulperez9571damn I just saw this! Paul is this legit you?

@nexusone5584 Ай бұрын

@@paulperez9571hope all is well for you bro, been many many years! Hope taco hut is still rocking those bomb fish tacos!

@timothywhieldon1971 7 жыл бұрын

whoever came up with this system is a freaking genius and is going to make his fortune

@Skanzool 7 жыл бұрын

It only seems like it's genius to you because you don't work in the industry but there are better and cheaper methods of pipe rehabilitation than this and they are less risky to the environment, not to mention this method runs you the risk of having the resin not set properly and that is a major problem. Happens often and that's why this method is not used that often.

@beeveebee 4 жыл бұрын

@Skanzool You are completely wrong in your assessment. This is by far the best and most economical way to repair a sewer pipe. In particular sewer mains.

@zorroonmilkavitch1840 4 жыл бұрын

@@Skanzool I'm not so sure that's true

@AxcelGamer97 4 жыл бұрын

@@Skanzool You're wrong lol.

@nexusone5584 2 жыл бұрын

@@Skanzool only if you have a technician who doesn't know what they're doing

@Chuck59ish 10 жыл бұрын

Probably pricey, but better than all that digging, replacing pipe and putting things back to the way they were.

@josephrapoza6453 4 жыл бұрын

How much is the cost per foot, compared to a remove and replace.

@johnsmith-wc8gs 4 жыл бұрын

It will vary but count on it being several thousand dollars for a repair like this. You're looking at roughly 400 per foot depending on conditions. Say you have 20 feet in need of repair that is under a home that is slab on grade spending 8k to line the sewer is still cheaper than removing the floor, jackhammering the concrete, going under walls etc. Plus all the headache.....

@nexusone5584 4 жыл бұрын

It all depends on the company you get the quote from. I can tell you the markup on the material is HORRENDOUS. I remember we paid somewhere around like $20 a foot but sold it for roughly $120 a foot. If you can access the damage and its only a small area, you are better off excavating. Just 2 cents from someone with a lot of experience in it.

@rosethornil 3 жыл бұрын

Thanks for this reply. After watching this, I was thinking, wouldn’t it be easier just to dig up the troublesome spot and do a proper repair?

@waverly9648 4 жыл бұрын

this is the coolest plumbing vid ever

@jerzmade5392 2 жыл бұрын

This is beautiful technology and invention

@joeadd5911 3 жыл бұрын

What is the cost for this procedure on average typically?

@billjohnson7669 2 жыл бұрын

I'm doing 41' from my cleanout to where my neighbor's shared sewer line connects for almost exactly $10K. Twin Cities, MN

@tonyanderson8497 2 жыл бұрын

@@billjohnson7669 dang

@lcaunan 3 жыл бұрын

This is an amazing technology. Plumber: This will last for a long time Toxic Feces: I don't think so.

@nexusone5584 2 жыл бұрын

Has a 30 year guarantee. It's a polymer resin infused sock.

@bassist718 2 жыл бұрын

Had a clay pipe... this method was mentioned to me, I refused it. I had it all pulled out and replaced with PVC. Not that this isn't a good idea because the cost of the replacement was exorbitant, I just feel more comfortable with PVC.

@KCCardCo 9 ай бұрын

You did the right thing because the PVC will last during your lifetime. This idea here is not bad but it's like nickel and diming repairs that get more expensive each time.

@beny8668 4 жыл бұрын

What happens with the drains inside the house ? How would the drains from the toilet and shower pass through to the mainline if this seals the whole pipe with no openings?

@Prima10ne 3 жыл бұрын

If they can do this.. do you not think they can also cut a hole into it at a specific point?

@steakwilliams4448 2 жыл бұрын

@@Prima10ne this really only shows the mainline. How could branch lines be done in such a way? Cut hole in the pipe? Would that not involve cutting concrete or tunneling under the foundation? The whole point of this system is to avoid that

@plumberman5369 7 жыл бұрын

In Texas we simply tunnel underneath the slab never having a break it and replace the pipe that way. Is that a not an option anywheres else

@redranger518 5 жыл бұрын

Many places up north the pipe is too deep to tunnel. With a basement it can be up to 10 feet deep.

@ZR1Terror 5 жыл бұрын

Plumber Man I don’t like to tunnel, I’d rather cut the slab and put some new drain lines in. Tunneling is too dangerous In my opinion.

@nholt 5 жыл бұрын

And down in the Houston area they have that black "gumbo" dirt.

@coreywoods1925 5 жыл бұрын

@@ZR1Terror hey may I get a advice how dangerous is tunneling because iv done 30ft of tunneling this week and well it was also pretty messy from the sewage..I wear a tidevic suit that was pretty cheap that ripped must of the time and a fresh air mask .. is that enough for my safety?

@ZR1Terror 5 жыл бұрын

Corey Woods Well the sewage is one of the safety concerns but what made me not want to do tunneling is that here in the local news, they talked about a man who was tunneling and he took an extension cord with him and water started accumulating in the tunnel. The extension cord had a tear and shocked the man and couldn’t get out and died. I don’t know, I guess I’m cluster phobic and I will avoid putting my employees through that.

@enkrypt3d 6 жыл бұрын

how much does something like this cost?

@enkrypt3d 4 жыл бұрын

@Gaming and Technology Fun LOL ok... *eyeroll*

@jxtdenco6984 2 жыл бұрын

Whats the average cost per foot compared to replacement? Will this method work if there is a dip in the sewar pipe?

@cdramafpv Жыл бұрын

What did you with your situation. I currently have dip and I think this is what they want to do.

