How to Replace Fuel Pressure Regulator 88-98 GMC K1500

Рет қаралды 377,147

1A Auto: Repair Tips & Secrets Only Mechanics Know

7 жыл бұрын

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/199/i/fuel-pressure-...
In the video, 1A Auto shows how to remove and replace a faulty fuel pressure regulator. The video is applicable to the 1996 GMC Sierra K1500.
This process should be similar on the following vehicles:
1988 GMC K1500 Truck
1989 GMC K1500 Truck
1990 GMC K1500 Truck
1991 GMC K1500 Truck
1992 GMC K1500 Truck
1993 GMC K1500 Truck
1994 GMC K1500 Truck
1995 GMC K1500 Truck
1996 GMC K1500 Truck
1997 GMC K1500 Truck
1998 GMC K1500 Truck
1999 GMC K1500 Truck
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oa3/1AXAA00013
• 16mm Wrench
• 10mm Socket 1aau.to/oaB/1AXAA00017
• 8mm Socket 1aau.to/oaB/1AXAA00017
• Channel-Lock Pliers 1aau.to/or/1AXAA00139
• T20 Driver 1aau.to/ov/1AXAA00008
• Ratchet 1aau.to/obf/1AXAA00016
• Socket Extensions 1aau.to/oaS/1AXAA00015
• Torque Wrench 1aau.to/oat/1AXAA00044
• Paper Towels 1aau.to/ow/1AXSS00035
• Pick 1aau.to/oA/1AXAA00037
Subscribe: / @1aauto
Check out our playlist:
Chevy Auto Repair Videos: • Chevy Auto Repair Videos
GMC Sierra K1500 1988-1998: • GMC Sierra K1500 1988-...
For More Info visit us at 1aau.to/h/bm/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 228

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@cadendesmond7044 2 жыл бұрын

i know it is kinda randomly asking but does anybody know a good website to watch new tv shows online ?

@georgeswaner757 2 жыл бұрын

Hhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhhh

@jollyranchhand 4 жыл бұрын

Whoever designed this at gmc should have to service fuel regulators in hell for eternity...

@chevytahoe9430 3 жыл бұрын

🤣

@dallasszafwinski2364 3 жыл бұрын

Hell yeah they should

@stevethomas5209 Жыл бұрын

I literally just finished doing this job 20 minutes ago then I came across your post here and hit the floor laughing. Your so right this job was a ball buster. 95 degrees heat too I'm completely beat down thanks for the laugh.

@michaelszczys8316 Жыл бұрын

Speaking of heat, one of the worst jobs I took on was changing heads on a neighbors Chevy van. 100,000 miles all boxed in and running maximum temperature made every bolt in the intake manifold like an old exhaust manifold bolt. Plus totally baked grease and sludge filled all the pockets around the bolt heads making it impossible to put socket on until you chiseled it out with a chisel. I spent a whole day just trying to get the intake bolts all out. On of his friends who was a diesel mechanic came by and said he would have had that done in 20 minutes, I handed the hammer and chisel to him and said " here you go ". I couldn't imagine one of these in that van. Everything would be breaking like it were made of glass.

@daviddoniassr.2851 5 жыл бұрын

Finally someone actually taking the time to show how to remove the fuel pressure regulator and how to put it back on . THANK YOU.

@1AAuto 5 жыл бұрын

+David Donias Sr. Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

@michaelszczys8316 Жыл бұрын

I'm checking out how you shove that thing in there under all that other stuff without knocking the gasket off. How does that fuel regulator plug into vacuum?

@TheMastersDj 3 жыл бұрын

I was wanting to replace just the regulator but once I got to it, I saw that I needed my fuel injector assembly also, I replaced it, came with the regulator so I did the whole thing. Thank you, I did everything the way you said, it all worked out great.

@jennadeknight9056 5 жыл бұрын

I love how calm you explain it all. So much better than being yelled at in person lmao

@keithwatson8228 2 жыл бұрын

Is that a 97 in your picture?

