how to Replace Front Sway Bar Links 00-07 Toyota Highlander

Рет қаралды 33,217

1A Auto: Repair Tips & Secrets Only Mechanics Know

6 жыл бұрын

Buy Now!
New Sway Bar Link from 1AAuto.com 1aau.to/ia/1ASSL00098
In this video, 1A Auto shows you how to remove, replace, and install a sway bar end link. This video is applicable to the 04 Toyota Highlander
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oany/1AXAA00013
• Complete Metric Wrench Set 1aau.to/oqs/1AXAA00010
• Complete Metric Socket Set 1aau.to/osM/1AXAA00043
• 1/2 Inch Breaker Bar 1aau.to/omq/1AXAA00078
• Torque Wrench 1aau.to/owI/1AXAA00044
• Anti-Seize Grease
• Brake Parts Cleaner
• Paper Towels 1aau.to/oh3/1AXSS00035
• Rust Penetrant
• 6mm Allen Wrench 1aau.to/oaG/1AXAA00007
• Floor Jack 1aau.to/ou3/1AXAA00068
• Hammer 1aau.to/omS/1AXAA00091
• Jack Stands 1aau.to/ovj/1AXAA00065
• Wire Brush 1aau.to/oeR/1AXAA00079
For More Info visit us at 1aau.to/h/bo2/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 14

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@charlieg6913 5 жыл бұрын

I like that you used a "real" vehicle. I see a lot of videos where everything is pre-prepped and surgically clean. Everything on my car is always rusted/stuck on. You always run into issues, and you guys included that. Good stuff. Thanks for the video. It was done really well.

@1AAuto 5 жыл бұрын

Thanks for the feedback and for checking us out. 1aauto.com +Charlie G

@LinkedMember 4 жыл бұрын

I've read that applying a greaser to the wheel at 01:30 is not a great idea. Once you've finished th ejob and put the tire back on, you risk the bolts loosening overtime because of the vibrations. I don't know whether or not rust penetration is the same as a greaser (like WD40) but I high do not recommend spraying that. Using a hammer should be enough.

@lciummo1 8 ай бұрын

Those wheels look just like mine.

@DannyMerida7 4 жыл бұрын

My mechanic did this job in my sienna and after that now is making a noise when I do u turn. It doesn’t need any grease or something. Because I don’t like the noise it does now. Btw what’s that thing you add in the rim where the break rotor goes? Thank you 🙏

@azulmarinoify 3 жыл бұрын

rear wheels..