@jroc01 2 жыл бұрын

Simply Amazing.

@tii2015 4 жыл бұрын

Great video! I'm curious... how much does the new liner reduce the I.D. of the existing pipe? Does the (fractional) reduction of the the I.D. cause any concerns with code requirements? I wouldn't think so, but thought I'd ask. TII

@johnsmith-wc8gs 4 жыл бұрын

Simple answer is no it will not cause any concerns with code requirements. It will make the system work better as it greatly reduces the friction

@mikeytherookieplumber9624 4 жыл бұрын

The inner diameter is decreased by 1/4in. For those interested in learning the steps to shooting a liner, check out MIKEYTHEROOKIEPLUMBER here on youtube.

@sacpac8480 2 жыл бұрын

Who cares, asking as the pipes fixed. what they don't know doesn't hurt them.

@nexusone5584 2 жыл бұрын

@@bossudude420 makes absolutely no difference.

@Fattony6666 2 жыл бұрын

no it does not

@princesunnyboy 3 жыл бұрын

When it's hard, it's ready to go 😃

@nesco713 3 жыл бұрын

Wow great process.. seems like it would cost a lot. Maybe I will stick to my roots....

@lindaklein1044 4 жыл бұрын

what is this process called and is it available everywhere

@mikereynolds6118 6 жыл бұрын

What about snaking it in the future? Will it hold up to my sectional snake that has a 1 1/4 cable...or will cut right through it?

@dmo848 4 жыл бұрын

If I can't clear a clogged you got a problem

@mikeytherookieplumber9624 4 жыл бұрын

The manufacturer does not recommend snaking lined mainline and jetting is highly recommended for any future backups. Personally, a cured lines is stronger than ABS and the chances of a blade cutting through the liner while rubbing against is very slim. Just to cut through a collapsed or tie ins liner, you need a picote to grind it out. Maybe i will make a video demonstrating such

@FelonyRecords 4 жыл бұрын

If possible, I'd recommend a SDR pipe burst as liners can fail and do not last against being snaked. Liners are just coating the problem and the roots are still inside the system. Mother nature will win over time, expanding the liner between the cast iron/clay/abs pipe and causing a blockage.

@HarryGoulding 2 жыл бұрын

the roots are definitely NOT inside the system once a liner is installed. The liner is the system and that epoxy makes them hard AF. Highly doubt they would fail during our lifetimes

@FelonyRecords 2 жыл бұрын

@@HarryGoulding I’ve seen it more than once.

@fablenumber1fan 2 жыл бұрын

@@FelonyRecords seen it hundreds of times myself in the UK, chamber to chamber liners are ok, but these patch lines cause more issues than good over time.

@cullen4925 Ай бұрын

id love to know how much this costs in 2024 lol

@pepino735 7 жыл бұрын

there still was a small bump at the fitting connection where the roots were getting in that could restrain the waste again...

@janebishop5885 2 жыл бұрын

Impressive. I'm wondering about degradation of the material over time and if dangerous chemicals can enter the water treatment facilities and perhaps not be cleaned up before discharging into water systems?

@neo214 2 жыл бұрын

No more dangerous than liquid plumber over and over and over.

@cometcal2 2 жыл бұрын

This method sounds more ideal for sewer pipes

@DixieNormous6625 6 жыл бұрын

That's a fine piece of equipment

@davedube1148 10 жыл бұрын

It's called In situ (pronounced In sitch u). Large diameter sewer pipes can also be re-lined that way.

@heroknaderi 3 жыл бұрын

Incredible

@areesvalles1800 5 жыл бұрын

Holly fluxs. Who came up with that 1. That's pretty cool

@kevinroberts9580 5 жыл бұрын

So you put a stent in the heart of your plumbing sewer system

@StrongLikeBullTV 3 жыл бұрын

Brilliant invention

@infotainment999 4 жыл бұрын

Cool idea but how much do you lose in diameter, and would the root be able to puncture it?

@BradiKal61 4 жыл бұрын

Epoxy is like solid plastic so i bet that first the roots wont sense any water to look for and the liner is too tough to push through.

@dukeman7595 8 жыл бұрын

Richard Trethewey has been around a long time and is a licensed plumber. If he feels this is a good process I would say it probably is, however, what's the cost ? This will be the real test, if it's a lot more expensive than replacing the old pipe than it's not wort the trouble or the chance it will not hold up.. What's the cost per foot and the availability regional wise ??

@Zyxi7 7 жыл бұрын

As i have worked with this tech and other trenchless tech, i can tell you this is much cheaper than the old way. If your pipe is under the slab, you have to tear up the concrete. Tearing up the concrete means youre most likely dealing with asbestos. The cost of containing asbestos and getting rid of it can easily surpass the price of epoxy lining. This doesnt include the digging, trenching, and installation of pipe(most of the time its the same pipe that needs to be replaced). So, to replace the pipe without the liner, you can be looking at around 5-20k if youre dealing with asbestos. Epoxy lining is anywhere between 2k to 7 or 8k for about 50 feet of pipe, depending on who does it and what method. Some methods use different epoxy and some have either a blow in place method or a drag in place method. This video shows the blow in place method which is normally more expensive

@zazarays 7 жыл бұрын

why not dig a trench under the house?

@Jesse-gv9tf 6 жыл бұрын

7.5k here in Los Angeles 4/2017

@victorf2678 6 жыл бұрын

Janahreturns Which company did your liner in L.A.?

@ryanduderty3963 5 жыл бұрын

Same question what company was used looking to da also