I've done several of these. Trick of the trade about these cars is you didn't have to unbolt the subframe. The way I've always done this was unbolt the transmission and you can literally slide it back to rest on the subframe and have enough room to remove the clutch. Saves you from having to drop it, it slide right back into place when done. I've done a few RSX clutch swaps and 8th Gen k24 Accords. Makes the job so much easier. I didn't even have to remove my starter, just unbolted it

Dsm and rsx owner here .. I appreciate the rsx content too! Your knock sensor video on the rsx helped me 🙌🏻

Very nice I’m in the process of this right now. You removed the subframe the hard way. It’s so much easier to leave the brakes and front lower control arms attached to the knuckle and only drop the subframe and sway bar. Also the transmission only takes 1.6 quarts if you’re just changing fluid and 1.8 quarts for a complete overhaul. I cringed when you didn’t resurface the flywheel 😂 and when homie was tapping in the rear main seal in with a punch. Love the RSX do more videos

Fun bits of track day footage as well. Pretty sure this will help a lot of people to get the confidence to do it themselves.

Love the content, keep up the good work!

Awesome new clutch. Good video

Excelente contenido, siempre me inspira...

Buen video💪🏻

Just want to say that i love your content. And as a dsm owner i learned so much from your video’s! Keep on going mate!!

Always try to stick with oem throw out bearings! I’m interested to see how well this one holds up.

I'm having my clutch replaced now, and this video makes me appreciate where my money's going ($1600). 156k miles on my '03 RSX-S and I believe it's the first clutch, I don't drive track or anything though.

Nice work man! I just got a 2001 camaro z28ss that I am beginning to pull the trans to rebuild it and put in a new clutch, i hope mine turns out as good as yours did!

Wanna see another DSM video what’s up with the fuel leak. Is it fixed.

Shoulda went with exedy race clutch...world of a difference.

you should put your sunroof down. Would help with your Aerodynamics, especially on a track.

That exedy throwout bearing is trash Ran it on my k24 8th gen civic And it started making noise less than 6months Always go OEM throwout bearing

That acura is DUMPING oil out of the exhaust lmao. Valve guide seals are probably roasted..could have bad oil rings or head gasket leak as well..wow. I wouldn't overlook that.