How To Replace Harley 4 Speed Transmission Seal w/ Added Sealing Trick

No video

How To Replace Harley 4 Speed Transmission Seal w/ Added Sealing Trick

Рет қаралды 16,201

Stew_McAndrew / Spud Co Speed & Custom

Күн бұрын

Knucklehead / Panhead / Shovelhead 4 Speed Jockey Or Ratchet Top 4 Speed Transmission Seal Replacement With Trick For A Better Seal!!
Please Like & Subscribe
Any Questions? Just Ask In The Comments Below!

Пікірлер: 32

@kimber4573 Жыл бұрын

SMACK DUDE!! After watching DIY videos over many years, I've seen only a couple of videos of this quality. It's quality videos like yours that give people the confidence to fix things ourselves. Thanks!!

@Stew_mcandrew Жыл бұрын

Thank You👊🏻

@1981lowrider Жыл бұрын

Outstanding video format. Clear text for your instructions and good reviews of parts and areas you’re referring to. Well done.

@Stew_mcandrew Жыл бұрын

Thanks🤙🏻🤙🏻

@retired815 Жыл бұрын

Very Professional, well done!👍

@Stew_mcandrew Жыл бұрын

Thanks!👊🏻

@markreed1171 Жыл бұрын

Awesome video! Could you please share the brand/type of "silicone" you are using at the end? Thanks!

@craigburkhalter1278 Жыл бұрын

I really appreciate your video. Where do you get your double lip seal and part number please. I can’t find one fully incased like yours. Thanks again

@Stew_mcandrew Жыл бұрын

Thanks! James Gasket 35230-39-DL

@Roolis77 Жыл бұрын

Thanks!! so when using double lip seal you dont need cork anymore?

@Stew_mcandrew Жыл бұрын

You’re Welcome 🤙🏻 We Never Use It With A Double Lip Seal Unless The Case Is Messed Up Where The OD Of The Seal Goes In

@rantsandraves8515 10 ай бұрын

I use a slide hammer with the screw attachment.

@kevinf.trevor8006 Жыл бұрын

What year was the transmission you did video with. I have a 1981 shovel head. Will the double lip seal work in that? Thanx

@Stew_mcandrew Жыл бұрын

Only to 79. Yours would have a different seal and seal runner, you can do the silicone trick though

@franckyptitkoukyharleyshov6579 Жыл бұрын

Good job

@Stew_mcandrew Жыл бұрын

Thanks🤙🏻

@jinxbottleflip1942 Жыл бұрын

I used the screw but a dent puller instead of prying on it

@Stew_mcandrew Жыл бұрын

That works too🤙🏻

@bradwiebelhaus7065 Жыл бұрын

Good video.

@Stew_mcandrew Жыл бұрын

Thanks🤙🏻

@shawnwalden2669 Жыл бұрын

thanks again bro!

@Stew_mcandrew Жыл бұрын

No Problem🤙🏻

@art1317 Жыл бұрын

Where do you get the deep socket to remove the nut?

@Stew_mcandrew Жыл бұрын

Ours is made by Jim’s USA

@thebiggerman6975 Жыл бұрын

How bout the little seal inside where the shaft comes out,thats the one that leaks.the big seal is easy and doesnt leak like the smaller seal ,just sayin

@Stew_mcandrew Жыл бұрын

If so you’ll probably have to change it along with your high gear bushing, premature failure of the high gear seal is usually from the bushing being wore out🤙🏻

@thebiggerman6975 Жыл бұрын

Thanks for your reply Steve,how bout showing us how thats done Regards

@Madness66 10 ай бұрын

Since there is no gasket between the spacer and shaft, wouldn't it make more sense to apply gasket maker/silicone between them as well?

@Stew_mcandrew 10 ай бұрын

You don’t want gasket maker/silicone getting into your bearing if you are talking about applying silicone to the inside surface of the seal runner that goes onto the high gear

@Madness66 10 ай бұрын

The video is great, thanks for responding so quickly.

@Stew_mcandrew 10 ай бұрын

You’re Welcome!

@rantsandraves8515 10 ай бұрын

And I would never drive a seal in like that. The method distorts the seal body that could cause leaks. Use a proper driver or make one.