@msbconnects 2 жыл бұрын

Thank you, made the job less intimidating if no less tedious! Appreciate the clear step by step directions. I found I could replace the regulator without removing the whole assembly, didn't want to risk breaking any injector lines!

@1AAuto 2 жыл бұрын

+Michael Burgman Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@lisafuentes38 6 жыл бұрын

This is the best video I've seen showing any kind of work on a 350 Vortec!

@1AAuto 6 жыл бұрын

+Lisa Fuentes Thanks for checking us out! Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

@triptheroad 5 жыл бұрын

Yeah old truck videos are usually filmed with a potato

@michaelszczys8316 Жыл бұрын

Good video, only thing it could use is some real close shots of things. Can't see too much on a phone.

@Homeflav 3 жыл бұрын

In the process of replacing my injectors on my 97 you made me confident to do my own I'm not a mechanic but common sense will be put into effect thanks for the How To!!!

@1AAuto 3 жыл бұрын

+Jerome Brooks Thank you! We love empowering our customers and showing how to perform DIY auto repairs with our high-quality auto parts. 1aau.to/m/Shop-1AAuto-c

@danielfuentesdominguez4751 2 жыл бұрын

After 2 whole years of my truck hesitating i finally got it! I was able due to without disconnecting the rear fuel lines. Truck starts like it's brand new!

@dandriver128 5 жыл бұрын

I just figured it out. Lol it doesn't need a vacuum line because it's inside the intake with the vacuum. Lmao sorry, I feel like a noob now. Lol. Great video by the way

@1AAuto 5 жыл бұрын

+Dan Driver Thanks for checking us out. Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

@jackparker8686 6 жыл бұрын

Next question oh my God isn't there somewhere else they can put that

@dennisfrier3191 4 жыл бұрын

Some of the chevy trucks of this same time frame have it on the side of the motor, within easy reach , go figure. Couldn't get that lucky myself.

@luvyabroproductions 5 жыл бұрын

Thanks for an awesome video. One of the best how-to vids I've ever seen. I'm doing this on my 99 Suburban because of the clarity and attention to detail on this video Thank You Guys!! My mechanic hates you - lol

@1AAuto 5 жыл бұрын

+Luvyabro Productions Thank you!

@lamutaafua 5 жыл бұрын

Can u tell us what diagnosis or reason why u would change the fuel pressure regulator? What symptoms would the car have? Etc?...thanks

@TLanzzz75 Жыл бұрын

If you are having trouble starting your truck after installing this, put a bit of oil on the o rings and really try and create a good seal. It is harder than it looks to put back in place. Twist and push. Also, be careful with the small o ring. I dropped mine in the fuel rail and it was a pain to get out.

@rsnyderP Жыл бұрын

This video was great! Better than the fuel injector replacement I watched earlier. Loved the reassembly instruction!!!

@petestroup4000 Жыл бұрын

Excellent video… I’m not much of a mechanic, but this went much easier than I thought… Unfortunately, the fuel pressure regulator was not my problem after all of this I still had very low pressure until I found an open ground between my firewall and my frame …soon as that was replaced my pressure went up and my truck started

@1AAuto Жыл бұрын

+Pete stroup Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@cadegolden3664 6 жыл бұрын

I really dig the video, and honestly your advertisement was spot on.

@1AAuto 6 жыл бұрын

+Cade Golden Thanks for checking us out! Shop here for high quality auto parts: 1aau.to/m/Shop-1AAuto-c

@ModelARider Жыл бұрын

This video took all intimidation out of this job. My engine was the 4.3 V6 but basically the very same setup minus 2 cylinders. I also replaced the spider injector assembly while I was in there. I left the old spider assembly on our porch and my wife killed it with a broom. JK. Lol. Thanks again!

@seabass22 2 жыл бұрын

The real question is. What else should we replace while we are in there?

