Buy Now!
New Sway Bar Link from 1AAuto.com 1aau.to/ia/1ASS...
Sway bar links connect the sway bar (stabilizer bar) to other suspension components. They have a movable joint that can be damaged or wear out over time. When that happens, the joints get loose, and rattle. This video shows you how to install new TRQ sway bar links on your 2004-2008 Acura TL.
This process should be similar on the following vehicles:
2004 Acura TL
2005 Acura TL
2006 Acura TL
2007 Acura TL
2008 Acura TL
Tools you will need:
• 14mm Wrench 1aau.to/oa/1AXA...
• 17mm Wrench 1aau.to/oa/1AXA...
• 14mm Socket 1aau.to/oa/1AXA...
• 17mm Socket 1aau.to/oa/1AXA...
• 19mm Socket 1aau.to/oa/1AXA...
• Blowtorch
• 3/8 Inch Air Impact Gun
• Socket Extensions 1aau.to/oa/1AXA...
• Torque Wrench 1aau.to/oa/1AXA...
• 5mm Hex Wrench
• Center Punch 1aau.to/oa/1AXA...
• Hammer 1aau.to/oa/1AXA...
Subscribe: / @trq
Check out our playlist:
Acura TL 2004-2008 3rd Generation: • Acura TL 2004-2008 3rd...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.