Thank you SO much. This worked PERFECTLY for me. My regulator had been replaced by a plumber about 10 years ago and failed last month. The inside was a rusted mess, although the only thing actually 'broken' was the small rubber O ring. I ordered the repair kit from Amazon for around $60, and with a couple of hours work (the two plugs at the bottom were frozen solid and needed a lot of work to remove which added an hour) I saved a $400 (or more) plumber's visit to replace the valve. The only difference between my 1" device and the one in the video was that the new stem was not a threaded stud at the top , but instead was a tapped hole so the diaphragm was attached with a supplied bolt instead of the nut in the video. It all went together exactly as described otherwise, and when it was done I turned on the water and no leaks and set the pressure for for 65 psi using a meter I had. Excellent no nonsense video. Grateful for your time in posting this.

Thank you! Helped a lot! Saved $200 as the 1" Zurn valve is now $264 at HD.

EXCELLENT ! Your great video saved me $400 !!!

Thank you so much for this video. Successfully gutted my reducing valve today. Took my time and now no more whistling and water hammering every time I turn a faucet on. Checked water psi and set to 60. Thumbs up!

So that's why the bell housing is shaped like that--because there's a big compression spring inside. I always wanted to know that. Great video. Thank you.

What a legend, this video is perfect. Thank you!

Thanks for the video really helped my confidence. Got it fully done in about an hour and no more high pitched noise when the water flows. Thanks!!!

What a great video. Very informative and straight to the point. Thank you so much.

Thank you - mine is a different model but this gave me confidence that I can tackle the job! Your style is direct and no-nonsense, keep it that way!

Great job !!

Direct and to the point! Thank you

Thanks you so much for this video. It was very helpful in replacing the guts of my Wilkins 600 regulator with the the RK34-600xl kit.

Great video. Straight to the point.

Thank you, sir. Great instructions…works like a charm. I saved $$ by doing this!

Worked great. Thanks for giving me the confidence to try the repair myself. I will confess that I have checked it for leaks a few times since I did the repair last evening, but I am a little paranoid about water leaks. Nice to have it working again.

The instructions were terrible and I had a leak! Your video was perfect as I had the friction ring installed on the wrong side. Thanks!

Good job.

Excellent Video Thank You!

Wow I’m not sure what yoU do in your everyday job BUTT yoU should consider presenting yoU aRe brilliant well done SIR

Thank you.

Does it mean mine is bad if the water is surging ?? It’s not a constant flow

How big are those large pipe wrenches?

Thank you so much! I was just replacing faucet cartridges and a friend said it might be the regulator. Got the same one you have ;) and sure enough, I have 118psi :( I'll get the kit and give it a go! Can you help me better understand what "not over tighten the plunger" means? Also, when I reassemble the plugs should I add teflon tape or anything like that? I subscribed to your channel because of all the help in this video! Thank you again!

This is very good to know about it's, but do they sales those repairs kits for us and where to buy it from? Thank you so much for showing us how to repairs this

But it only happens when I use the washing machine ?