@taylorh3930 5 жыл бұрын

I got fusterated just looking at how much work this is I think I'm selling my 98

@bill-un5zg 4 жыл бұрын

Jesse James Curley let me tell ya lol it’s a pain in the dick

@larsbambi1575 3 жыл бұрын

How do I know if it is bad? 2000 chevy pick up ..no power under a load. Replaced a bunch of stuff. Still doing it. No check engine lights on 🤔

@stylezinsight3612 3 жыл бұрын

...I clicked on your link below, I hit the 3 drop-downs, 1997, Chevrolet, Suburban K1500, typed in injector manifold. No results, I watched the video, upon removing the part, he called it an injection manifold, typed that in, that gave me the option to click on 'injection manifold' and 2 other options, I clicked on that, that brought up exhaust manifolds. Does 1AAuto have this part, the regulator, and gasket? ...I appreciate ALL of 1As videos and try to buy from 1A as often as possible, at first to patronize those whose videos help me so much so often, and then I've found too that the parts have always been Top Of The Line. Love You Guys, Thank You!!!

@jjesusrramirez45 6 жыл бұрын

you are the best thank you GOD BLESS

@zachwhyte6040 4 жыл бұрын

This video is for 1996 to 1998 chevy pickups with the vortec. 1988 to 1995 tbi engines have the fuel pressure regulator actually inside the tbi unit itself. Since the vortec works off a spider style injector system that leads to a set of fuel rails while the tbi only has two injectors that are actually in the throttle body the regulator cannot be past the injectors. Please start making these distinctions between these trucks, body styles are the same, but interior(yes referring to your radio installation video) and fuel and ignition systems are completely different.

@1AAuto 4 жыл бұрын

+Zach Whyte Thank you for your feedback!

@NGUFlips Жыл бұрын

So I have an 88 c1500 is this job much easier on an 88 ?

@NGUFlips Жыл бұрын

Is there a video for the tbi system

@drakeizzard8129 Жыл бұрын

does it work on a 99 chevy tahoe? it had a 5.7 v8

@josephkinser7974 3 жыл бұрын

it's hard finding a good mechanic

@trinidadgarcia8267 2 жыл бұрын

You make it look too easy Your a champion

@lorenzorodriguez6192 3 жыл бұрын

This is my task next weekend 👍thanks

@gvjester 5 жыл бұрын

Outstanding video!!! Best and most concise I've seen on this subject. Thank you so much!!!

@1AAuto 5 жыл бұрын

+gvjester Thank you for the great reply. We love to empower our customers by showing you how-to perform your own auto repairs while installing our high quality auto parts. Have a great day! 1aauto.com

@buddygallagher1193 8 ай бұрын

I appreciate your videos I learned a lot from thank you

@jamescowan8572 3 жыл бұрын

Does the purge vent solenoid have just one vacuum hose going to it or just one going to the canister notice one side had opened end l shape rubber fitting

@jjesusrramirez45 6 жыл бұрын

DO I HAVE TO CHAGE THE ENTIRE INYECTOR SPIDER OR JUST THE REGULATOR I ONLY HAVE 20PSI PRESURE ON MY LINE SO IM GOIN TO DO THE SAME THING ON MY SCALADE2000

@TheRudy1629 2 жыл бұрын

Im getting charged $560 to do this job.. i watched this video and the price seems great for a job that probably would take me at least a whole day.

@abelscaliber7969 2 жыл бұрын

Yea I though the same damn thing

@OldSchoolNoe 2 жыл бұрын

Very cool! Similar on the astro / safari vans

@billyhudson6603 5 жыл бұрын

Y did you replace it to begin with

@aedanhickey5264 2 жыл бұрын

what does a faulty fuel pressure regulator cause?

@my1after909 4 жыл бұрын

Hi, I've got the spider out of my 2000 Jimmy. Can you tell me how to remove the injectors from the fuel metering body? Thanks

@stevekildal6372 Жыл бұрын

Very good video, thank you 👍.

