Buy Now!
New Brake Pad & Rotor Kit from 1AAuto.com 1aau.to/ia/1ABFS02671
This video shows you how to install new front brake pads and rotors from TRQ on your 2007-2014 Chevrolet Silverado 2500 HD. Brake pads wear out over time, much like tires, and need replacing, on average, every 50,000 miles, with variations depending on driving habits and environment. Brake rotors may also need to be replaced if they are warped or grooved. Often, it’s safer and more cost effective to replace pads and rotors at the same time. Squealing or grinding noises, or wheel vibration are all symptoms of worn brakes.
Estimated installation time for a professional technician is approximately: 1 hour 18 minutes
This repair was done on a 2011 Chevrolet Silverado 2500 HD LT 6.0L Crew Cab Pickup 4-Door 4WD Automatic and the process should be similar on the following vehicles:
2007 Chevrolet Silverado 2500 HD
2008 Chevrolet Silverado 2500 HD
2009 Chevrolet Silverado 2500 HD
2010 Chevrolet Silverado 2500 HD
2011 Chevrolet Silverado 2500 HD
2012 Chevrolet Silverado 2500 HD
2013 Chevrolet Silverado 2500 HD
2014 Chevrolet Silverado 2500 HD
Tools you will need:
• 21mm Socket
• 22mm Socket 1aau.to/ot3/1AXAA00266
• Brake Caliper Compressor Tool. Dual Piston. Pump Style. 1aau.to/oaW/1AXAA00289
• 1/2 Inch Impact Gun 1aau.to/oy9/1AXAA00252
• 3/8 Inch Impact Gun
• T30 Socket
• Ratchet 1aau.to/occG/1AXAA00016
• Torque Wrench 1aau.to/obe3/1AXAA00044
• Anti-Seize Grease
• Brake Parts Cleaner
• Bungee Cord
• Cloth Rags 1aau.to/oQw/1AXSS00035
• Gloves 1aau.to/obcm/1AXSS00048
• Safety Glasses
• Silicone Brake Parts Lubricant
• 10mm Hex Socket
• Floor Jack 1aau.to/oaAc/1AXAA00068
• Jack Stands 1aau.to/oamZ/1AXAA00065
• Wheel Chocks
• Wire Brush 1aau.to/oyL/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.