Fishing Rod Strength Test After Repaired : kzfaq.info/get/bejne/nrlmZbqb36jWmok.html

Thanks - it works! I just repaired my 9' fly rod with a break in the first section. Had to find something thincker than a nail to fit but it seems to work well.

I used fiberglass sticks. They sell them in different sizes at Harbor Freight. $8 for a small pack. Worked perfectly with thread wraps and Epoxy. Now time to go test it out on some big Pike 😎🤙🏽

Sir I HAVE MAD RESPECT FOR YOU. I BROKE MY ROD TIP HEADING OUT THE DOOR FOR A TOURNAMENT THIS WEEKEND I COULD CRY. I SAW YOUR VIDEO AND WENT TO WORK. I HAD A MICRO ROD YOU KNOW REALLY THIN AT THE TOP. I GOT A SHAKEYHEAD HOOK THAT WOULD FIT CUT IT AND WENT TO WORK. I FEEL MUCH BETTER NOW. YOUR VIDEO SAVE MY HOME BECAUSE IT WAS GOING TO HELL TO TALK TO ME FROM NOW TO THE WEEKEND 😆 🤣 😂 😹 😆 SO GLAD GOD LEAD ME TO YOUR VIDEO AND TO NEVER GIVE UP. THANK YOU 😊 🙏 😊 🙏 😊

Я много лет занимаюсь ремонтом удилищ. Мой совет- ни в коем случае не пытайтесь отремонтировать бланк так, как показано здесь, колено будет в дальнейшем расщеплено в месте стыка. Внутреннюю вставку следует сделать из того же материала, что и удилище. Склеивание лучше выполнить эпоксидным клеем, супер клей , со временем становится хрупким и выкрашивается . После того как вы соединили поломанные части, нужно демонтировать кольца на бланке выше места перелома. Подобрать кусочек какого либо колена от удочки, которое плотно оденется на поломанное удилище в месте склейки. Достаточно трубки длинной 6-10 см.сажаем её на эпоксидку. По краям трубочки делаем нитяные бондажи и покрываем их эпоксидкой. Устанавливаем на место кольца. Ремонт окончен. Подмотку колец можно производить обычной ниткой, использовать для этого плетёнку нет смысла. Момент и подобные ему клеи для работ по ремонту удилищ не годятся.

Just done this today. only thing I done different is put a coat of clear over the nylon and cured it under a uv light .Turned pretty nice glad to have my rod back .

Worked beautifully sir, even for an amateur like me! Thank you for sharing!

I've fixed a couple of fly rod tips in a similar way. Since the rod is very narrow at the tip, a 2" sewing needle works well as the insert (you might need to clip off the eyelet). Sewing needles seem to have enough strength and stiffness, plus you can find one in a diameter that will fit snug enough. Alternatively, you can get loop end wire shafts from a lure making supply store which are made from stiff, springy steel (I used .035"). Also, you'll need to add at least 1 but preferably 2 sewing needles (or wire shafts) on the outside of the break as splints. Glue in the insert then wrap the splints and spread a thin layer of epoxy over the threads. I use dental floss because its strong and flat. Waxed or unwaxed floss works as long as you coat with epoxy. Put the splints on the sides of break and not along the top/bottom. This way there is less of a bump along the bottom where the fly line runs. I have mixed results as to whether the action and accuracy of the rod is affected with dry flies (I notice no issue with nymphs) but at minimum you can fish until you order a new tip and then you'll always have a backup tip.

Thank you for this. You’ve saved my old fly rod.

_Solid metal placed in the rod can make the part on the rod connection stiff and easily broken due to strong pressure by the fish, i used a fiber stick from amazon for only 2 dollars for 100 cm_

I've thoroughly enjoyed your knot tying videos!😊 I started building rods (Professionally), in mid 70s (I think 1976), and I don't mean building a fly rod, as those are ridiculously easy to put together!! I'm talking about boat rods with roller-guides and pack-rods (4 or 6 piece high quality rods), out of a 1 Piece Blank, meaning that I had to make my own ferrules!! And then I'd do anything from "perfect" Half & Half Diamond wraps that took 8 to 10 hours non stop!! By half and half, I mean half the Diamonds would be one color and the other half another. And many more like the U.S. flag with the stars and all, or Eagles etc. and it would take many wraps of thread to create. At any rate, the rod with the Nail would have one heck of Dead Section!! This of course would be no problem with even a Trophy Bass, but certainly not with a Big Steelhead or any fresh Chinook/King Salmon (fresh out of the Pacific Ocean)!! I still catch a good number of Kings going to 40 pounds or larger!! Again I can land any Bass with just about any rod or hand-line!! Someone else mentions the use of broken rod pieces, which makes a lot more sense!!