@poncholopez7428 Жыл бұрын

Excellent video

@mattvangundy 6 ай бұрын

Now when u did this did the bracket have 2 bolts holding it there or one?

@mr.emkevy5817 3 жыл бұрын

Can you/is it recommended to adjust the regulator or can it be tuned?

@RedfishCarolina 2 жыл бұрын

If you do this, don't reuse that old black spider injector or you'll be back in it replacing it soon anyway. Get the green colored MPFI injectors, they fit right in and are vastly more reliable

@mrlafayette1964 3 ай бұрын

This is pretty involved for me so I'll let a pro do it, I have a 97 w/ 150k what else should I have replaced while this is being done?

@JoeZip25 6 жыл бұрын

Why remove the injection manifold? Can't it be replaced right there? Thanx for Your vids.

@nickenzio1 3 жыл бұрын

For what he replaced he didn't need to take off half of the item he removed. I'm not sure if this was a music video or the long way to replace the fuel regulator but I will hire his ass in a second to fix anything that I drive because this brother is detailed lol

@firethorn9134 Жыл бұрын

When ever your ready I made some contacts.

@beastwood6417 3 жыл бұрын

Way to go I don’t think anybody gets the new oring on

@johnnymartens9558 4 жыл бұрын

Thank you so much!! This video made it a breeze to do

@1AAuto 4 жыл бұрын

+Johnny Martens Thanks for checking us out!

@nunyadambidness1444 3 жыл бұрын

Awesome video....is it the same on a 4.3?? Thx

@JohnDisque 5 жыл бұрын

Thank you very much for your video. Is it normal for the o-ring around the fuel-injector box on the inside of the manifold to be all stretched out? It's stretched like an inch and too loose to reuse. What size o-ring do I need? Thank you for your time.

@bill-un5zg 4 жыл бұрын

John Disque when you get the intake manifold gasket it comes in a kit of gaskets and o-rings should have everything you need

@1AAuto 4 жыл бұрын

+bill0006 3433 Thanks for checking us out! 1AAuto.com

@landenwolever1016 3 жыл бұрын

Would love to see this on a tbi. I am looking for a video for my 1988 5.7 and can’t find any.

@thisoldshtbox3626 2 жыл бұрын

You won’t find a video either because the fuel pressure regulator is built into the throttle body, operated by vacuum. Gotta replace the entire throttle body.

@dandriver128 5 жыл бұрын

Does the fuel pressure regulator have a vacuum line connected to it? Or is it pretty much an emergency valve that when fuel hits too much pressure, it let's fuel exit out the "vacuum" port into the intake? I ask because I can't find a vacuum line or any way to regulate the fuel pressure from the pcm. Thanks

@hauldr Жыл бұрын

A guy asked this earlier and another guy commented that it doesn’t need the line some vehicles do have the line but it’s unnecessary

@vincedrapes4341 4 жыл бұрын

is this the same for a 98 Astro 4.3 ?

@jesseh9174 3 жыл бұрын

Doing mine again, still has a hard start even with an ACDELCO. I'm going to try the Professional Delco regulator and hopefully it does the job.

@erikthered3601 3 жыл бұрын

Did the ACDelco solve it?

@jesseh9174 3 жыл бұрын

Update, installed the Professional ACDelco and it fixed the problem. Do not buy the standard ACDelco or you will have to redo it again

@kirbycoppedge6547 6 жыл бұрын

What kind of inspection would you do on the fuel injection manifold to insure it doesn't need replacing?

@luissonoma6255 4 жыл бұрын

What was your experience on that? That's where I'm at, I am being a bit frugal and didn't feel like spending 300 on the whole assembly and only purchased the regulator for fifty. I want to do this tomorrow. I've heard that some of the plastics can become brittle and break. I'll guess I find out the hard way. Worst case scenario, I'll have to wait 2 days before I get the whole assembly from Amazon if things start falling apart, hope not though. I'll try to let it soak in some solvent to clean it up before putting it back.

