How to Replace Condenser Tumble Dryer Belt Bosch Hotpoint Zanussi Germany

Рет қаралды 14,592

3 жыл бұрын

How to Replace Condenser Tumble Dryer Belt Bosch Hotpoint Zanussi
Belt replacement on a Bosch condenser tumble dryer, Germany Dutch
Hi I'm Luis
I'm a person of many jobs I do fell I can help others with my knowledge, and my videos I'm not a expert on KZfaq as you know, for this videos' to have a amazing quality for you guys to enjoy it 100% and understand it needs good tools like recording cameras etc.
I don't have the funds for it ends why I'm asking you to help me so I can help others to achieve watt thy need from the comfort of their houses I will found out the way to benefice you to .
also like my videos and Subscribe .
thanks
Fallow / wmrservices
DONT CLICK ON THIS!! / @appliancesrepais
Become a Patron:
www.patreon.com/tugaproject?f...
Support the channel :
/ @appliancesrepais

Пікірлер: 40

@neilcarroll4579 10 ай бұрын

Great , worked thanks , a lot of people online have totally stripped it down , pointless .

@MylanoFrames Жыл бұрын

thank you! you saved my dryer

@appliancesrepais Жыл бұрын

I’m please to know that

@suehill9679 2 жыл бұрын

Thank you very much for this - it was tricky, and took some time, but thanks to your video, I succeeded in replacing the belt, and I'm a 61-year-Old woman! My dryer is all working fine now!

@appliancesrepais 2 жыл бұрын

You welcome thanks

@steveneedham8797 2 жыл бұрын

Great video-I would never have attempted this job without it. Thanks for posting!

@teejohansson387 3 жыл бұрын

Thanks for sharing! This made it possible for me to do it myself.

@appliancesrepais 3 жыл бұрын

Thanks 🙏 and we’ll done ✅

@kingfisherdecor5533 2 жыл бұрын

Thank you for making this video, it was very helpful.

@appliancesrepais 2 жыл бұрын

Thanks

@rickineo3367 2 жыл бұрын

At 6.38 there is a screw in the fan cover which is conveniently skipped, up until that point it's not impossible but once it comes to wrapping the belt around the fan pivot you'd need to take out the drum to release the screw to the fan cover... Bit misleading

@appliancesrepais 2 жыл бұрын

Hi Ricki To remove that screw you do have to remove the drum yes . Other way like I have done this screw is snapped doesn’t really need to be back on. I hope this will help you. Thanks

@timosteernberg3640 2 жыл бұрын

I am currently in this position, please next time dont skip it.

@steveneedham8797 2 жыл бұрын

This screw is completely unnecessary because there are at at least five clips holding the fan cover in place. When I got this far, it was impossible for me to get any of my Torx screwdrivers to turn the screw because of the drum being in the way, but if you have a set of Torx bits and the drill/screwdriver adaptor then you might get lucky and find that the screw is only finger tight as I did. Otherwise it would have meant taking the drum out. Bad design by Bosch :-(

@stevencawley6870 2 жыл бұрын

This was a big help, thanks.

@appliancesrepais 2 жыл бұрын

Thanks

@clivewillis5445 Жыл бұрын

Very helpful. I found I had to use a torx bit on a ratchet to get the screw out of the fan cover as there's not enough room to get a screwdriver in the gap.

@appliancesrepais Жыл бұрын

That’s right thanks

@fredy417 3 жыл бұрын

Good job I’m a appliance engineer myself they’re one of the most difficult belts to fit.You remembered to take off fan cover just make life a little bit easier.👍

@appliancesrepais 3 жыл бұрын

Hi Richard Thanks

@simonkaye6974 3 жыл бұрын

Hi guys. I am literally at the point of taking a cover off the fan but cannot get it off at all apart from the front piece. In this video you’ve cut when you were having a problem doing the same and then went back on when you had released it. Can you tell me how to get it off please?

@appliancesrepais 3 жыл бұрын

@@simonkaye6974 hi Tó take the fun cover off you will need a screwdriver 🪛 flat and forced it to open

@simonkaye6974 3 жыл бұрын

@@appliancesrepais I tried that but the back bit started cracking. One side of the back bit has a release lever underneath but the other side seams fixed

@simonkaye6974 3 жыл бұрын

Can I WhatsApp you a picture?

@garethrees100 2 жыл бұрын

Looks a bit of an arm wrestle ! But thanks for this I’ll give it a go in the next day or two. I’ve already taken the fan cover off. Had the wife to help with the back three clips as my hand was too big. Then the front four clips next and it came of all right. Bit of a squeeze.

@appliancesrepais 2 жыл бұрын

Hopefully you will get it done ✅

@MattyEngland 2 жыл бұрын

Far easier to do this job from the rear and remove the drum. It takes more time, and you have more stuff to remove, but that way you don't have to force things and break the clips on the fan cover.

@LawrenceRhodes 3 жыл бұрын

wte 86300us/8 I have this United States model very similar. However it was not as easy. The drum doesn't separate as far as your model. I had to thread the belt into the bottom of the drum guide and rock back and forth slowly allowing the belt to exit the drum guide. This flips over the belt so twisting and aligning is needed. My model has 8 splines on the belt and a cantilevered dual belt so I don't have to take off the fan.

@appliancesrepais 3 жыл бұрын

Hi Lawrence Yes some models are a bit diferente then the others but if you manage to do yours that’s the achievement. Thanks 🙏

@johnsturge4178 2 жыл бұрын

Some bits have been jumped. Removing the fan cover is impossible either remove the drum or break the clips and single screw holding fan cover in place. This is a poor design and I feel designed to be difficult for the diy or allow there engineers to charge more. Level of dismantling is madness

@appliancesrepais 2 жыл бұрын

I completely agree John

@MattyEngland 2 жыл бұрын

It's a lot easier to do this job going in through the back and removing the drum. It takes longer and there are more things to remove, but far far less chance of breaking things.