No video
How To Repair Dash Bezel | Ford Bronco OBS F150 F250 F350 | 3 Common Issues
Рет қаралды 26,124
Күн бұрынThis video provides Dash Bezel Dash Trim repair for Ford Broncos and F-Series trucks F150 F250 F350 The three most common issues: 1.Broken Mounting Pins 2. Broken Switch Bosses 3. Screw Hole Repair Behind the Horizontal Trim. Bezel removal video link is below!! #bronco #fordbronco #f150
PLEASE HELP SUPPORT THE CHANNEL IF YOU ENJOYED THE CONTENT.
PayPal: n2kpi@yahoo.com
Venmo: @broncosandparts
Cashapp: $broncosandparts
It really help with keeping the videos flowing, the lights on and with shop supplies. Even a few bucks.
Letting all the ads play during the video also helps a tiny bit too.
Thanks!!
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Please Like and Subscribe.
LINK TO BEZEL REMOVAL !!!
How To Remove Dash Bezel / Cluster Bezel | Ford Bronco OBS F150 F250 F350
• How To Remove Dash Bez...
*************************
Product Links:
J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz
amzn.to/3Ci5KNp
FROGTAPE 1358464 Multi-Surface Painter's Tape with PAINTBLOCK, Medium Adhesion, 1.88" Wide x 60 Yards Long, Green
amzn.to/34jsMHa
*************************
Follow along on:
/ broncosandparts
@broncos.and.parts on Instagram
Email : n2kpi@yahoo.com
We sell used Ford Bronco and Truck Parts
@BroncosandPartsGarage 5 ай бұрын
87-96 Ford Bronco/ OBS Ford F-Series Bucket Seat Cushion is on sale for $135 plus ship. Will not fit 40/20/40 (these are in preorder status) I take Venmo, PayPal, Zelle, Cashapp or mail me a check. Email me at n2kpi@yahoo.com for more instructions. Please remember to include your full name, EMAIL and mailing address
@bradenturner9573 Ай бұрын
thankyou very much for these tips as a 16 yr old i appriciate the advice for my 97 superduty
@BroncosandPartsGarage Ай бұрын
No problem. Fun easy fix!!!
@beauxtibideaux9919 3 жыл бұрын
Nice! I linked over from the OBS Ford Trucks FB page. Glad I did.
@BroncosandPartsGarage 3 жыл бұрын
Thank you !!
@MrBana232 4 ай бұрын
So glad I found this video and channel. Going to repair my old bezel this week.
@BroncosandPartsGarage 4 ай бұрын
Glad I could help. I sell the pins and screws!
@DayAfterDay24x7 2 жыл бұрын
Thank you! I have a 95’ F150. I bought a new replacement dash for it, but didn’t include the 3 metal pin-clips that go along the top. It looked like I could screw them on, but I didn’t know how to get a screw driver in them. Your demo popping them open, nipping off little tab, and using skinny screwdriver saved the day! Wish I had found this sooner I would have JB welded the thing back together and save some $$.
@BroncosandPartsGarage 2 жыл бұрын
glad it helped! Lots of OBS videos here!
@jacksmail7725 2 жыл бұрын
Another nice Ford video.Thank you.. I need these 3 clips for the 95 Bronco... Also...Solved the problem of the broken plastic screw mounts for the rear window and for the 4WD functions my making brackets for each and mounting the switches to the dash. The bezel goes on and off a lot easier too. Thanks for all your handy videos !
@BroncosandPartsGarage 2 жыл бұрын
Glad it helped. Was my first video ever. I’ll have more pins avail to buy in about 10 days. Email in description.
@TheCrofolks Жыл бұрын
Thx, Chris. Another fantastic video with great insights and perspectives along with an easy to follow, step-by-step narrative approach and practical hands on demonstration. Keep up the great work, my friend 🎉👍👏👏
@BroncosandPartsGarage Жыл бұрын
Thanks!!!
@Itmonolith Жыл бұрын
Thanks brother! I just picked up a 1994 F350 and this is just one of the many repairs this old girl needs (on my budget). Appreciate your videos and content. Now if you had a good one on best way to re-align the driver door on my rig I'd send you some beer. ;-) cheers
@BroncosandPartsGarage Жыл бұрын
Change the hinge pins!!! Or replace the striker bushing!!!
@michaelpittman5025 4 ай бұрын
Thanks I’m currently dealing with this same problem and you really helped me…
@BroncosandPartsGarage 4 ай бұрын
Fantastic. I sell the pins and screws too.
@sirrahca 2 жыл бұрын
thanks for the tip about the top mounting screws. just what my '94 F-150 needed.
@BroncosandPartsGarage 2 жыл бұрын
Perfect!!
@Christineb332 2 жыл бұрын
Thank you for taking the time to make this! I think these techniques are gonna save me some serious $$$! 😅
@BroncosandPartsGarage 2 жыл бұрын
Thank you. Glad it helps!!!