This was ridiculously therapeutic haha. I really appreciate all of this!

Good Evening My Friend blueparay, Thank You for your detailed video on "How To Repair A Broken Fishing Rod." I to have experience a broken rod or two in my 35 year quest in fishing multiple spicese of fish! I to once implied the same techinque to repair a broken rod that a BEST FRIEND gave me. 🙂I Treasure the fact that YOU took the Time and EFFORT to Divise such a Detailed Video. Thank you once again my Fishing Friend for Being So Understanding and Compassionate for Our Sport of Fishing and the Millions of Viewers that watch Your Program! You are a TRUE Inspiration to US ALL!! 🙂MAY GOD "BLESS U & U'r Familiy! Sincerely, Mr. Carl Joseph Gwizdala aka "DESPERADO." 🙂

Mandou bem amigo ja sei que tem jeito👏👏👏👏👍👍

That's cool I used the nail and different glue about 30 years ago but it works. Still have the rod! It sucks to break a $100+ rod and just let it go.

I was so upset when my new fly rod snapped today. This is is great! Beautiful video! Thank you

It wasn’t an extra repair I wish I had seen earlier over the years thank you for posting that

Going to watch this on repeat while I fix my fly rod. Thanks mate!

Gostei muito do truques, mais uma que eu a prendi, porque sou um pescador e gosto de coisas novas parabéns muito bom

Awsome job and thankyou for the tip as I got a awsome shimano rod and reel for Xmas and snapped the end off trying to land a big flathead so much appreciated sir 🙏

I ordered a fishing rod 3 months ago and it arrived yesterday. A friend broke it today. I cried for 4 hours. So thank you very much.

Just had a rod tip break the other day and then found this. Providence! Easy to understand. thanks.

Cách sửa chữa cần bị gẩy rất hây cảm ơn bạn đả chia sẻ video cho những cần thủ có cần câu bị gẩy👍👍👍

Thanks its happened to me so many times and I would just trash it or in my boat getting snapped on brush going to a favorite spot and bam . Now I'll put this in my tackle box, thanks again.

Muito bom..estou com uma quebrada...pensei em fazer a mesma coisa...a diferença é que quebrou na parte mais baixa é grossa...mais o processo é o mesmo...valeu

I’ve used a piece of another broken rod to insert as the splint between the broken pieces or have slid the broken pieces into the splint instead of using a nail. When gluing the pieces together with super glue, if you sprinkle baking soda into the wet super glue it will instantly set up as hard as a rock and fill the gaps between the rod pieces. I also use 2-part clear epoxy on the rod wrap threads instead of super glue. I have also shortened the rod until I got the lower section large enough for the broken tip section to slip inside it before gluing.

Damn! I wish I saw this video about a 100 broken rod’s ago! Awesome! Thank you!

I just bought a rod online that showed up busted like this. I was going to just return it, but I think I'll consider it an investment in self sufficiency and just go ahead and figure out how to fix it instead. Thanks for the inspiration.

Outstanding video! worked great! my fly rod is good as new after my wife put up the window on it. I used a brad, which I filed to a taper, and JB ClearWeld. Upholstery thread, black. Thank you, thank you.

Parabéns boa dica ..

today my fishing rod was broken, it was very similar to the broken position like in the video, now I found this video as a solution, thank you very much

What type of thread did you wrap it with? And was that the same glue you put on the outside or something different? Thanks

Muito bom, nunca é demais aprender novas técnicas pra arrumar uma vara de pescar 🎣

Bom dia parabéns bela explicação uma ótima dica como restaurar uma vara de pesca

This is a really good video. Very informative. Thank you

Mantap boss... untung joran saya yg patah belum saya buang, nemu solusinya sekarang, terima kadih boss🤝🤝

I really wish I would have known this technique many years ago. After coming back from a bass fishing trip to Florida I was unloading my boat at home and my favorite rod had it's tap broken off buy the screen door closing too fast. I had tens if not even hundred of thousand cast on that rod. It was so old that they no longer made it so I could not replace it.

