No video
How to Replace Exhaust Manifold Catalytic Converter Assembly 2000-2007 Ford Focus
Рет қаралды 4,227
Күн бұрынShop for New Auto Parts at 1AAuto.com 1aau.to/c/93/bp...
This video shows you how to install a new TRQ direct-fit bolt up catalytic converter assembly on your 2000-2007 Ford Focus. This vehicle uses an integrated exhaust manifold and catalytic converter assembly. That means you can replace the manifold, or the catalyst, without needing any cutting or welding.
This repair was done on a 2006 Ford Focus ZX4 2.0L Sedan 4-Door FWD Automatic and the process should be similar on the following vehicles:
2000 Ford Focus
2001 Ford Focus
2002 Ford Focus
2003 Ford Focus
2004 Ford Focus
2005 Ford Focus
2006 Ford Focus
2007 Ford Focus
Tools you will need:
• 13mm Wrench 1aau.to/oaa4/1A...
• 10mm Socket 1aau.to/obDG/1A...
• 13mm Socket 1aau.to/ob3p/1A...
• 15mm Socket 1aau.to/ob3p/1A...
• 22mm Socket 1aau.to/orL/1AX...
• 7mm Socket 1aau.to/obDG/1A...
• 8mm Socket 1aau.to/obDG/1A...
• Trim Tool Set 1aau.to/oauD/1A...
• Needle nose pliers 1aau.to/oIz/1AX...
• Needle nose pliers 1aau.to/oIz/1AX...
• Pliers
• E8 Inverted Torx Socket
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet 1aau.to/obDG/1A...
• 3/8 Inch Drive Ratchet 1aau.to/ob3p/1A...
• Torque Wrench 1aau.to/oa74/1A...
• Gloves 1aau.to/oaW3/1A...
• Safety Glasses
• Floor Jack 1aau.to/oauz/1A...
• Jack Stands 1aau.to/oagC/1A...
• Razor Blade / Gasket Scraper
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Ford Focus 1st Generation 2000-2007: • Ford Focus 1st Generat...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
@TRQ 5 ай бұрын
√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money
@erinburke9711 4 ай бұрын
The cat you sell is skinnier than OEM so the round bracket won't clamp tight around it. There's a 3/8" gap all around. How do you solve this?
@AceAuraDesign 2 ай бұрын
I’m also wounding about the clamp. I couldn’t connect the clamp or the heat shield due to the after market alterations.. I had to heat wrap the exhaust in the mean time
Canadian Wrench
Рет қаралды 1,7 М.
Rust Bros (Official)
Рет қаралды 3 М.