@ericdreher8902 3 жыл бұрын
Hell yes. Yet another great video and saving me some money.. Nice man. Really appreciating the time you are taking with these videos...
@Trydntru 2 жыл бұрын
Saw your FSB forum post. You do a great job hope to see many more. Keep up the good work.
@BroncosandPartsGarage 2 жыл бұрын
Thank you
@jaredmigdal 3 жыл бұрын
Super detailed and clear. Thank you!
@BroncosandPartsGarage 2 жыл бұрын
Hope it helped and saved you some $$
@noahwiggins2452 3 жыл бұрын
Good video Chris! Would’ve never thought of the water weld. Always tried to use jb quick.
@BroncosandPartsGarage 3 жыл бұрын
Both would work I just chose water weld because it sticks to plastic the best
@ghilliettv 2 жыл бұрын
again, great detail. no fluff. all how to!!
@BroncosandPartsGarage 2 жыл бұрын
Glad you liked it!
@dariohernandez7745 2 жыл бұрын
Esa bronco es toda una belleza
@BroncosandPartsGarage Жыл бұрын
Thank tou
@craigj20 2 жыл бұрын
You made an interesting comment in the description you get more "credit" if viewers let the ads play rather than skipping them? I didn't know that, I am going to start watching more ads now. The more you know! ;)
@botoepfer546 Жыл бұрын
Awesome video, Thanks Chris !
@BroncosandPartsGarage Жыл бұрын
Glad it helped!!!
@sumwattdamagd 2 жыл бұрын
thanks so much for this video! it's exactly what I needed to know.
@BroncosandPartsGarage 2 жыл бұрын
No problem. Enjoy!!
@dcstang67 3 жыл бұрын
This is a great video. Hopefully it will save some of the unique irreplaceable Bronco bezels that would otherwise be thrown out and replaced with F150 bezels. Can you tell us what size screws you use for the 3 top pins?
@BroncosandPartsGarage 2 жыл бұрын
I had a bin laying around. I could mail you some
@jsanford19791 2 жыл бұрын
where can I find the three top pins. I am missing them.
@BroncosandPartsGarage 2 жыл бұрын
I’m out of them right now. Email me in a few weeks. I sell used bezels too
@stockman204 Жыл бұрын
@@BroncosandPartsGarage Can you point me to where I can get some of those mounting pins?
@jimmccorison 11 ай бұрын
Great video. Thank you.
@BroncosandPartsGarage 11 ай бұрын
You are welcome!
@jimmccorison 11 ай бұрын
@@BroncosandPartsGarage I got the bezel off, and yes, somebody had yanked on it instead of unscrewing it. They did it hard enough with break off a chuck of the bezel just above the trim piece, but not evident from the front. I was thinking of using JB Weld to glue it together across the back side, or do you think there's a better approach?
@frankjohnson7640 2 жыл бұрын
Game Changer
@BroncosandPartsGarage 2 жыл бұрын
Thank you
@duckhunter8387 11 ай бұрын
Nice Tips!
@BroncosandPartsGarage 11 ай бұрын
Thanks!
@michaelstrane3254 8 ай бұрын
Hi... In the video you use Water Weld, but in the description you link to Plastic Weld. Which one do you recommend? I used Water Weld yesterday and the little lumps I made to replace the bosses are still squishy 24 hours later
@BroncosandPartsGarage 8 ай бұрын
I used the water weld because it specified plastic as a key material it sticks too. As you see, mine set up pretty quick. I did have one bad batch on another fix. Perhaps you got a bad stick as well. It really needs to be mixed well.
@6401longpoint 2 жыл бұрын
Great video!
@BroncosandPartsGarage 2 жыл бұрын
Thank you
@jeffreypauwels3722 2 жыл бұрын
Hey Chris, just found this channel. Great content. I just picked up a '92 f150 Flareside Nite edition. The dash bezel is falling out of it. Just ordered the LED's anf JB weld. Going to do it all at once. I'm down in Temperance MI. Maybe I'll run into you some day.
@BroncosandPartsGarage 2 жыл бұрын
Hit me up with any questions. Let the jb weld putty set up a little longer than I did in the video. You’ll be fine. Head over to “Broncos and Parts Garage” on FB and introduce yourself.
@edwincastellanos1125 7 ай бұрын
I would like to know how to repair or even to replace the inside door plastic as look like bad and I’m holding it with tape so need help where to get it new better . I have a 1996 f150 5.0 single cab
@BroncosandPartsGarage 7 ай бұрын
Email me some pics. My Email in video description
@crueljimi Жыл бұрын
Awesome thanks…
@BroncosandPartsGarage Жыл бұрын
Our pleasure!
@gregorydigiovanni1466 Жыл бұрын
Chris, always great content.. Have a couple OBS here in new mexico, you keep mentioning rust. What is rust? (lol sorry had to man).