@gregoryhunt1908 7 ай бұрын

Would this cause losing prime issues? Fuel pump and in line filters have been changed. Occasionally won’t start.

@luissonoma6255 4 жыл бұрын

I wonder what that last nut on the magnet tray went to...

@dubsracing806 5 жыл бұрын

Great info

@1AAuto 5 жыл бұрын

+Dubs Racing Thank you!

@jackparker8686 6 жыл бұрын

This on the box idea. Flame retardant container just like airbag container for example .. That automatically sprays or manually controlled in strategic areas where fire is most likely to start

@michaeldennis7952 2 жыл бұрын

May I ask i have a 1996 chevy suburban 5.7 k 1500. Starts and runs like new unless its summer time. Turn it off to run in the store and come out and it won't start until the next morning,fires right up then! The fuel pressure is perfect and it has a new distributor,plugs,wires,coolent temp sensor none of wich fixed this issue. NO check engine lights on! In the winter months this problem goes away. Thanks for the advice!?👍👍

@saveusall6915 2 жыл бұрын

is this something I can do in a couple hours outside with hardly any workbench space?

@oscarfuentes5577 2 жыл бұрын

Love my 95 chev PU, don't have to have to remove the four tires to replace the sparkplugs.

@waltercardenas7354 3 жыл бұрын

Good video. What is the cost for this job? Thanks

@jackparker8686 6 жыл бұрын

With out of the box idea .. the driver could keep his fuel running as long as he wants to to move out of the way of the accident. But then he or she can the big red button that evacuates the system and shuts the fuel off from the tank

@nunyadambidness1444 2 жыл бұрын

Great video buddy so is there not supposed to be a vacuum line on that fuel pressure regulator

@Gkitchens1 Жыл бұрын

Works on vacuum inside the intake. No line needed on it. Some of them had a short little rubber hose but it's not needed.

@jackparker8686 6 жыл бұрын

I am decent mechanic in that I'm always learning planning to learn.. just an idea I'm a plumber on occasion .....earthquake shut off valve in a vehicle..... when vehicle senses an accident ....at the source.... at the tank.... this fuel would be shut off... possibly fuel lines even evacuated with reverse of system.... just an out-of-the-box engineering idea

@kingofkings2934 3 жыл бұрын

Acually most have that it shuts the fuel pump off when you get in wreck.

@kingofkings2934 3 жыл бұрын

Acually most have that it shuts the fuel pump off when you get in wreck.

@kingofkings2934 3 жыл бұрын

Acually most have that it shuts the fuel pump off when you get in wreck.

@colepruden6791 6 жыл бұрын

Dude, check out the bird or rats nest in the air box !!! Other than that, EXCELLENT VIDEO !!!!!!!!

@markfrazier8646 Жыл бұрын

Glad I wasn't the only one seeing that

@AMAC6313 6 жыл бұрын

Would a fuel pressure regulator cause your truck to loose power if you try to step on it or going up hills like if it were struggling?

@1AAuto 6 жыл бұрын

+Andrew Macias It might, or it could be a bad fuel pump. 1aauto.com

@AMAC6313 6 жыл бұрын

Paul Braam About a 3 or 4 months ago I replaced the fuel filter

@sejonez 11 ай бұрын

Once I get to the control module, I'm stucked... are not three bolts holding it, in my truck are two 10mm nuts, and the bracket goes all back at the intake. I can see you removed only two bolts and piece of cake.

@Plainman98 5 жыл бұрын

Does the top of that lower intake manifold look dirty and should it be cleaned? Why didn't you label the injectors when removing? It would really suck to get those mixed up and realize it after reassembly or are they easy to put back correctly? Should the injectors be cleaned while out of the vehicle as well?

