Рет қаралды 48,001
Buy Now!
New Control Arm with Ball Joint Set from 1AAuto.com 1aau.to/ia/1ASFK01740
This video shows you how to install a new TRQ upper control arm on your 03-09 Toyota 4Runner.
• Check here for more videos on the 2002-09 Toyota 4Runner: • Toyota 4Runner 2002-20...
This process should be similar on the following vehicles:
2003 Toyota 4Runner
2004 Toyota 4Runner
2005 Toyota 4Runner
2006 Toyota 4Runner
2007 Toyota 4Runner
2008 Toyota 4Runner
2009 Toyota 4Runner
Tools you will need:
• Flat Blade Screwdriver 1aau.to/osu/1AXAA00013
• 18mm Wrench
• 19mm Wrench 1aau.to/oe8/1AXAA00010
• 10mm Socket 1aau.to/opA/1AXAA00017
• 12mm Socket 1aau.to/osv/1AXAA00015
• 19mm Socket 1aau.to/oie/1AXAA00043
• 21mm Socket 1aau.to/oie/1AXAA00043
• Push Pin Pliers
• Side Cutters
• 1/2 Inch Air Impact Gun 1aau.to/obr/1AXAA00252
• Ratchet 1aau.to/otY/1AXAA00016
• Torque Wrench 1aau.to/omf/1AXAA00044
• Rust Penetrant
• Hammer 1aau.to/ofe/1AXAA00091
Subscribe: / @trq
Check out our playlist:
Toyota 4Runner 2002-2009 4th Gen: • Toyota 4Runner 2002-20...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.