How to Replace Fuel Rail With Injectors 97-06 BMW 325 Xi

No video

How to Replace Fuel Rail With Injectors 97-06 BMW 325 Xi

Рет қаралды 76,614

1A Auto: Repair Tips & Secrets Only Mechanics Know

Күн бұрын

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/197/a...
In the video, 1A Auto shows how to remove and replace the fuel rail with injectors attached. The video is applicable to the 97, 98, 99, 00, 01, 02, 03, 04, 05, 06, BMW 325Xi, and similar E46 vehicles.
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oXi/1AX...
• 10mm Wrench 1aau.to/ojV/1AX...
• 19mm Wrench 1aau.to/ojV/1AX...
• 10mm Socket 1aau.to/oHX/1AX...
• Pliers
• Side Cutters
• T30 Socket
• Ratchet 1aau.to/oYh/1AX...
• Socket Extensions 1aau.to/oM3/1AX...
• Cloth Rags 1aau.to/ofi/1AX...
• Pick 1aau.to/ofz/1AX...
• Wire Brush 1aau.to/ocZ/1AX...
For More Info visit us at 1aau.to/h/bNH/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 58

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@danieleremian Жыл бұрын

i have 2005 325i and just replaced injectors and you video was very helpful, my ignition rail that clips to injectors does not have the secong plug in the middle of the intake, although there is a broken piece in the hole. any thoughts

@Austigm 4 жыл бұрын

Thanks for not hiding the difficulties . Thumbs up

@1AAuto 4 жыл бұрын

+اوستيج Thanks for checking us out! 1AAuto.com

@ralphc8500 Жыл бұрын

It would of been nice if in the video you would of shown why you removed the fuel rail, once you had it removed a commercial started for A1 auto then the video restarted with you reinstalling the Fuel rail I was hoping you would show how to clean the Fuel Rail as I’m getting Code P171 & P174 lean fuel mixture .

@doylekline3896 6 ай бұрын

You don't need to remove those clips on the injectors. You just pry up gently on the electrical connection

@gonzaloportillo4594 4 жыл бұрын

this video help me a lots....tank u guys and tanks for sharing

@edsonluiz1002 3 жыл бұрын

Meus parabéns o melhor vídeo do KZfaq e olha que eu procurei bastante , agora segura o Like

@kendtchileninjah5905 2 жыл бұрын

I like that you never cut out any of the installation/replacement. Clear videos. Thanks for helping us out. I have to change a fuel pump in my e46 tomorrow on a full tank and I read that I may have to dig into the rail/injectors. One question I have is about my strut bar, do you think I’ll have to remove it?

@jdmslaterTv 2 жыл бұрын

The fuel pump is in the passenger side back seat .. you don't have to go under the hood with e46s

@stanleyplock1181 2 жыл бұрын

How do I disconnect the injector from the Rail to see if the fuel is being pumped and remove Water? (Skipped that part...!)

@bybek123 2 жыл бұрын

Thank you. Very good , professional video.i learned a lot.

@officialyungtwizted3858 Жыл бұрын

Yeah ummm how do u actually replace specific injectors how do you take them out of the rail itself? U never showed that part.

@3340edward Жыл бұрын

I love all y’all videos every detailed and step by step. Is there a video for the exhaust manifold for the M54 on a X3?

@adcurtin 3 жыл бұрын

9:10 sweet. I need to replace the fuel line in my E46, and removing the fuel rail seems way way easier than removing the throttle body and all the stuff

@martaviouswilliams7569 Жыл бұрын

Where’d you get your fuel rail i need to replace mine on my 2004 bmw 330ci

@howlingmedia4354 2 жыл бұрын

That looks like fun!

@freedom5032 Ай бұрын

I replaced the fuel injector that wasn't working and the new one is not working. So is there a fuse or relay for each injector?

@RoleyChiu 4 жыл бұрын

Thanks for the video: will be doing this soon

@user-du2pw6sg1m 3 ай бұрын

Is the vortex breather Cause engine oil shortages?

@user-du2pw6sg1m 3 ай бұрын

How do you disable the BMW HVAC system from turning on automatically during start up? I don't want it to start right away when I start the car. Turning the HVAC off before turning off the car does not seem to help x5 e53

@frdbvf6474 4 жыл бұрын

Hello I have a problem please help me I have a Bmw e39 520 yer 96 engine rolls not exceeding 5 thousand laps

@edkalsbeek1765 3 жыл бұрын

Thanks. Very good video

@user-du2pw6sg1m 3 ай бұрын

Hello friend I bought a new air sensor and after connecting it, the car became shaking, and while pressing the accelerator pedal, there is no torque in the car, after that, the car stopped working, my friend, does the new sensor need programming??

