How to Replace Exhaust Manifold Catalytic Converter Assembly 2004-2015 Nissan Titan

Рет қаралды 37,318

Жыл бұрын

Buy Now!
New Exhaust Manifold Catalytic Converter Assembly from 1AAuto.com 1aau.to/ib/1AEEM00801
This video shows you how to install an exhaust manifold catalytic converter assembly on your 2004-2015 Nissan Titan. This vehicle uses an integrated exhaust manifold and catalytic converter assembly. That means you can replace the manifold, or the catalyst, without needing any cutting or welding.
This process should be similar on the following vehicles:
2004 Nissan Titan
2005 Nissan Titan
2006 Nissan Titan
2007 Nissan Titan
2008 Nissan Titan
2009 Nissan Titan
2010 Nissan Titan
2011 Nissan Titan
2012 Nissan Titan
2013 Nissan Titan
2014 Nissan Titan
2015 Nissan Titan
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa6J/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oa6J/1AXAA00013
• 10mm Socket 1aau.to/oaRj/1AXAA00017
• 14mm Deep Socket
• 14mm Socket 1aau.to/oa82/1AXAA00015
• 15mm Socket 1aau.to/oa82/1AXAA00015
• 17mm Socket 1aau.to/oa82/1AXAA00015
• 21mm Socket 1aau.to/o5M/1AXAA00043
• O2 Sensor Socket
• Trim Tool Set 1aau.to/oXP/1AXXX00006
• Needle nose pliers 1aau.to/oyR/1AXAA00051
• Needle nose pliers 1aau.to/oyR/1AXAA00052
• E10 Inverted Socket
• Ratchet 1aau.to/objN/1AXAA00016
• Socket Extensions 1aau.to/oa82/1AXAA00015
• Torque Wrench 1aau.to/oapQ/1AXAA00044
• Gloves 1aau.to/oEh/1AXSS00048
• M10x1.25
• Safety Glasses 1aau.to/oxX/1AXAA00343
• Sandpaper
• Floor Jack 1aau.to/oSJ/1AXAA00068
• Jack Stands 1aau.to/oMJ/1AXAA00065
• Sanding Block
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 20

@TRQ Жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@toddshook1765 4 ай бұрын

Thank you so much for the exact step by step procedure. Even to mention what size and and how many bolts snd studs. I feel better at attempting to change out myself. Just seem a bit time consuming but doable

@Popstylez Жыл бұрын

Absolutely great video! Quality and explanation is on point!!

@bruceconley1298 Жыл бұрын

Absolutely hands down on a great video…!! Only wish you were here to change mine….. I’d be more than happy to just hold the light….😂😂

@psycobone1 6 ай бұрын

Man i wish i could do it as easily as the video looks .Did you edit out all the curse words ?

@dstate3036 Жыл бұрын

Ok So u did only the driver side . Where is the vid for the pass side?

@TommyKinsey1972 4 ай бұрын

nice camera work!

@lovethehuntOutdoors Ай бұрын

What's the approximate Cost involved for quality parts and labor for a complete job? 2000.00 possibly more depending on the mechanic or exhaust shop if you're not able to physically do it yourself

@anthonywilliams7432 Ай бұрын

Hey I've seen other install videos for this and I'm curious. Does removing the studs prevent lifting the engine? I don't really want to remove the engine mounts. It also looks like the left side is the easier side because most people are showing that side vs. the right. Thank you.