@1AAuto 5 жыл бұрын

+Rob Owings Thanks for watching! You do not have to clean that portion of the manifold, but if you can clean it without getting debris everywhere it wouldn't hurt. All of those injectors are the same stock part, so it shouldn't matter if they get switched around. Again, if you want to take the time to label them it won't hurt. They do not need to be cleaned either unless you notice carbon or gunk build up. 1aauto.com

@Knowledge-IS-Power365 2 жыл бұрын

Also curious about failing to number the injectors... are they labeled already? This will be my 1st attempt at this repair. And alot of miles on it, so considering replacing the injectors and regulator at the same time, as the pressure leaks off so fast it's on 0 by the time I've turned the key off and walked 6 steps back to read the gauge

@dieseldoctor9294 3 жыл бұрын

This is only for 1996-1998 vortec engines with spider injection, this is not for 1988-1995 TBI engines.

@1AAuto 3 жыл бұрын

+Diesel Doctor Matt Thanks for checking us out! 1AAuto.com

@604motorsports 3 жыл бұрын

Supposedly this is the same procedure for a 2000 GMC Savana 3500 with the 5.7L engine?

@patrocman4818 2 ай бұрын

How fo you test it?

@burtonterge8475 3 ай бұрын

I need info for a 92 chevy Silverado 5.7 please

@mattvangundy 6 ай бұрын

Yall got a wiring diagram with each label name?

@linaressebastien7825 4 ай бұрын

Where is the 2012 CADILLAC ESCALADE FUEL PRESSURE REGULATOR Located?

@jackparker8686 6 жыл бұрын

Which begs the obvious question..... is there somewhere else they can put that?

@chrisquick7160 6 жыл бұрын

I've thought about using high temp red rtv (up to 650 degrees Fahrenheit) instead of a gasket. What are your thoughts on it?

@derrickyochapman4308 5 жыл бұрын

DID IT WORK FOR YOU

@rayp.454 3 жыл бұрын

Wow, he did it in 23 minutes! Be sure to change the manifold gasket. If you have a vacuum leak after all that, you will want to send your truck off a cliff.

@1AAuto 3 жыл бұрын

+Ray P. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@rubylester1737 5 жыл бұрын

What was the vehicle doing for them to have the fuel pressure regulator replace. Please let me k8

@derrickyochapman4308 5 жыл бұрын

PROBABLY DUMPING TO MUCH GAS CAUSING BLACK SMOKE

@lamutaafua 5 жыл бұрын

Yes what were the symptoms??

@mikec6014 4 жыл бұрын

my friends hesitated to start and when it did start it idled low and cut off alot like it was starving for the right amount of fuel to run correctly

@dennisfrier3191 4 жыл бұрын

mine is losing fuel pressure, and won't start , has new fuel pump. pressure goes to 55 when cranking and drops to 0 when stop cranking.

@tdw5933 7 ай бұрын

You have the hood off too!?

@DJBigRick870 2 жыл бұрын

Can this cause loud humming/whining sound coming from fuel lines?

@wallacerutkowski3884 2 жыл бұрын

Very possible. Normally the fuel pump will charge the line before starting then shut off. With a faulty regulator the pump can continue to run causing pressure to be returned to the tank

@bobbywren123 Жыл бұрын

😮, I've got a 96 F150 and a 96 Silverado, the Ford's Fuel Pressure Regulator is So much easier and faster to replace, nothing like all this

@ianwilds3139 4 жыл бұрын

Did you just replace the screen and o-rings? It looks like you put the old fpr back in.

@Ripcurl552002 2 жыл бұрын

He says in video he is showing how to replace, using old regular.

@blairjosephbernard2011 4 ай бұрын

Your making the job way harder bud! All You have to do is take upper intake manifold off and you don’t need to take the hole complete injector assy off at all you need is unclip fuel regulator ! I can see the fuel regulator clean as day light work smart not hard !

@mathewwebb4345 3 жыл бұрын

And is this the same as a 7.4 454?

@Devo1987 4 жыл бұрын

So do you need to remove the distributor?

@1AAuto 4 жыл бұрын

+Devo Thanks for watching! You just need to undo the bolts to give enough slack, it doesn't have to be fully removed.

