We are here to learn about reattaching our small half circle window into our front door. The sealing of your window is the helpful info we needed. Thank you. -Lou , New subscriber.

Holy crap this is the first video I tried and not only do you tell me everything I want to know but the frame you're replacing is my exact same broken and discolored plastic white frame!! LOL! Thank you!!

I was actually able to get the kit which included a new window for about 140$. I had an estimate for a new door/side lite for 7k. That was crazy so I tackled this with the kit, a new paint job, replaced weather stripping, door sweep, hardware, knobs and kick plate. Came out incredible with total price being around 275$. Thank you!!!

I like your quick, to the point presentation. Accurate info without the show. Thanks!

I'm sure glad I found this video. I have a door like the one in the video and was able to remove the window and then remove the original adhesive/sealant that has long caused a problem by oozing a gooey mess onto to the door along the bottom edge of the outer window frame panel. After removing the gunk, I used some silicone caulk, as demonstrated in the video. I believe this saved me from buying a new door to solve a pesky problem. Your door also appeared to have the oozing adhesive/sealant; it appears as black matter along the right edge and bottom edge of the window frame; I noticed it 15 seconds in to the video.

I want to completely replace the window in my exterior door for one that I can open for better air flow. I watched the video to make sure I understand what I'll find when I take out the original window (exactly like the one in the vid). This tells me what I wanted to know. Thank you!!!😁

This is pretty good. Thanks for making these videos. DIY saves you the most money and I believe is the best way to go.

This video was exactly what I was looking for! Easy to understand. Thanks!

Perfectly explained! My framing has some minor cracks but the door is rusted so I’m painting it & didn’t want to have to mask every single window to spray it.

Got to say, video made in 2016, very nice quality production all around. And I love your F-Bomb meter at the start.

Thank you. I have a door like this which needs to be fixed before we move. It faced the other side of the garage door which when opened, the door would slam and eventually the frame broke and the window fell, but it did not break. Lucky me! Seems like a very easy fix. Now to try and find a frame which won't cost me a bundle. Thanks again for your simple explanation on doing this.

this is exactly what i needed! and it is easier than i thought. my frame just split but the glass it in tact. I just need to replace it. you explained everything precisely. I thought I needed to replace my door. Thank you so much

I got the information I was looking for. Thanks! In another installation video they said to remove the door, but I was thinking I would rather try without. This video fixed that bit of thinking :)

Thanks sooo much! The 15 lite glass broke in our door and The Glass Doctor wanted $389 to replace. 😱I found the glass with the plastic frames for $20 at Habitat for Humanity!! My husband and I watched your video and we took care of it.

Thanks, my entry door window is 6inch x 48 inches but this is the only video I have found to address the process of fixing this problem vs. having a professional do it for $40-$60 dollars an hour.

Very well-explained, and not so intimidated about doing this now.

Lol, this was exactly the video I needed and I love your style! Subscribed!

Finally I found a tutorial on how to do this. My windows are fine but the glue is running down the bottom of the door and is a mess. Now I'm not afraid to take the whole thing out and start over again. Thanks for posting!

Nice! Silicone on the window, painter's calk on the trim edge. got it. Thanks!

Great video. We tried to put frosted window tint on a door with a 15 lite frame without taking the door off the hinges. When we put the outer frame and glass back in, the glass slid down just enough to stop us from putting the inner frame on. I found your video and we took the door off, laid it on a 6ft. table, cleaned off all the old caulk and put a bead of clear silicone all around, put the door back on top and screwed the frame on and it came out great. Thanks!

Nice job Aaron!

Awesome I am going to try this!

I love the way to put these things together and is hilarious

Straight to the point, thanks dude

Thank you just the information I needed Great job!! Thx again

Thank you. It worked!,

Helpful information. thank you.

awesome, stumbled on your channel and just ordered these frames last week. my replacement frames come with new windows so should be easy enough. subscribed.

