To purchase new paddles/lifters at a great price follow this link: amzn.to/2yRDhyK In this video i show you how to remove and replace the paddle on a Hotpoint, Indesit or Ariston washing machine.
Пікірлер: 84
@dawnehoy6 ай бұрын
I removed them to clean them, as had musty smell in machine, used all the cleaning washes going, but nothing worked, was so easy to remove and replace, such clear instructions, Thank you . I now have a squeak on slow spin since cleaning them, probably just a coincidence, anyone else had this happen? Thanks
@royden19725 күн бұрын
Thank you for being clear straight to it video. Now I know how to sort the paddle in my machine. Thankyou !
@AntoKyuuketsuki Жыл бұрын
Added to my "Fixing Things (instead of breaking them)" playlist... All I needed from this video, was the reassurance to know it was the sixth hole and not the third, fourth, fifth, seventh, eighth, or ninth hole. Bought the replacement Hotpoint paddle from a kitchen appliance shop, which funnily enough was their last one and fitted it in less than three minutes to finally do the pile of washing I'd have done yesterday. Thank you for making this video clear. 😎
@lords-electrical Жыл бұрын
no problem, glad it was helpful for you
@Olga-zm2xc Жыл бұрын
It's a miracle! Amazing! I could never do that! And I had no idea that it was possible!!! Even now I don't understand how it works. But I did it!!! I am from Ukraine and never before I could find such clear tutorial in Ukrainian or Russian. Now I am completely happy (would be completely happy if there was no war in my country)! Thank you ))
@lords-electrical Жыл бұрын
Well done and thanks for the great feedback
@rachyj94002 жыл бұрын
Finally found the exact video needed for my model of machine, was only finding way more complicated ones or ones for other models. Thank you for putting this video up, I was starting to lose hope I’d find one.
@MyCountryIsSaudiArabia215 Жыл бұрын
Watching for no reason at all!!😂😂
@davewatson95364 жыл бұрын
Thanks v much. We are in lockdown, no plumbers allowed in! Couldnt have done it without your help.
@topherbeckett66955 жыл бұрын
A great demonstration and clear instruction...excellent. Thanks
@louiseevans63543 жыл бұрын
Thanks so much, i was so worried that I would have to buy a new machine but managed to fix it in about 1 minute after watching this. Massive help.
@vannersw14 жыл бұрын
first class Video, Took less time to fit than it took to watch the video, Thank You
@simonk92854 жыл бұрын
Excellent job. Thank you. Shortly after the 10 y. old paddles have been replaced with new by "technician", two of them just fell off. Used this video tutorial to fix them and now it's all fine. Thank you again.
@lords-electrical4 жыл бұрын
No problem, Thanks for the feedback.
@mt51442 жыл бұрын
Top Man, great video saved me loads of time......I owe you a Beer!
@robert3325 Жыл бұрын
A tremendous help, thanks for the education, I'm sure you've helped many either this great post. Regards. Rob
@pockigepestprezel20732 жыл бұрын
Thanks to you, I didn't have to remove the entire heater 🙌🏻 I could reach the lost piece of a bra like this. You saved my washing machine! 🎉
@lords-electrical2 жыл бұрын
Great feedback, well done on fixing your machine
@jimmcgregor62535 жыл бұрын
Excellent, a real help and very clear on what to do. Thanks.
@barbarybar4 жыл бұрын
Thanks for that. Paddles started to gall off after 10 years. So not bad.
@ondermetu2 жыл бұрын
Thank you very much for the life saver trick. Exerting the right angle to the tabble became the key move for us. By the help of this video we got over the detached baffle issue. Thank you again.
@HAREKRISHNALOVEWISDOM164 жыл бұрын
Thanks for the valuable information .....
@tvfighter Жыл бұрын
Thanks. You help me a lot!
@anncollette84373 жыл бұрын
Thank you for sharing and saving me some extra money to get someone out to do it for me.
@lords-electrical3 жыл бұрын
Glad to help
@mad72063 жыл бұрын
Thanks for the tip . I've just had a banging noise from the machine and I used this tip to make sure there was nothing left in the bottom under the drum
@lords-electrical3 жыл бұрын
Glad it helped
@niemandnenntmichprofessor8116 Жыл бұрын
Thanks for this useful information.
@stevetaylor94992 жыл бұрын
Very helpful thank you !!!
@acsni04025 жыл бұрын
Thank u very much the help!!!❤️
@benshipley34575 жыл бұрын
Great help thanks
@ICeTeaKusH4 ай бұрын
Thanks for the video
@tomaszkukowski89834 ай бұрын
Thanks a lot! Great job!
@MohamedAli-eb2yn Жыл бұрын
Thank you for your information
@fairwind8344 Жыл бұрын
Oh my, it's a miracle! I did it! Thank you so much!
@lords-electrical Жыл бұрын
No problem, glad it was helpful for you
@saffyreid879010 ай бұрын
Thankyou for the help x
@toyinphillip6 жыл бұрын
Thank you!
