Рет қаралды 41,203
Buy Now!
New High Pressure Fuel Pump from 1AAuto.com 1aau.to/ia/1AFP...
This video shows you how to install a fuel pump on your 2010-2016 Cadillac SRX. Combustion engines need three things to operate: fuel, air, and spark. If your fuel pump isn’t delivering the fuel your engine needs, it will run poorly, or not at all. Or, the pump is fine, but your fuel gauge isn’t working. Many modern pumps include an integrated sending unit. Either way, a new engineered to fit fuel pump for TRQ is just what you need.
This process should be similar on the following vehicles:
2010 Cadillac SRX
2011 Cadillac SRX
2012 Cadillac SRX
2013 Cadillac SRX
2014 Cadillac SRX
2015 Cadillac SRX
2016 Cadillac SRX
Tools you will need:
• Phillips Bit in a Ratchet 1aau.to/oM/1AXA...
• Phillips Head Screwdriver 1aau.to/oPV/1AX...
• 17mm Wrench 1aau.to/onj/1AX...
• 10mm Socket 1aau.to/oIQ/1AX...
• 15mm Socket 1aau.to/oPk/1AX...
• 19mm Socket 1aau.to/os8/1AX...
• 22mm Socket 1aau.to/oc9/1AX...
• Trim Tool Set 1aau.to/opL/1AX...
• T30 Socket
• Swivel
• Drill
• Cloth Rags 1aau.to/ohf/1AX...
• Paper Towels 1aau.to/ohf/1AX...
Subscribe: / @trq
Check out our playlist:
Cadillac SRX 2010-2016 2nd Generation: • Cadillac SRX 2010-2016...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.