Thanks Man. Great DIY video

Nice work man!

Rarely do you find a video EXACTLY what problem you are working on, but even a blind squarely finds a nut every once in a while! Thanks for the video! Now to fixing the door.

Just what I needed thanks

Great humour! Love the video

I was going to replace my door instead of buying a new door grid frame. The bottom grid was broke out on both sides. One day walking through Menards wood trim section I found some trim that looked like the grid. With trimming the old door grid section I was able to fix it using 2 sided tape. It came out good.

Hey Mr. Fix it. Can you do a video about masonry and using brick (or cinder block) and mortar. Thanks.

Excellent video

Love it!

Great job

Thanks!!

Thank you!

very nice.

So Helpful!!!

Great video. Have two doors I need to remove glass on, clean up oozing caulk on plastic and then paint doors and plastic piece

This video was exactly what I needed. Was about to replace an exterior insulated door and instead i now have it looking great due to this video, and I'm not very handy. My door ended up being double pane and rattles a bit, I wonder if I should've put caulk on each side of the grille and then let each window sit and solidify to the grille for 4 hours or so before attaching it to the door. Maybe next time.

Thanks a bunch. You helped me find a replacement grill and really helped me with the door. Unfortunately, I was careless with the last screw and broken the 1/2 “ double-plate glass and had to replace it with plexiglass which was cheaper than glass. I am always an learning even at 74.

good job!

Can't wait for the carhartt stufffffff!

I recommend painting the plastic frame before installing it too. The plastic yellows & makes it look bad. Plus remove the door (as you discovered) and the door handle & deadbolt, refurbish the door ie new paint new seals. If you're going to do the job go all the way because this it the time to.

Thanks

Thank you!!!!!

The exterior side of my front door gets full afternoon sun and is a cracking gross mess, thanks for the info gunna try to fix it!

Thanks,great informative video...me ❤️

Awesome

Hi, instead of the window panes, can you convert the glass window to a window that can be opened?

OK you just made me like home improvement. Thanks

do you know what type of screws are used to fix the window ?

This is so helpful. My dog chewed pieces of the grille and I need to fix it.

Great video, is it possible to add hole in the glass to make ventilation? the heat in my garage is unbearable!

I have a patterned frosted window covering that i want to install under the grid. Will that work or will it be too thick to reattach the frame?

Our lab chewed the bottom section on the inside and my wife dribbled paint down inside the outside frame when she painted the exterior. About to have the inside replaced. Hopefully Lowe’s or hd can help

Had a door just like Mr.Fixit had. We originally were going to buy a new door, but then found door glass replacement. When I found this diy, we decided to simply buy the exterior side to the window frame as the window was in good shape. Mr.Fixit made it look easy.

Can I get a replacement without a grille?

This was perfect. I ended up getting the window/framing combination from Home Depot. I'm glad I did. The insulation around the window was much better than what I took out and it came with a bead of semi-sticky stuff around the edge for the outside, so I didn't need to use silicone caulking - although I put a thin layer on anyway.

Is there somewhere I can find the replacement screws? I have a few that were rusted and broken? I have checked all my local hardware stores, and big box places. Would you have any suggestions?

Hi what can I put over the glass for privacy renter friendly? It’s a metal door as well. I just taped line paper to it aha 😅 but it’s so ugly!

Is there anyway to just get the interior window frame part? The part with the screws? Ours cracked.

Loved your video. However I cannot remove plastic cap over screw. It is in there so tight. Help!

I pulled my cover off to install window film for glare and UV protection. I noticed there is nothing between the edge of the glass for any type of insulation. So it's basically two layers of thin plastic to keep the warm air in during the winter?? Is there anything a person can put in there to help?

We have a very similar door and are looking to replace it with a different style frame (one without the grids). Would it work to install a different style frame without replacing the glass?

Hi, very interesting vidéo and explained clearly. Would you know how to replace a Window frame of an outside door when tne frame has no screws inside or outside? Thanks un advance for the info or éventuellement better for a video tutorial.