Great video, but you should list all the things you used for the repair and where to get it.

Verdaderamente, magistral, sin casquillo y conserva la flexibilidad.

Jetzt wird es wahrscheinlich unter den eingebauten Zapfen demnächst brechen......,aber schön gezeigt,Danke

If needs must it’s a solid repair but it would create a flat spot in the blank and affect the action of it when put under strain. I cannot fault you for saving your rod though👍

Good idea...I have an old rod which I loved, but got broken by a friend accidentally stepping on it. He bought me a new rod, although it's not the same as my old favourite. I might give this a go, although it may affect the action of it. Worth trying though. 👍

Really nice way to fix your rod.. thank you for sharing 🎣

Vraiment inspirant, beau travail...MERCI !! Very inspiring, nice work...THANKS !!

Muito bom! Parabéns.

who hasn't found a discarded broken rod along the shore? I always gather the tip end to use sections as an insert instead of a nail. Strength is there plus the flex.

Hi,great video,after putting the thread on,you heated it up with a lighter. Did you put a heat shrink tube over the thread?

Permisi...Alhamdulillaah tetima kadih banyak kawan dudah berbagi Ilmu...semoga manfa,At .....suksrs selalu..👍👍🙏

Thanks a bunch. Just broke my favorite rod, hiking through heavy Forrest, and brush. I was crushed. Jumped on KZfaq, and found this simple fix. Even looks like good meditation. But can you tell us what kind of string you're using when you wrapped the black string around it, and heat shrink it? That'd be awesome.

Гвоздь это конечно круто!, долго не протянет, вместо гвоздя нужно(желательно) использовать гибкую вставку, например от сменных вершинок, живучесть повышается.

Thank you! It works! 🙂👍👍

I broke mine in a car door shortly after building it. It was the first fly rod I ever built. I came up with the same idea but I used epoxy at the time many years ago. Thanks

Excelente, a minha qbrou. fiz a mesma coisa e está belezinha. Já peguei muitas tilápias.abrç..

Есть ещё проще вариант:вставку сделать не из гвоздя, а из стеклопластика( китайские дешёвые вершинки).

merci pour cette formidable astuce. (France) 😉👍

A good valuable piece of knowledge. Thank You. I am more happy that I got an Ugly Stick coming though.

Ótima dica amigo muito obrigado por compartilhar seu conhecimento

That is basically what I do to repair a break but I use a fibreglass piece off another broken rod & glue in the break. I bind over it & then if the break is close to a runner I’ll remover the runner & bind the runner in place over the break. Been successful repairs from beach rod to small spinning rods. Curious as to what glue you use here. I’ve been using 24/hr Araldite. 👍🏻👍🏻🇦🇺

buena noche excelente tutorial muchas bendiciones

Terimakasih bos... Sangat membantu tutorialnya... Pas joran kesayangan patah 😥

Simples e perfeito. Maravilhoso!

When my rod snapped my heart literally broke

Phenomenal Job Absolutely 💯 % Thankyou

下次会从铁钉前端的位置断，而且杆的受力也没有之前好了？

Hi, what Kind of yarn / filament did you use? cheers!

I would personally use fiberglass then epoxy that in before wrapping, something as rigid as metal seems like a bad idea in a rod and would really screw up the proper action and just lead to it breaking again.

Excelente consejo, muchas gracias¡¡¡¡

Definitely going to try. My rod broke lower down on though but still I'm going to get it done. Thanks for the info

This is great but it would be nice to know the supplies used to fix it?

the materials that are used is standard super glue and nylon thread (fishing line). the lighter is supposed to shrink the thread hot air blower will do as well. good luck

Keren ilmunya.... Terimakasih bang....👍👍👍👍

show de video, ótimo. Qual a bitola de de multifilamento você usa para fazer o remendo? Esta cola da finalização sobre a linha é de secagem rápida, tipo bonder?

