How To Replace Crankshaft Position Sensor 97-99 Ford F150

No video

How To Replace Crankshaft Position Sensor 97-99 Ford F150

Рет қаралды 270,863

1A Auto: Repair Tips & Secrets Only Mechanics Know

Күн бұрын

Пікірлер: 74

@1AAuto 4 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@johnpruitt2395 5 жыл бұрын

Thanks for the great video. Figured out my problem with some other videos but could not have changed the crank sensor without this video! Worked like a charm and now the truck starts right up. Hardest part is the AC compressor and that wasn't too bad. Did need another person to hold it out of the way in order to get the sensor re-installed. A little over $30 for the part, tax included. Thanks again.

@1AAuto 5 жыл бұрын

+John Pruitt Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

@davidgelista4959 2 жыл бұрын

This guy knows wat he's doing and explains very well and clear (No other video explained about the back nut on compressor holding refrigerant line pressure)...

@Ford_Raptor_R_720hp_V8 6 жыл бұрын

Thanks. A faulty Crankshaft Positioning Sensor is one of the most common No-Start conditions. I have a 97 4.6L

@lamontgray1158 4 жыл бұрын

I did too lover that engine and truck life happens and I lost but I hope I can get another r 150 one day

@Topofthefoodchain 5 жыл бұрын

Thanks for the video it really helped. I have a 2004 and it was 3 bolts that were 13mm, and I needed a deep socket.

@JB-bi8xb 2 жыл бұрын

Good video but you really should tell people what motor it is. The 97 had a 4.2 and a 4.6

@cristianbalboa7 2 жыл бұрын

Is this the same location for a 2011 ford f150 3.7 V6 crankshaft position sensor?

@1AAuto 2 жыл бұрын

+Sevens Balboa We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@hatteraslabuf 6 жыл бұрын

What are the symptoms of a bad crankshaft position sensor?

@adamgermanigermani5990 5 жыл бұрын

Engine is in limp mode diagnostic comes back no fault but ford transit 2.2 13plate still in limp mode

@OscarGarcia-tf6jg 4 жыл бұрын

What coolant leak out or would that be an odd leak I only ask because I have a leak but it doesn’t seem to be coming from my water pump

@XpRtEclipzz 4 жыл бұрын

@@OscarGarcia-tf6jg maybe it's the intake manifold leaking coolant into the spark plugs

@tiffanystivers280 3 жыл бұрын

Hey crew any chance you have a video for the same part but on a 2009 Ford f150? I can't find a video anywhere on the internet.

@oscarsanchez9336 Жыл бұрын

Hi for the 2009 ford f150 stx is the same location for the sensor

@ZZZRSC 2 жыл бұрын

1998 E250 5.4L van engine Has been running fine. Twice in the last 3 weeks, when I went to start it, the engine fired up on the first crank, but within a second it kicked back and did not continue to run. I tried to crank it over 3 more times but the engine didn't move like it was hydraulically locked up. Waited 20 minutes and it started and ran fine. Would this sensor do that or something else?

@theenihilist1128 5 жыл бұрын

Thank you for the video!

@1AAuto 5 жыл бұрын

+Thee Nihilist Thanks for watching. If any of our viewers needs to make this repair, we carry the auto repair part shown in this video on our website. Here is a link to them www.1aauto.com/crankshaft-position-sensor/i/1aecs00006?KZfaq&CTA+Comment&TZw1CDyw_KQ

@normstephens8354 4 жыл бұрын

2-wheel drive is much more difficult to do. Very little space to get a wrench in to work on it.

@CSDJK 6 жыл бұрын

Looks like you removed the radiator and fan cover to get to it?

@Lemming32 3 жыл бұрын

I have a 1996 7.5 l 460 motor with a California cam sensor. Put a new timing cover on and it doesn't have the bosses to connect the cam sensor is there any way I can use a different sensor on the single boss mount on the timing cover?

@roboink 4 жыл бұрын

I have a 2006 F-150 5.4 2wd. Changed out the Camshaft positioning sensors and still runs rough. Would the next thing be to change out the Crankshaft sensor? I had advance put the scanner on it when it started running rough and fault said camshaft or crankshaft sensor. So went with the easiest one first.

@mikeb9178 2 жыл бұрын

It should be noted this is not a 4.2l

@turo669 5 жыл бұрын

Took me 45 min to replace. I didn't have a swivel so i used an open end wrench on the 3rd bolt. Wasn't bad at all. Didn't get sockets stuck😂😂

@trubz360 5 жыл бұрын

I have a 97 f350 5.8L efi would it similar? I can seem to locate it. I was told it could be in the distributior cap.

@wtfareyoulookingat2797 6 жыл бұрын

Is that the same process on a 4.2 six cylinder with AC ?

@1AAuto 6 жыл бұрын

+swamp man It may be a different procedure on that application. Thanks for watching. 1aauto.com

@chuiisenseii5885 Жыл бұрын

Do the 1994 f150 5.0 have a crank shaft sensor?

@brycebirt6849 Жыл бұрын

Is this for the 4.6 or 4.2

@davidbarthel9976 4 жыл бұрын

Thanks for the info. Initially I thought it could be done by just removing the belt.

