How to Replace Front Wheel Bearing & Hub 1996-2002 Toyota 4Runner

Рет қаралды 41,718

Жыл бұрын

Buy Now!
New Wheel Bearing from 1AAuto.com 1aau.to/ia/1AAXX00119
This video shows you how to install a new wheel hub and bearing on your 1996-2002 Toyota 4Runner. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
1996 Toyota 4Runner
1997 Toyota 4Runner
1998 Toyota 4Runner
1999 Toyota 4Runner
2000 Toyota 4Runner
2001 Toyota 4Runner
2002 Toyota 4Runner
Tools you will need:
• Flat Blade Screwdriver 1aau.to/obhU/1AXAA00013
• Pry Bar 1aau.to/oSy/1AXAA00020
• 12mm Wrench 1aau.to/oUR/1AXAA00010
• 10mm Socket 1aau.to/oa7K/1AXAA00017
• 12mm Socket 1aau.to/obrr/1AXAA00015
• 17mm Socket 1aau.to/obrr/1AXAA00015
• 19mm Socket 1aau.to/oafn/1AXAA00043
• 21mm Socket 1aau.to/oafn/1AXAA00043
• 36mm Socket 1aau.to/ob2/1AAST00006
• Press
• Channel-Lock Pliers 1aau.to/oku/1AXAA00139
• Needle nose pliers 1aau.to/oCM/1AXAA00051
• Needle nose pliers 1aau.to/oCM/1AXAA00052
• Snap Ring Pliers
• Straight Cutters
• 1/2 Inch Impact Gun 1aau.to/osk/1AXAA00252
• Ratchet 1aau.to/obyv/1AXAA00016
• Socket Driver
• Socket Extensions 1aau.to/obrr/1AXAA00015
• Torque Wrench 1aau.to/oaCi/1AXAA00044
• Anti-Seize Grease
• Bungee Cord
• Cloth Rags 1aau.to/oBE/1AXSS00035
• Gloves 1aau.to/o2b/1AXSS00048
• Rust Penetrant
• Safety Glasses 1aau.to/oTj/1AXAA00343
• Silicone Paste
• Center Punch 1aau.to/okD/1AXAA00055
• Floor Jack 1aau.to/o3y/1AXAA00068
• Hammer 1aau.to/oTd/1AXAA00091
• Jack Stands 1aau.to/oSe/1AXAA00065
• Pick 1aau.to/oNf/1AXAA00037
• Rubber Mallet 1aau.to/ogE/1AXAA00413
• Vise
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 21

@TRQ Жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@mbraylarak 9 ай бұрын

Regarding the snap ring removal: You just needed to press the bearing back in a bit because when you first pressed out the wheel spindle it created additional pressure on the snap ring.

@danielbydefault231 24 күн бұрын

About to dive into my 97 4runner, thank you for the video!

@davmid 8 ай бұрын

My '02 4Runner needs this repair right now. Thanks for the video. Looking forward to this project.

@threewheelerdonuts8284 10 ай бұрын

Thanks very helpful video! Me and my dad were doing my 02 Tacoma and when we pressed the hub out the inner race came out with the hub. ☹️ we got the bearing replaced but we need to remove the inner race from the hub

@alexsabillon6794 10 ай бұрын

Excelente este es el mismo proceso para una tacoma 99 muy agradecido por compartir tu conocimiento

@RSDemonof907 8 ай бұрын

Good video. Customer bought the full front end kid from y’all. Only downside is no seals are included in the kit you have to source those after

@thuggmtz Ай бұрын

Whats the part number from the inner abs spacer ring that hold down the abs speed rotor ,,anyone??

@khaido2301 10 ай бұрын

U didn’t replace the dust shield 😅

@malas2012 3 ай бұрын

nice and helpfull vid., thanx

@pichanthaboury592 10 ай бұрын

My friend, you are missing metal shield

@user-tv7mj5uq5w Ай бұрын

I'm no mechanic but I've always worked on my own vehicles due to not having funds to pay a shop. I have one question. Is this impossible to do without a press? Removing the bearing from the hub and reinstalling the new bearing?