Replace a 12 hole paddle lifter on a Hotpoint or Indesit washing machine drum

Рет қаралды 87,171

9 жыл бұрын

I couldn't find instructions anywhere on how to do this so I made this method up myself. Please don't blame me if it doesn't work for you. This is the 12 hole paddle, be careful to order the right part!

Пікірлер: 37

@rootchiller Ай бұрын

Thanks sorted me out 9 years later lol.

@chjdecember 8 жыл бұрын

thank you, just what I needed, never done it before and couldn't work it out without this video, it worked beautifully.

@annemariexx3163 7 жыл бұрын

Step dad spending 3 hours trying to replace paddle. Was beginning to wonder if it would be done. Before the end of the day. Came on your site within 20 minutes both paddles replaced... thank you

@lex28lush10 5 жыл бұрын

ThankYou ever so much !... It took me about half an hour to fiddle with it until I search on youtube and found YOU !... then just couple of mins and it fits in like a charm ! .. happy day -)

@AdamHocking 5 жыл бұрын

It's crazy how many people this video helped. It's such a badly designed washing machine to replace paddles for. Be careful there isn't a coin or wire trapped behind the drum, that's the main reason I think that paddles break off over time.

@lex28lush10 5 жыл бұрын

@@AdamHocking .. ThankYou Adam for your kind reminder. ! .. what a chap you are. -) . Perhaps you could be someone who may design something exceptional without having to go through this ..

@sarahalexander6209 8 жыл бұрын

Thanks. Could not work out why our paddle was not just sliding in and staying there. Turns out the metal piece was sticking up so thanks once again, v helpful.

@kjg9987 8 жыл бұрын

Simple, straightforward and functional! Thank you

@chrisbennett9402 7 жыл бұрын

Life saver my friend - life saver

@PJBB-eo5kw 7 жыл бұрын

Thanks Dave Very helpful, Good Tip to drill hole in side of paddles.

@jasongage83 7 жыл бұрын

thanks for this saved me a call to the repair man 👍👍

@NADEEM8314 5 жыл бұрын

you sir are a genius.

@pinkashram 3 ай бұрын

Thank you!

@brianflaherty4066 3 жыл бұрын

good work, just what was needed

@rachyj9400 2 жыл бұрын

Genius, thank you for this.

@samdaley2569 Жыл бұрын

Awesome thank you. All the other videos I watched said push it down and it will come up on its own…..😮😮😅

@pjt.2829 6 жыл бұрын

Hi Back again 12mths ago same old thing paddle has gone, nice to see your video still running, hope yr well.

@AdamHocking 6 жыл бұрын

Hi. I find it crazy how many views this video has had. I've hopefully saved people thousands of pounds in repair costs. I'm glad to have helped.

@justingrocock162 8 жыл бұрын

Many thanks for this video.

@skaperverkstedet 8 жыл бұрын

Excellent, thanks.

@AndrewParkOutdoors 8 жыл бұрын

Thanks, thats saved a lot of grief !

@evacernohorska2049 10 ай бұрын

Super, děkuji 👍👍👍

@davehaynes1247 9 жыл бұрын

Useful tip, thanks.

@AdamHocking 9 жыл бұрын

Dave Haynes You're welcome, I think I went through about 4 replacement paddles over several months before I worked out this method. Since I made this video none of the new paddles have broken off.

@LizzieWhiz 8 жыл бұрын

Thanks I have to replace my paddles and my son was concerned about this piece of metal sticking up. It just seems to be on one section the other section where the paddle has come off does not have it or its not sticking up. I sound very technical don't I...lol!

@dantheblade24able 3 жыл бұрын

How do you do it for a samsumg eco bubble thanks in advance

@martinzwach4580 8 жыл бұрын

Top Hilfe.....!!!!!!!

@suny0716 4 жыл бұрын

what should i do if the metal catch ? locking tab thing is broken ? 0:08 please help...

@AdamHocking 4 жыл бұрын

Hi! Wow, that's difficult. Ok, i'm sure there can be a way of fixing it without throwing the whole machine away. I can think of 3 possible solutions. Thea easiest one would be to superglue some extra plastic onto the lifter that will then slot tightly into that hole where the broken tab has come from (maybe with a bit of encouragement from a small screwdriver). One would be to thread strong wire between the broken hole, the next hole (not a lifter attachment hole - the oval shaped one that seems to have no purpose) and through some holes on the lifter but finding a way to tighten it without leaving a sharp edge that could tear clothing could be tricky. Lastly you could try whittling your own adaptor from plastic or some other material that won't degrade in the wash, shaped to fit in those two holes but without protruding too much (or they'll catch on the outer drum during a spin) and with a little bit of spring to it so it can be pushed through the tab hole while the lifter is slid into place and then spring up to hold it afterwards.

@NA-ww6tn 5 жыл бұрын

Approaching 40k views on this.. Not to mention the ones who don't realise you can do it yourself, goes to show how many problems people are having with Hotpoints paddles. I've had mine 7months and already 2 of the three paddles have broken off, with the engineer breaking my 3rd and final one himself! As old as I risk sounding, I never had this problem with my 10+ yr old machine and I dearly wished I'd not left it behind when I moved! I wouldn't buy another Hotpoint and would be tempted to go for one with metal paddles again, or simply a better quality brand. Been told not to expect washing machines to last past 4 or 5 years tops now, which is pathetic given the cost of them.

@sandradavidson8265 3 жыл бұрын

Whys thrre not one for a hoover washing machine

@tuncay_akpinar46 6 ай бұрын

Hello friend, that metal piece is broken, what can I do?

@AdamHocking 6 ай бұрын

Difficult situation. Possibly something that will spring back down into the hole. Google "Roller Catch For Cupboard Doors & Locker Door Brown Caravan, Motorhome - E43/B", this could be screwed onto the inside of the paddle. You'd need to check to see if it would line up ok, it might not work at all. Good luck.

@tuncay_akpinar46 6 ай бұрын

@@AdamHocking I understand, my friend. Would a strong adhesive work?

@AdamHocking 6 ай бұрын

I don't know. Heat and washing aren't good with glue. You might just ruin your clothes. It could just be better to use some side snips to make a new bit of metal tab to raise up. The old part broke off?