@mikepopham7191 3 жыл бұрын

Isn't there a vacuum line that goes to the other end of the fuel pressure regulator. More specifically the one that is not plugged into the Spider injector and is facing downward?

@blutorlz3 3 жыл бұрын

For anyone wondering the same thing, the answer is no... The vacuum line on a fuel pressure regulator normally goes to a source of manifold vacuum. However, this fuel pressure regulator is inside the manifold already in vacuum.

@LordWillyGee 3 жыл бұрын

Does this problem caused a code (?number) Multi misfire, act like losing power then some minutes go out, but come back on later on? (Bad Gas?) or it the start of another problem fuel injector maybe, bad fuel pump (Pump was chang out 7+ year ago?) 316,100 mile on it.

@Knowledge-IS-Power365 2 жыл бұрын

Mine has difficulty starting - till I break out the starting fluid. Still not 100% sure if it's the pump, regulator or injectors leaking down.

@peterpiper4619 4 жыл бұрын

Title says pressure regulator not the intake manifold

@Lucky13tiki 2 жыл бұрын

It kinda seems you didn't really have to remove the whole spider assembly to remove the pressure regulator you could of removed it while the lines where still connected

@tylerdfoust6071 3 жыл бұрын

Did anyone else notice that they didn't actually replace with new? If im going through all this work on my 98, I'll be sure to pay for the $560.00 kit that replaces all the sensitive components that could fail from any dirt or particulates that enter. I just replaced my engine so take my word for what it's worth and do the job right folks

@1AAuto 3 жыл бұрын

+Tyler Foust Some of our videos are made for demonstration purposes only and are not because the part needs to be replaced in the vehicle. Thank you for watching.

@bryanhicks1460 3 жыл бұрын

He did say he’s putting the old one back on just to show us how it’s done

@faditarapolsi2898 5 жыл бұрын

geez.. I need to do this in my 96 Express. I think it would be easier to add an aftermarket regulator to the return line.

@anthonyjackson1250 3 жыл бұрын

Great video but I am still gonna have to have 2 guy's 1 to work on it and one to yell at or to take mental health advice from.😢😄👍

@sambenavidez1278 3 жыл бұрын

You can do it without removing whole assembly.

@Ripcurl552002 2 жыл бұрын

Show the how to do it video.

@josueg88209 2 жыл бұрын

I just did all this work and still 60psi then when the pump stops before ignition psi drops suddenly to 10psi.

@gildoegonzo5741 4 жыл бұрын

👍👍👍👍👍

@jimmymullins4997 6 жыл бұрын

What is the white wire on top of the injector connector? Mine has one but it is not connected to anything.

@Cambpro 6 жыл бұрын

It is just a retaining clip for the harness

@franke.2816 4 жыл бұрын

Title says "88 - 98 " would it be same procedure for 99 ?

@1AAuto 4 жыл бұрын

+Frank E. At this moment, the closest how-to video we have to your request is for this vehicle, which is very similar to the one you have. The steps may not be 100% the same, but should contain an adequate amount of information necessary for accomplishing this task:

@thisoldshtbox3626 2 жыл бұрын

This video is for 96-98 NOT 88-95! Totally different set up on 88-95!

@demz800 3 жыл бұрын

I hope you answer me even though it has been 3 years. I have an issue when I’m driving my 96 suburban. It glitches or I don’t know how to explain it, English isn’t my first language. When I drive from a full stop it stutters like I’m taking my foot off the throttle, even tough I have my leg on the throttle steady.

@1AAuto 3 жыл бұрын

+Abdurhman Albeshar We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@jhanlon1903 5 жыл бұрын

dont need music good video why not new injectors while apart thanks

@1AAuto 5 жыл бұрын

+jhanlon1903 Yes that would be a great time to put in new feul injectors. The reason we didn't in this particular video was because we were just showing how to replace the fuel pressure regulator