@1AAuto 4 жыл бұрын

+David Barthel Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@user-rw1bn4oq7b 7 ай бұрын

Crank sensa position for Ford f150 2015

@sabrinacleveland3933 4 жыл бұрын

When turning the key to start shouldn't the rpms move if not would that be a bad crank sensor

@tarawhite1644 2 жыл бұрын

I have a 1997 ford f150 5.4 v8 can u help me my won't start

@reneruiz7719 Жыл бұрын

How to take off clip?

@jessicaboedicker5569 6 жыл бұрын

Would this also apply to 97 Ford Expedition 5.4L?

@1AAuto 6 жыл бұрын

+Jessica Boedicker It should be the same or a similar procedure. Here is a link to the crankshaft position sensors that we carry for your vehicle. Hope this helps you out. goo.gl/bXJVDU

@cristianalvarez2383 4 жыл бұрын

Does any body know what to do if it feels like the sensor is hitting something

@freedomfightercorpuschrist4355 4 жыл бұрын

How do you know something was wrong with the Crank shaft sensor Did the check engine light come on because I have a 2007 expedition 5.4 L and it hesitates on celebration when we’re driving

@1AAuto 4 жыл бұрын

+CopWatch Corpus Christi TX Police Accountability This video was done for instructional purposes. If the part is faulty the check engine light would be illuminated, however, we wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com

@johnjohn.p.fassett5639 3 жыл бұрын

Where is the crankshaft position sensor on a 2012 F350 6.2l gas?

@lagarymoy7294 5 жыл бұрын

My car stalls but it’s not showing no codes and it runs good when its in park but when i drive around the corner it stalls out

@jdepew69 4 жыл бұрын

Did you ever figure yours out? Mine is doing the exact same thing. Thanks

@izcoronel 6 жыл бұрын

ford lariat f150 5.4l crank no start/ t-shoot the ff: spark okay,pulse okay,relays and fuses okay but no fuel pressure. tried starting fluid ran for a bit and died. my conclusion i have to change my fuel pump buti also need to ask your expertise to be 100 percent sure.thank you your response very much appreciated

@1AAuto 6 жыл бұрын

+izcoronel We could never be 100 percent sure without actually seeing the vehicle! If you are unsure we would always recommend having a trusted mechanic try to diagnose your issue. www.1aauto.com

@Memphisgrindtv 5 жыл бұрын

It’s your pump mines did the same

@GiorgosC-rp5ms 5 жыл бұрын

what if i bought one with the sensor missing,i bought a e150 van with 4.2 litre because they couldnt fix it and sold it to me but its removed already,i have to start from scratch.

@1AAuto 5 жыл бұрын

+g c Thank you!

@karanicholas9868 Күн бұрын

Bro has the truck lifted and still I can't see any of those bolts wtf dude

@youtoobe169 5 жыл бұрын

Great video, thanks!

@1AAuto 5 жыл бұрын

You're welcome! Thank you for the feedback. +youtoobe169

@youtoobe169 5 жыл бұрын

@@1AAuto So, I just finished this job, but for the life of me could not get the connector to "snap" onto the new part. I actually thought I had a slightly wrong part and got a different one from a local auto parts store and visually compared them, and same thing. I tried squeezing the clip and everything. I ended up just using the flat part of a ratchet and firmly pushed it into place. Not sure if it snapped in or not, but the car runs fine now. The old part had a black film over the metal part of the sensor.

@1AAuto 5 жыл бұрын

+youtoobe169 Thanks for the update! We are glad to hear you got the new part installed. As long as you secured it down with the bolt, there shouldn't be any issues with the replacement part.

@nicholasmedina6660 4 жыл бұрын

I have a 97 f-150 mine cranks no start has fuel and spark but it won’t start and no codes pop up

@1AAuto 4 жыл бұрын

+Nicholas Medina We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com

@davidbarthel9976 4 жыл бұрын

Where is the camshaft position sensor located on the same vehicle?

@Joseph-wu7vm 2 жыл бұрын

on the front side of either head, 2 cam sensors

@andremunoz9206 4 жыл бұрын

Why is my ac compresor on the driver side

@hawk6282 6 жыл бұрын

You only showed removal of two bolts and a sensor not the 3rd up high bolt...did your ratchet reach that easily

@spacexcadetpanda7499 6 жыл бұрын

* HAWK he just rotated it away just enough to get to the sensor.

@MaDgAmersENT 4 жыл бұрын

Anyone have a issue with a code p0315 with their f150 ? That’s why I’m watching this video

@garyeberth9333 6 жыл бұрын

Where is the crank positioning sensor on a F250 2012 6.7 L engine

@1AAuto 6 жыл бұрын

+Gary Eberth We currently do not have an auto repair video that covers this particular repair. We will keep this request in mind in the event that we need to make this repair in the future. 1aauto.com

@nabielsuleiman7039 4 жыл бұрын

easily done when it's on a lift

@sketchistate 4 жыл бұрын

Yea super easy when your ford is lifted and on a lift! Lol

@1AAuto 4 жыл бұрын

+sketchistate Thanks for checking us out! 1AAuto.com

@davidbarthel9976 4 жыл бұрын

Why would it go bad? It is just a magnet.

@1AAuto 4 жыл бұрын

+David Barthel Symptoms of a Bad or Failing Crankshaft Position Sensor Issues Starting the Vehicle. Intermittent Stalling. Check Engine Light Comes On. Uneven Acceleration. Engine Misfires or Vibrates. Rough Idle and/or Vibrating Engine. Reduced Gas Mileage.