Buy Now!
New Tie Rod from 1AAuto.com 1aau.to/ia/1ASTE00984
This video shows you how to replace the inner tie rods on your 1993-1997 Ford Ranger. The inner tie rod has a ball joint that can wear over time, causing a clunking noise, loose steering, and eventually, other problems with the wheel and suspension components. It’s a good idea to replace your inner tie rods as soon as you notice any of these symptoms.
This process should be similar on the following vehicles:
1993 Ford Ranger
1994 Ford Ranger
1995 Ford Ranger
1996 Ford Ranger
1997 Ford Ranger
Tools you will need:
• Pry Bar 1aau.to/oa/1AXAA00020
• 16mm Wrench
• 15mm Socket 1aau.to/oa/1AXAA00015
• 19mm Socket 1aau.to/oa/1AXAA00043
• 21mm Socket 1aau.to/oa/1AXAA00043
• Air Compressor
• Blowtorch
• Pickle Fork
• Large Locking Pliers
• Pliers
• Side Cutters
• 3/8 Inch Air Impact Gun
• Ratchet 1aau.to/oa/1AXAA00016
• Torque Wrench 1aau.to/oa/1AXAA00044
• Anti-Seize Grease
• Cloth Rags 1aau.to/oa/1AXSS00035
• Rust Penetrant
• Sledge Hammer 1aau.to/oa/1AXAA00091
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.