@BroncosandPartsGarage Жыл бұрын
That’s mean. Just mean bro. Lol
@jonathanclague942 2 жыл бұрын
Shoot! Great videos, thanks, but as I peel apart my Bronco, I have two issues: 1) don’t even HAVE the top clips (do you know where I can find them?), and 2) what size screws should I use for the rear window and 4wd switches? Mine were, if you can believe it, TAPED to the back of my dash bezel
@BroncosandPartsGarage 2 жыл бұрын
In description there is my email address. I sell the top pins. Click on title to see description.
@kevintate7895 Жыл бұрын
Chris thanks for the video! Do you know what size screw you used to reattach the clips?
@BroncosandPartsGarage Жыл бұрын
Small!! I just had a box of about 1000
@BroncosandPartsGarage Жыл бұрын
Email me. I’ll send you a pic of the size
@JoshWellborn 2 жыл бұрын
Thanks, Chris! I did all three repairs. Question: what size are the screws that hold the 3 clips in place along the top of the bezel?
@BroncosandPartsGarage 2 жыл бұрын
Tiny. Lol. I’m not sure. I has 100’s laying around. I could mail u some. Just pay postage
@hrodriguez112 2 жыл бұрын
will you do a fog light switch install. like one from a lightning.
@BroncosandPartsGarage 2 жыл бұрын
We have a lightbar switch going in
@duelinsandi 4 ай бұрын
Great video! Even I could do it. Ebay sells the clips for 36.99 for 3. Which I think is rediculous. Is there anywhere else I can buy the clips? Ok. I found it 4.99 for 20 at amazon.
@BroncosandPartsGarage 4 ай бұрын
Good luck!
@NightFight164 Жыл бұрын
I can’t even find a 19 96 Bezil ,, I ordered a new one and instead I got a 3-D printed bezel with no defrost slot. Where do you get the 1996 Bezel? Ty
@BroncosandPartsGarage Жыл бұрын
I sell them
@fordfreak2007 3 жыл бұрын
The problem I have with the three clips is that they don't stay attached to the bezel when I remove it. They just pull off the plastic "nipple" that's they attach too. Do you know of a good fix to keep that from happening?
@BroncosandPartsGarage 3 жыл бұрын
That’s a great question, it’s addressed in the video and I show you how to permanently mount those top pins to the bezel itself. Fast forward to the eight minute mark on the video
@traubgator 3 жыл бұрын
Any chance you know where to get that exact bezel replacement that has the whole for the defroster switch. Seems nearly impossible to find….
@BroncosandPartsGarage 3 жыл бұрын
I sell them. Used. Email me n2kpi@yahoo.com
@sterlingdavis1177 Жыл бұрын
Where can I buy a dash bezel and other dash parts?
@BroncosandPartsGarage Жыл бұрын
Click on video title. Scroll down to description and shoot me an email.
@michaelstrane3254 8 ай бұрын
@broncosandpartsgarage how can I contact you about purchasing some of those bezel mounting clips?
@BroncosandPartsGarage 8 ай бұрын
My email is in video description. Thx
@freebird086 3 жыл бұрын
Hey Chris.....subb’d
@BroncosandPartsGarage 2 жыл бұрын
Thank you !!
@BroncosandPartsGarage 2 жыл бұрын
Please don’t forget to subscribe for more content !!
@jacksmail7725 2 жыл бұрын
Ok..Now a subscriber. I really dont do faceB etc...where can we buy those pins / clips..Thanks in advance jP
@BroncosandPartsGarage 2 жыл бұрын
@@jacksmail7725 my email is in the video description. Just click on title. I’ll have pins in 2 weeks.
@dirtyeric2 Жыл бұрын
Do you have 3 mounting pins?
@BroncosandPartsGarage Жыл бұрын
Yes. Email me. I sell them
@dirtyeric2 Жыл бұрын
@@BroncosandPartsGarage just sent email
@vincas229 2 жыл бұрын
Do you have 1987 and 1997 f350 parts for sale for sale
@BroncosandPartsGarage 2 жыл бұрын
Yes. Send me an email.
@BroncosandPartsGarage Жыл бұрын
J-B Weld 8237 PlasticWeld Plastic Repair Epoxy Putty - 2 oz amzn.to/3Ci5KNp FROGTAPE 1358464 Multi-Surface Painter's Tape with PAINTBLOCK, Medium Adhesion, 1.88" Wide x 60 Yards Long, Green amzn.to/34jsMHa
Broncos and Parts Garage
Рет қаралды 8 М.
Broncos and Parts Garage
Рет қаралды 31 М.
Broncos and Parts Garage
Рет қаралды 111 М.
Broncos and Parts Garage
Рет қаралды 24 М.
Late Model Restoration (LMR)
Рет қаралды 5 М.
Broncos and Parts Garage
Рет қаралды 30 М.
Fix This House
Рет қаралды 726 М.
Shop Tool Reviews
Рет қаралды 1,8 МЛН