@samwallis17506 жыл бұрын
Can you do a video on the 23 hole one on an LG machine please
@palmo29522 жыл бұрын
Good show Pls my hotpoint washdryer had a broken paddle and the spring holding the paddle is missing. Pls how much will it cost me to get it replaced. I also want to change the programme panel write up cover as all has been bleached away. Thanks
@jessicasousa21775 жыл бұрын
Thank you! Easy to fix after watching your instructions.
@user-bz9qu7nd9l Жыл бұрын
I couldn't find the link to buy? No wait... Found it 😁
@lords-electrical Жыл бұрын
Just had a look and it is in the description of the video or here: amzn.to/2yRDhyK
@brianking75732 ай бұрын
Good lesson
@Enolu4 жыл бұрын
Thank you so much for this, I can't mine back on. I have a new part and it just won't click back in, however hard I try to push it. I'm not sure one of the sides is lying flush with the drum. The metal tab is in the right position - are you able to offer any advice, please? The last one came off because the clip bits sheared off, so it more or less just fell off. Your video is very clear, thank you, but mine just isn't going back on, even when I am pushing so that the whole machine is moving back! Thank you for anyone's ideas, thoughts or feedback
@lords-electrical4 жыл бұрын
I know it sounds silly but first of all is it the correct paddle for the machine, and if it is then i assume you are pushing it on the correct way round.
@vadymmelnyk6433 ай бұрын
Дякую за відео!
@richardjohnson34634 жыл бұрын
THANKS!
@bigshed514 жыл бұрын
Great👍👍
@GenCosmo5 жыл бұрын
Thanks! Very useful video.
@andreaharding4705 жыл бұрын
Thank you
@katiarenadzhafarova26898 ай бұрын
Thank you very much! It was do useful for me ❤❤❤.
@lords-electrical8 ай бұрын
No problem, glad it was helpful for you.
@nixonsmateruby1 Жыл бұрын
Cheers mate.
@NGHTNGLHS882 жыл бұрын
Paddles aren't broken they're rattling around on indesit xwde 750841 X. Is it case come loose from a groove?
@user-on1zq9dv7f Жыл бұрын
Hi so I have a problem - the paddle keeps coming out on one section of my washing machine after being installed because it can’t lie flat - the back section is lifted and it thus slides out. I think this is due to the shape of the drum becoming deformed but how would I even fix this problem
@lords-electrical Жыл бұрын
Sounds like it could be a manufacturing issue. I would contact the manufacturer to see if they can sort that for you.
@kafa15001Ай бұрын
Thanks a lot , it works 🎉
@lords-electricalАй бұрын
Great to know it was helpful, thanks for the feedback 😊
@kafa15001Ай бұрын
@@lords-electrical yep, even Miles away from you in Istanbul, it works ;) thx a lot.
@levaithan6669 ай бұрын
I found plastic shredded parts in my washing machine and I have no idea where it comes from, I tried cleaning the filter and in the small hole on to the left it's full of shredded plastic as well. Should I buy a new one or is it a easy fix? I have the feeling the pump or so might be clogged .
@lords-electrical9 ай бұрын
Hmm not too sure, it could be part of the pump that has broken and gone into the machine? Is it still pumping the water out ok and washing properly?
@levaithan6669 ай бұрын
@@lords-electrical no drainage of the water, and it looks like Christmas when the error pops up 😅
@amandamoran64713 жыл бұрын
I need to replace the paddles in my hotpoint but the metal tab has broken of from under 1 of the paddles can I still put a paddle on without the tab please
@lords-electrical3 жыл бұрын
Unfortunately it may not fit properly if the metal tab has broken
@brianfarry13 ай бұрын
Where do l get the plastic tabs@@lords-electrical
@zunimalik23175 жыл бұрын
Great help but where is link to buy those pedals
@lords-electrical5 жыл бұрын
It is here: amzn.to/2yRDhyK
@mihaiprofir7 Жыл бұрын
New direct injection have the metal lock at the back.
@1111freespirit2 жыл бұрын
What about if the little metal is broken is it oke do replace it anyway
@lords-electrical2 жыл бұрын
If the metal tab is broken in the drum, then the paddle may not stay in place.
@1111freespirit2 жыл бұрын
@@lords-electrical omg 😒 i Hope so that will works
@emilynichols7165 жыл бұрын
Hi, I have a hotpoint machine and the paddle has 10 holes, are you able to tell me where the tab is?
@user-yd2pt4lf9f4 жыл бұрын
ZerGut👍
@lords-electrical4 жыл бұрын
vielen Dank
@neon_gamer127coolguy42 жыл бұрын
Ur voice is sooo relaxing that it's forming ants in my body!
@filpip6762 Жыл бұрын
Has to be stiff to be good !! :)
@Kylo-kg4zq Жыл бұрын
Hi my tab has broken off on the drum
@lords-electrical Жыл бұрын
If it's broken off in the drum side there's not a lot you can do. If it's just the plastic drum lifters then you may need a new one
@ralu9457 Жыл бұрын
@@lords-electrical can it be secured with screws instead? could you make a video how if possible, please
@andyjudge51503 жыл бұрын
Nobody spotted that at about 2 minutes 20 seconds you refer to the drum securing tab - the one that needs bending - as being a plastic tab. It is of course a metal tab.