I think the Pennsylvania frost/thaw cracked my frame. Anyone suggest a type of glue to glue the pieces back together? Or maybe where to buy a replacement frame? Have same door but top of window is arched.

Can you replace that glass?

I have a window in my back door but I was hoping to take the window out and change it for a window with blinds built in. Does that sound like something that is doable?

Dont use silicone. Use a door and window caulking, like dynaflex 230. Silicone is very difficult to remove completely from windows/glass

What about if I want to remove the grill but keep the frame/trim, so that I have just a smooth window with no grill?

My glass is fine, but the plástic frame broke. Where can I buy the plastic frame....tyia

Help! I have an exterior door with the small opening window, the screen needs replacing but I have no idea how to get to it, any help is appreciated. I looked everywhere for a diy video to no avail.

CAN I OVER TIGHTEN THE SCREWS AROUND THE PLASTIC FRAME ? Is snug good enough ?

The darn screw holes on my door are all filled with some type of hard glue instead of a cap. This was supposed to be an easy job haha. Thanks for the video!

Nice fix,my basement door window glass frame was recently damaged by a falling tree,so lucky that all the tree did,could have been much worse,since the rest of the door looks like shit any way,I'm calling it good since the glass didn't break,White Duck tape it'll look just like it did before...like crap.😅

How do you replace a broken glass if separate in squares,,?

A quick question. Home Depot in Canada does not carry these. Where can I find a cheap, plastic frame anywhere, even online? Can't seem to find them on the internet. Thanks if anyone can help.

I have a sliding glass window on my door and the frame of the window is broken. Where can I find a replacement assembly? I have gone all over the internet, Home Depot and Lowe's with no luck. Trying not to replace the entire door if I can avoid it.

This is _exactly_ the tutorial I needed to replace a frame that has some minor but unsightly cracks. Looking forward to dropping a couple F bombs, but it's better than dropping 10 F bombs over the cost of replacing the entire door. Thanks!

What about on old antique wood doors that i need the window panes taken out (total panes =24) no unscrewing ability, seems i need to break each pane but how do you suggest doing this safely, neatly and easily? Thanks

I have a door just like that but I want to change out the solid window with one that opens.

We took the inside frame off and the glass fell out onto the floor. Thank goodness it didn't break but now I have 2 pieces of glass. Oh nooo. What now?? I think the seal between the 2 pieces of glass broke. This thing weights a ton. Trying to figure out how to fix it. Any ideas? We will take the door off this weekend because it's getting late now.

I wasn't looking under 'thingy" but close as I thought the word was 'minions'... I didn't find mullions and now I will look under the correct word muntins. It's not like I use these words or need to find these things every day...So happy I found your video so I know... just take the door off the hinges...

I'm trying to take off the grill and would love to have my door without it....how do I do that? thanks

Brother you just saved me hundreds o fb dollars

Wow that looks great and you make it look easy! We were robbed and I’m kinda wanting to replace the glass with wood so they can’t break it. 😢

Where can I find the black thing that is in between both glasses. I ruined that part.

Would it be possible to remove the window and create a solid door instead?

literally found this by searching ' window door thingy '

I really thought you were going to get a new frame without the grid. Do they sell those ?

My backdoor looks exactly like this however previous owners covered the screws with something that I can't remove. How do I get the frame off without damaging the glass?

Why can’t i buy this in europe, netherlands!?

I love and hate these mullions, I like them because they look nice and I can hang small wreaths on the for holidays. I hate them because they're difficult to clean and the issue you fixed in your video. And that they yellow over time.. Thanks for the how to.

Has anyone seen Dako doors and windows? I bought them a few weeks ago, and I would recommend them to anyone looking for good design and quality.

Would have been a good opportunity to sand and paint the door since it will clash against the pristine new white frame. Wouldn't it have been relatively easy to make those frames from wood instead of using plastic?