How to Replace CV Axle Assembly 2007-2012 Nissan Altima

No video

How to Replace CV Axle Assembly 2007-2012 Nissan Altima

Рет қаралды 24,760

Күн бұрын

Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/ic/1AAC...
This video shows you how to install a new CV axle assembly in your 2007-2012 Nissan Altima. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This process should be similar on the following vehicles:
2007 Nissan Altima
2008 Nissan Altima
2009 Nissan Altima
2010 Nissan Altima
2011 Nissan Altima
2012 Nissan Altima
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obmX/1A...
• Pry Bar 1aau.to/oUZ/1AX...
• 21mm wrench
• 21mm Deep Socket 1aau.to/oai9/1A...
• 32mm Socket 1aau.to/ocT/1AA...
• Channel-Lock Pliers 1aau.to/ok4/1AX...
• Wire Cutters
• Ratchet 1aau.to/obDJ/1A...
• Torque Wrench 1aau.to/oaHz/1A...
• Gloves 1aau.to/oacB/1A...
• Safety Glasses 1aau.to/o5H/1AX...
• Transmission Fluid
• Hammer 1aau.to/oUW/1AX...
• Pick 1aau.to/oQG/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 16

@TRQ Жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@BlackWhite-ru8gm 11 ай бұрын

You made that look so easy

@mark18mhcc 9 ай бұрын

Do you need to top off the transmission fluid after all of this?

@JuanHernandez-ld4ki 8 ай бұрын

Is the axel supposed to jiggle a little bit or is it lock into place?

@JoseTMunoz 19 күн бұрын

Nice video bro thanks foor you help

@3rbabyjok 5 ай бұрын

Does this apply to the v6 sedan?

@jameskells1844 6 ай бұрын

Awesome display 👍

@antoniovallejo9227 6 ай бұрын

En mi caso mi altima es 2008 std como le haría para el nivel de aceite o cambio de CV joints

@publicmail2 9 ай бұрын

Is alignment required, caster is only effected and spray paint bolt location. I doubt it would change or get a free check at shop.

@TRQ 9 ай бұрын

+AD Electronic Teardowns An alignment is recommended after replacing any steering and suspension components.

@maxamillion4223 8 ай бұрын

Very good video

@rauljosuenajeralongoria1115 7 ай бұрын

Look at that disk brake… 😮…

@OfficialEliMarie 11 ай бұрын

what is the bar called that you are using for the lbs.

@TRQ 11 ай бұрын

+Official Eli Marie 😈 Torque Wrench

@agimqerimi2564 11 ай бұрын

Is a same procedure with a 2016 Altima yes no

@TRQ 11 ай бұрын

+Agim qerimi This procedure might be different for your application. We do not currently have a how-to video for this particular year, make and model. Thank you for asking! 1aau.to/m/Shop-TRQ