How to Repair Disassemble and Resolder Instrument Cluster Dashboard on FORD FOCUS
Рет қаралды 7,985
8 ай бұрынVideo: How to Remove the Instrument Cluster.
• How to Remove Instrume...
there is a part in the video , where I unbox a solder Iron , just skip it. I forgot to remove it when uploaded the video.
@MeFixingEverything
how to repair ford instrument cluster,ford focus instument cluster repair,ford focus instrument cluster fault,RMAutodiag,rmautodiag,ford focus not starting,ford focus wont rev,ford focus dashboard,u1900 can communication bus fault,u1900,ford focus immobiliser light flashing,ford focus immobiliser car wont start,ford focus instrument panel fault,stripping down ford focus dash,ford focus mk2 dash fault,instrument cluster repair,focus dash repair
@MeFixingEverything Ай бұрын
If this video helped you save some $$$, a coffee tip would be highly appreciated. Thanks !
@Stylie99 4 ай бұрын
This cluster matched my cluster exactly and instructions in the video were really useful. I bought a £15 soldering iron and have never done it before. My car is now fixed, thanks for the upload. Total time for me was hour and half.
@damienh4357 Ай бұрын
Did this yesterday on my wife's 2008 Mondeo. Hitting the top of the dashboard stopped being effective last month. After watching your video, i decided to have a go with nothing to lose. Working perfectly now, including some of the steering wheel controls which haven't worked for 3 years. Thanks for the video. €350 saved.
@lozboi3058 6 ай бұрын
Thanks for the upload! Just fixed my cluster and my car lives again
@vamshikrishna4079 3 ай бұрын
I am getting error Lost control with instrument pannel cluster and Lost communication with body control module Are these two because of same problem
@memory199726 3 ай бұрын
@@vamshikrishna4079 very possible to check if it is indeed when it happens give a big slap on the dashboard.. if the light goes away for a bit when you slap the dashboard then it almost 100% possible is the joints just like shown on the video
@kdeh21803 2 ай бұрын
Always found a fork works very good in pulling indicator needles off.............
@normamiller8553 3 ай бұрын
Cheers for sharing. I will not scrap my car just yet. Lol
@allsortsabouteverything 3 ай бұрын
Lead free solder is the cause of the problem with these clocks. Use 60-40 lead-tin solder with separate rosin flux. 👍👍
@vamshikrishna4079 3 ай бұрын
I am getting error Lost control with instrument pannel cluster and Lost communication with body control module Are these two because of same problem
@Ron0963 7 ай бұрын
A Fork works well to take off Dials.
@vamshikrishna4079 3 ай бұрын
I am getting error Lost control with instrument pannel cluster and Lost communication with body control module Are these two because of same problem
@MeFixingEverything 3 ай бұрын
I'm almost 100% confident , any other problems?
@Sandrone10 5 ай бұрын
the cost of the repair 250 euros, if I had seen this video before I would have tried to repair it myself...😢 Thanks for sharing it
OEM Denied Performance
Рет қаралды 60 М.
Action C Mini
Рет қаралды 79 МЛН
ElectrónicaCar
Рет қаралды 75 М.
ECU Connection UK (By JCcars)
Рет қаралды 64 М.
Werkstatt TV
Рет қаралды 98 М.
MotoringEvents
Рет қаралды 1,2 МЛН