Yeah front seal should be changed and mine. has. Oil cooler lines other than not changing seal and he could have said some had oil. lines He done a. Excellent job
@curtisholloway3516 сағат бұрын
Thank you so much for your help.
@ronnietoups62226 сағат бұрын
If it didn’t have blinkers before it still lights up?
@bjornmclir50156 сағат бұрын
Great video i just finished doing this procedure for the first time and it was a huge help, found that the original plenum gasket had broken and popped out. I was burning a gallon or so a week of oil, kinda made it look like i had a diesel rolling coal but definitly not good.
@MattPaulson6 сағат бұрын
Super helpful. Made it very easy. Thanks!
@jamesdombroski6 сағат бұрын
That's not the same headlight or bolts as my 2005
@Pashtet19916 сағат бұрын
Can you do a video on replacing the front bumper located on the back of the truck ?
@kotaaa97886 сағат бұрын
94-97 s10
@jeffd52887 сағат бұрын
Can't say I've ever seen better videos. This guy is top shelf, Thanks!
@oldz707 сағат бұрын
Nice rusty shit.
@TerryTerry10237 сағат бұрын
After watching this video, I am confident that I better get somebody else to do it.
@kengallatin31827 сағат бұрын
Best Impala cabin filter change-out video. Most complete, quickest, easiest to see right fitting. Thx!
@drjd2real8 сағат бұрын
Didn't help because I need to swap the lock?
@Zetharion18 сағат бұрын
Thank you for this very helpful step by step video! You even included socket sizes and torque specs. I have been putting this off for a month because I am at the age that I no longer have any desire to work on my own stuff anymore but couldn't bring myself to pay twice what I did to have it done. Took two and a half hours of back and for forth and searching for equipment to do the one side and like 15 minutes to do the other lol.
@reginaldgreen62218 сағат бұрын
Never seen this much work in changing tail lights
@tc74588 сағат бұрын
Check the end of the ball joint threads3 for a 5mm hex instead of using vice grips. Great tutorial!
@japamala9348 сағат бұрын
My WJ and I ❤ u sirrrr!
@jeremiahgolden18899 сағат бұрын
No torque specs?
@jeremiahgolden18899 сағат бұрын
For pitman arm I mean
@apollothe1a1929 сағат бұрын
My old lady got the bumper off faster than you… after she hit a mountain of a snow pile lol
@jdmforever55839 сағат бұрын
Wow you make 258 ft lbs look really easy😅
@ebonynelly58659 сағат бұрын
Hey could you tell me what side of the vehicle this is located on I have a 2006 ford focus zx4 model 2.0 and I can’t seem to find it
@lukyanrosselli9 сағат бұрын
Thanks ❤
@Woofis699 сағат бұрын
I have searched quite a few videos and no one seems to have my problem. I have everything undone and the bumper clips are no longer holding on. However the clips on the frame that are attached to the grill part of my bumper will not let go what so ever. Everyone else has ease of removal except me. Tips?
@larissakirby18219 сағат бұрын
Ok, so when you removed the seal, there was a thin metal piece, on top of the bearings, you didn’t show it when you cleaned the top of the ridge. Then it was there again at the install. (Time stamp 8:09 and 8:26) What is it? Is it part of the bearings because it’s not part of a new bearing from my parts store, nor was it part of the new seal. I’m asking because it’s basically 4 pieces and I lost one and I’m not sure what to do about it. It had broken and caused damage to the seal, and was grinding down inside. I don’t want it in there if it’s not required and want to replace it, if it is.
@michaelgreen32249 сағат бұрын
What’s the actual time it took to do this. Anyone whose done it.
@vickiwade4289 сағат бұрын
This is such a fantastic video. You can see what the mechanic is doing and he warns you on all the little details that make the assembly work. Thank you!
@coreyheyman10 сағат бұрын
I think you forgot to do a quick inspection In all seriousness, great video
@bparth189610 сағат бұрын
Thanks for the video! Will you need to add and/or bleed coolant after doing this?
@thanhnguyen490810 сағат бұрын
why u replaced ONLY one when u have change can replace both solenoids as same times saved a big labor & headache later for u or customer don't cost to much labor again to do the jobs twice when u there??? for me i alway take care for customer if i know one of these those solenoids can go back again and again, i alway using Ford products latest made or best Japan made Denso or Bosch high quality brands
@mtbknox10 сағат бұрын
Thank you very much for this video! Very very helpful. Took us 20 minutes to change out both. Appreciate you!
@wakawaka197610 сағат бұрын
Nice
@melvincooper892610 сағат бұрын
Straight forward and to the point. Great video.
@brooketegge383810 сағат бұрын
You did not touch any adjustable steering components so why re align?
@TRQ10 сағат бұрын
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
@edwardh100310 сағат бұрын
Does the vehicle need a front end alignment after installing the new shocks?
@TRQ10 сағат бұрын
+@edwardh1003 Yes, an alignment would be necessary after this installation.
@ermuunbatchuluun10 сағат бұрын
Super good video
@wakawaka197610 сағат бұрын
Good stuff thanks
@TRQ10 сағат бұрын
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
@WALEED19790810 сағат бұрын
nice video, but why not to simply fix it by replacing the little 2 plastic peices inside?
@ivanvaldovinoscuervo708710 сағат бұрын
Good job
@alsammak7110 сағат бұрын
thanks 👍
@jc993011 сағат бұрын
I cannot believe with all that rust that everything came apart that easily. You are very calm. Its like watching bob ross fixing vehicles. Thank you!!
@TRQ10 сағат бұрын
+@jc9930 Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-TRQ
@JanesKhan-tk3si11 сағат бұрын
Great
@lisalashawnbraxton39611 сағат бұрын
Can I pay you to do mine
@jedmccullough780911 сағат бұрын
Why did you hide the pulley one of the most important things. Smh some peoples kids, not to mention you don't have to take off anything other than the balancer
@TRQ11 сағат бұрын
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
@ThomasFreundl11 сағат бұрын
I didn't see you install the wear indicator on the pads - is there any particular reason you didn't, or did I not see it?
@martz0r12 сағат бұрын
I wouldn’t advise using the caliper piston as a backstop for your pry bar.