Также сделал, но вместо гвоздя вклеил кусок стеклопластика от старого удилища. Легче в 1,3 раза

If you don't have any thread could you use heat shrink tubing?

Saludos desde 🇨🇱, no pensé q fuera tan censillo.... 👍👍👍

감쪽같네요. 저도 낚시대. 부러젔었는데 좋은 팁이네요. 잘활용해보겠습니다^^

Если уже таким способом ремонтировать то хотя бы для приличия края у гвоздя на наждаке закруглил бы ато острые углы при нагрузках со временем расколят стеклопластик а по нормальному надо бы стеклопластик пустотелый вставлять внутрь ИМХО :)

I use a 6 to 7 inch section of a. bicycle tire spoke. So much more effective and longer giving more support to the fractured area. My dad taught me this, decades ago.

Very helpful. Great video thanks

I have a rod my dad used for fishing called a Black Marlin, but it is a surf rod. It has a stainless steel inner, and the rod was created around that. It is about 9 to 11 feet, and I have caught everything and anything on it with an old Penn 49, from sharks to whatever you can think about around the South African coast line. I also have a shorter rod where I used a Penn 500 on, come to think of it I still have brand new one in a box, man did I love that 500, it could cast all the way to the horizon. I suppose you have all gathered I am an old timer, lol!!!

Using a nail to fix a broken rod section will destroy the action of that rod, better to use a section of another broken rod epoxied in place to join the two pieces, epoxy is more flexible than superglue which will eventually break, you can also use a piece solid fiberglass from a quiver tip to repair sections that brake close to the top eye which are too narrow to fit a section of hollow rod inside.

what nylon and what glue is used, thanks good video

Hebat dan luar biasa Tutorial penyambungan jorannya yang kondisi patah, sukses selalu kawan 👍👍👍🙏

I'm the kind of person that sees value in everything. And I also get a sentimental value from things I repair. Today I broke a rod like an idiot and I really want to buy what I need to repair it. Seeing this done with what I believe to be a watery cyanoacrylate, some thread and a metal is reassuring. Unfortunately my rod is in a bad way, it needs a guide and has two breaks in the tip. I think it's a little out of my hands because it broke in the first place because I tried to shortcut life and use a stone bench grinder to attempt to remove a broken guide, slightly scratching a little deep in the the rod creating a weak point where it snapped, and somehow snapped like 10cm down the rod in another spot. It's like my only decent rod too I'm so sad..

Спасибо зам мастер клас, по ремонту училища🇷🇺🇷🇺🇷🇺

Для начала надо научиться отличать удочку от спиннинга, а плоскогубцы не идут в сравнение с сопротивлением рыбы.

Thank you for the video! Very helpful!

Dapat menambah ilmu baru..terima kasih videonya

釘か…。 でも同じ要領で他の素材(釘より軽くテーパーやカーボンに馴染みそうな)を探せば、何かいいのがあるかも。 あとは愛情でカバー、だな。

Just by that knot I can tell 100% you tie flies Edit: that was a really smooth hand whip finish

Thank you for the inspiration friend. Good thinking

Thanks for sharing this vedeo master..we have my rod is broken..

Just got a custom made ultralight rod yesterday. $250. Tip got snapped by my kayak lid before I even got to use it once.

The rod whil always go break on the edge of nail, no matter of the glue,thread or whatever

Sangat mmbantu bang ilmunya,, Sukses trus..😀👍

Very nice thank you for showing it on you tube have a nice day 😉

Идея правильная - воплощение никс. Внутрь по диаметру стеклопластиковый кусочек 5-6 см на клее супер-гель, выровнять соосность без спешки, клей позволяет. Сверху шину из полосок 1-1,5 мм ( с кусочка старой удочки), длинной 5-6 см на клею. Сверху бандаж из капроновой нитки, пропитать клеем 505 секунда (хорошо пропитывает).Все. Далее на вкус - клеем двухкомпонентным 5-ти минутка. Для красоты и аккуратности.

一点に力が集中するからすぐ折れるよ

Thank you very much . Nov. 22nd 2021 Mon. 11:24 am from Yokohama City Japan

excellent work ---bravo