@user-du2pw6sg1m 3 ай бұрын

Hello friend What is the reason for the lack of engine oil with no smoke from Shakman but I smell

@edkalsbeek1765 3 жыл бұрын

Very good video. Thanks

@kyngsley1 Жыл бұрын

Great video. I have a regulator on my 1992 325i fuel rail with a hose at the bottom. It looks like a vacuum hose. Do you know Where it gets attached to

@ravsinghrajput2105 4 жыл бұрын

Love the video,, Good job

@1AAuto 4 жыл бұрын

+Rav Singh Thanks for checking us out! 1AAuto.com

@ravsinghrajput2105 4 жыл бұрын

@@1AAuto no problem, I bought some parts from you guys few months ago and thanks

@JMUDoc 3 жыл бұрын

Is there a service interval for these seals? They are very cheap, but I don't want to tear my engine apart if mine don't need doing 😁

@jacobc786 7 ай бұрын

Hi, I have a 2004 330Ci. It is leaking fuel from the injectors only at below freezing temperatures. It always starts/runs perfect and doesn’t leak at normal temps. Is it worth replacing o rings? Or are ‘04 injectors known to leak from the injector body when freezing? If I have to replace injectors do you have to calibrate? Thank you for any recommendations/advice

@peterlewis2881 11 ай бұрын

Rim replacing the Starter on a 2000 323ci and I need to remove the Manifold. Can the manifold be removed without removing the fuel rail? The clips securing the injector electrical connectors are placed awkwardly. Years ago I removed the manifold to replace the Coolant Temperature Sensor. It wasn't that difficult then. I must have reinstalled things incorrectly.

@JMUDoc 2 жыл бұрын

You can use Vaseline on the injector seals - it is petroleum jelly, after all, and these seals are sitting in fuel.

@billrinehart110 4 жыл бұрын

great video BUT . . . there is no discussion of the injectors! what they look like, how to change them??

@1AAuto 4 жыл бұрын

+billrinehart110 Thanks for the tip! We'll pass this info along to our production team.

@damienhill8736 2 жыл бұрын

Only thing I struggled with was removing the injectors from the fuel rail and it’s not even in the video, kinda disappointed. The rest of the video was fine

@303up6 Жыл бұрын

@@damienhill8736 how do u remove them

@jesusvalbuenap3617 2 жыл бұрын

Hi it was really helpful but i have a concern. Does the injectors have an exact order?

@2Spookeh4Me 2 жыл бұрын

Old but no. they''re interchangeable

@kevinleer7631 2 жыл бұрын

Whats the wire thats connected all the way to the back of the firewall on the black harness that goes in top of the injectors?

@plug1889 Жыл бұрын

I know this is a old comment but I believe they are O2 sensors mine don’t have anything connected to them and I was a bit concerned

@kervinmwandayi4304 2 жыл бұрын

Thanks for

@jeremypowers4647 3 жыл бұрын

Why would you use a pick as a pry bar?

@JoseSilva-xn7mv 3 жыл бұрын

Hi do you think you can help me out I have a misfire on cylinder three replace the coil replace the spark plugs Check for vacuum leaks all checked out good check the EVP replace it and I still have a misfire you think might be a bad injector

@1AAuto 3 жыл бұрын

+Jose Silva We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@Jrock_bands 4 жыл бұрын

Can you clean them with carb cleaner ? How you know if they not good anymore ? My bmw 325xi won’t start without starting fluid and it’s not the pump or the filter replaced as a rookie watching your videos 😂 did good doe thanks

@1AAuto 4 жыл бұрын

+Jrock_464 Thanks for checking us out! Hard starting. One of the first symptoms of a potential problem with the fuel rail sensor is hard starting. Decrease in power, acceleration and fuel efficiency. Another symptom of a potential problem with the vehicle's fuel rail sensor is engine performance issues.

@user-du2pw6sg1m 3 ай бұрын

مع عدم ظهور الدخان من شكمان

@Foxbat1155 3 жыл бұрын

Ineed a video for the m52b20, not this exact engine.

@1AAuto 3 жыл бұрын

+Co Cacola We don't have a how-to video for your vehicle right now, but the basic steps in this video should be enough to do this task. Buy this part for your vehicle on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@swankypants6227 Ай бұрын

WOWOWOWOWOWOWO

@bamsr9051 4 жыл бұрын

Hai, do i need to release one side of the clip of the injector or both side of the clip to release the harness?

@1AAuto 4 жыл бұрын

+Bahri Bohari Thanks for checking us out! You would be best to undo each of the sides of these clips to ensure the injectors stay where they are rather than having some get pulled with the rail and others stay put. 1aauto.com