How to Replace Front Wheel Bearing and Hub 1998-2010 Volkswagen Beetle

No video

How to Replace Front Wheel Bearing and Hub 1998-2010 Volkswagen Beetle

Рет қаралды 12,278

Күн бұрын

Buy Now!
New Wheel Bearing & Hub Kit from 1AAuto.com 1aau.to/ia/1ASH...
This video shows you how to install a front wheel bearing and hub on your 1998-2010 Volkswagen Beetle. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
1998 Volkswagen Beetle
1999 Volkswagen Beetle
2000 Volkswagen Beetle
2001 Volkswagen Beetle
2002 Volkswagen Beetle
2003 Volkswagen Beetle
2004 Volkswagen Beetle
2005 Volkswagen Beetle
2006 Volkswagen Beetle
2007 Volkswagen Beetle
2008 Volkswagen Beetle
2009 Volkswagen Beetle
2010 Volkswagen Beetle
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa7A/1A...
• Phillips Head Screwdriver 1aau.to/oa7A/1A...
• Pry Bar 1aau.to/oKW/1AX...
• 13mm Socket 1aau.to/obag/1A...
• 16mm Socket 1aau.to/obag/1A...
• 17mm Socket 1aau.to/obag/1A...
• 30mm 12-Point Socket 1aau.to/oV/1AAS...
• Bearing Puller
• Bearing Race and Seal Driver 1aau.to/ox/1AXA...
• Brake Caliper Hanger 1aau.to/ogY/1AX...
• Torque Angle Gauge
• Adjustable Wrench
• Snap Ring Pliers
• Ratchet 1aau.to/obkR/1A...
• Socket Extensions 1aau.to/obag/1A...
• Torque Wrench 1aau.to/oaqL/1A...
• Brake Grease
• Copper Anti-Seize
• Gloves 1aau.to/oFJ/1AX...
• Safety Glasses 1aau.to/ozq/1AX...
• 7mm Hex Socket
• Center Punch 1aau.to/ojY/1AX...
• Floor Jack 1aau.to/oTd/1AX...
• Hammer 1aau.to/oNj/1AX...
• Wheel Chocks
• Wire Brush 1aau.to/oqJ/1AX...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 7

@TRQ Жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@jesseaguirre2961 Жыл бұрын

Great info ,, but seems easier to do it on a 20 ton press .

@ladymarie8172 3 ай бұрын

How many hours would a dealership charge to replace drivers front bearing, new spring clamp for bearing & 3 new bolts? Or How much would you charge to do that service! Thanks for the reminder it needs an alignment when done.

@soniagonzales9144 Жыл бұрын

Great video!

@JJCCVV 4 ай бұрын

Good video Pero al desmontarlo hay un disco viejo y al momento después hay un disco de freno completamente nuevo .....????

@azarelthecreator7098 Жыл бұрын

Can those bolts that hold the hub on be replaced with lugs temporarily? I have a new hub to be put on by the shop and no parts stores can get those dreaded bolts so i had to order them and they are going to take a while to show up and i need it fixed. Will the same size lug work in replacement or not? the parts store told me that the lugs with the same threading will work and that either could be used to mount them. The lug they gave me has the same downward slope into the threads as the oem bolt.