How to Replace Front Wheel Hub Assembly 2007-2017 Ford Expedition

Рет қаралды 9,054

8 ай бұрын

Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ib/1ASHF00474
This video shows you how to install a new wheel hub and bearing on your 2007-2017 Ford Expedition. Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision.
This process should be similar on the following vehicles:
2007 Ford Expedition
2008 Ford Expedition
2009 Ford Expedition
2010 Ford Expedition
2011 Ford Expedition
2012 Ford Expedition
2013 Ford Expedition
2014 Ford Expedition
2015 Ford Expedition
2016 Ford Expedition
2017 Ford Expedition
Tools you will need:
• Pry Bar 1aau.to/oYV/1AXAA00020
• 18mm Wrench
• 13mm Socket 1aau.to/obIV/1AXAA00015
• 18mm Socket 1aau.to/oaqd/1AXAA00043
• 21mm Socket 1aau.to/oaqd/1AXAA00043
• 22mm Socket 1aau.to/op2/1AXAA00266
• 8mm Socket 1aau.to/obog/1AXAA00017
• Brake Caliper Hanger 1aau.to/oj9/1AXAA00439
• Pliers
• 1/2 Inch Impact Gun 1aau.to/ovH/1AXAA00252
• 3/8 Inch Drive Ratchet 1aau.to/obIV/1AXAA00015
• Swivel
• Torque Wrench 1aau.to/oaRi/1AXAA00044
• Bearing Grease
• Cloth Rags 1aau.to/oGy/1AXSS00035
• Gloves 1aau.to/oauk/1AXSS00048
• Safety Glasses
• 5mm Hex Socket
• Floor Jack 1aau.to/oafd/1AXAA00068
• Hammer
• Jack Stands 1aau.to/o3G/1AXAA00065
• Punch
• Wheel Chocks
• Wire Brush 1aau.to/ouT/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 10

@TRQ 8 ай бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@DragonsDivine Ай бұрын

Phenomenal vid. In the driveway, 90 minutes from parking to having the last tool put away in the garage. Super useful video. Thanks!

@Schmiddyfly 3 ай бұрын

I really appreciate your videos. So clear and very precise and informative. Your videos have allowed me to change all kinds of parts on my expedition. This channel is the best

@pawnone 18 күн бұрын

don't forget thread lock on the half shaft nut they like to work them selves loose and if you don't have your hub caps on the nut and the cover will get lost ask me how I know?

@mustang9549 7 ай бұрын

I got a 2018 4WD Navigator you can do next 😅

@gilbertoaguilar6969 3 ай бұрын

Thanks 👍

@sandracampbell2050 15 күн бұрын

would this also apply to a 2016 navigator ?

@Bigdaddy09249 2 ай бұрын

How did you keep the cv axle from spinning when removing the axle nut

@orlandogotay9853 3 ай бұрын

Do you have an inspection guide for the existing Hub Assembly? Do you recommend lubrication of otherwise functioning Hubs? I have a 2011 with >150,000mi with no wear signs and I am wondering whether this should be inspected.