You can replace without removing parts to the bumper and fender panels. Just remove the parts under the hood behind the headlight. Takes about 30mins

This video made me realize how difficult replacing the bulb on my Escalade really is 🥺 yup…looks like I’ll be paying someone to do it for me.

Great video...was thinking about doing this myself just to feel mechanical and you just made me 100 percent sure i won't definately going to pay to have it done lol

Successful end product👍 Couple tips for next time... Since you already had the grille unbolted and the wheel wells disconnected, all that was left was one 10mm bolt each side of lower bumper. Then pop out turn signal/fog lights while you're there. Whole front end comes off and leaves you with acres of space and no worries of scratching the vehicle (and yourselves). This also keeps you from having to mess with the auxillary battery tray, therefore less bolts to mess with overall.

Thanks for this video. For others attempting this, that bolt that is hard to get to at the bottom, you do NOT need to remove that completely. The mount on the headlamp assembly is split, not a closed loop, so you can just loosen it and slide it off. Save yourself some headaches and leave it on.

Thank you, I literally watched three or four other videos and they weren't as easy and specific to follow like yours wasted two hours because of those other videos then saw yours and did it in fifteen minutes

Removing the 2 side bumper bolts makes it much easier to reach the bottom bolt, plus the headlamp assembly comes right out without a scratch. Armature solo replace took 1hr =)

Thanks, did it myself, cracked the hidden bolt plastic part on the light. Super glued it, let sit and dry, put it back together and was solid🤗for now🤔

Great informational vid. I am in no way a mechanic but this and a couple of others saved me about $300+. Thank you!

I commend you guys on your project, I wanted to change out mine but I've decided just to sell my Escalade as I can get more than I paid for it right now and I'll just save myself the grief

Crazy that they design these vehicles to prevent basic repairs. I have one light out and have to pay jist to replace the bulb

Thanks. Other videos woul dhave you remove whole bumper. Great how to and time saver video. Awesome job.

What a pain in the ass to change a bulb! Shame on u Cadillac! Lol

Thanks guys i already dred doing this but you guys make it easier

Great videos helped me out quite a bit today

Dude I pulled the first 2 bolts, hit up KZfaq to see what was holding it. Wow great video guys. Thanks for saving my afternoon. I will regroup and plan an attack. Seems best to both while I’m in there.

What color temperature are those? Do you have the link for the bulbs?

This looks like a pian

I need help my right headlight is off alignment I would like to know where’s the bolt for calibration

Great video even better jersey! Hajmo bosno

Good video man. Where do you get this replacement bulb?

All that hassle and you didn't change the dull yellow daytime running lights 🤦‍♂️ good video though.

1:35 does anybody even know why that plate is there ⁉️it looks like a battery plate for the battery to sit on but the Battery is on the complete opposite side of the car 🤷🏼‍♂️

What site did you find the bulbs

Does the middle light ever turn on? No right?

Jeezuz, all that just to change a lightbulb? I never had to do all that with any of my other vehicles. It was a simple replacement

Looks like $200 well spent.

What kind of bulbs did you use?

This is ridiculous. GM, you're FIRED!

Isn’t that about the most ridiculous thing you’ve ever seen in your life? You have to jump through those many hoops just to change a headlight. That’s insane. In my Chevy Tahoe there’s 2 long L pins on each side. You pull those pins and the whole lens will come out with little to no effort. No tools involved

You don't have to remove all of that stuff to get to the headlights. I remove nothing but the rubber cover that go over the housing of the lights. I can change all three bulbs in less then 5 minutes. All of this is unnecessary and time consuming.

Gussssh. Now I understand what the hatters of this car are talking about. Mine has same exact (Painful) driver side burned out and now I am thinking to change it at all or tolerate! WHY can't these idiots make its as simple, efficient and easy as Denali Yukon, where I only have to turn two long rods, 45 degree counter clock and remove the entire light assembly away from the car, without touch anything else or even screwing or using a tool!!!!!!!!!!!!!!!!!!!!!! GM go get more wisdom and have a visit to Emerald city, to check with Dr. No Mr. No The Wizard of OZ!

White power sign to match the color of the car?

R u mecánico o joker? Good video wrong partner

Why dont you just take the wheel off. Its easier

Nice vids. Goofs 🤪

Sexy edits ;)

Please keep that WP ish to yourself. Not cool.

Guys not the greatest of video

Escalade are too much maintenance