How to Replace Headlights 2013-2017 Honda Accord

No video

How to Replace Headlights 2013-2017 Honda Accord

Рет қаралды 62,493

Күн бұрын

Buy Now!
New Headlight Set from 1AAuto.com 1aau.to/ia/1ALH...
This video shows you how to install new, quality, TRQ headlight assemblies on your 2013-2017 Honda Accord. Over time, headlight lenses become dull and hazy. You'd be surprised how much that affects your night time visibility! Replacing your headlight assembly is an easy way to improve safety and appearance on your vehicle.
This process should be similar on the following vehicles:
2013 Honda Accord
2014 Honda Accord
2015 Honda Accord
2016 Honda Accord
2017 Honda Accord
Tools you will need:
• Phillips Head Screwdriver 1aau.to/obqL/1A...
• 10mm Socket 1aau.to/obja/1A...
• Ramps
• Trim Tool Set 1aau.to/oahd/1A...
• 3/8 Inch Drive Ratchet 1aau.to/obEa/1A...
• Socket Extensions 1aau.to/obEa/1A...
• Gloves 1aau.to/oam2/1A...
• Safety Glasses 1aau.to/oaeR/1A...
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 40

@TRQ 10 ай бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@TerryTerry1023 3 ай бұрын

After watching this video, I am confident that I better get somebody else to do it.

@martinmuecke2791 9 ай бұрын

Honda decided to make this fun for us. Why would they want it to be easy? lol. Seriously though, this is the best video out there on how to replace my Crosstour headlight. And thank you for including the light alignment piece at the end.

@909real5 9 ай бұрын

Thanks for sensible steps taken for the headlight adjustment. I wish other channels that talk about light bulb replacement stressed how important this is

@mannydigital 10 ай бұрын

I’ll just get a new car Jesus..

@user-nx2qj9jh5v 5 ай бұрын

I followed this to replace mine and it was easy. Thank you!

@chrisdidomizio4958 5 ай бұрын

For people who bought the wrong headlight assemblies where the DRL is a 3 pin vs 2 pin. You can either cut the wires on the harness and the assembly and connect direct or de-pin the connector and find the correct connector which is what Im going to do. You can leave it unplugged for the meantime. Job isn’t that hard. I just let my bumper hang down below.

@TRQ 4 ай бұрын

+@chrisdidomizio4958 Thanks for the feedback! 1aau.to/m/Shop-TRQ

@amgadfahim3556 9 ай бұрын

Really helpful Just did mine last night , there are some extra bumper clips are not mentioned here, but can be done at home

@couchpoet1 5 ай бұрын

Make sure to check that lights are functioning before replacing everything.

@rickyb533 9 ай бұрын

Dude! I just need to replace a burnt headligh, wtf? This sh*ts crazy lol 😮😢

@Chabulawa 10 ай бұрын

Thanks for showing how to do it. What I saw when removing the bumper is to not pull the bumper straight out, you will break the bumper clips. Instead grab a flat srew driver, look closely and Push Down on each black plastics that is holding the bumper clips. And carefully while pushing down the black plastics, remove the bumper as you go.

@TRQ 10 ай бұрын

+ElChabulawa Thanks for watching our video! 1aau.to/m/Shop-TRQ

@ronu8855 6 ай бұрын

Ain’t nobody in God’s green earth going to remove the front panel for a headlight glass replacement.

@mikemavis2989 6 күн бұрын

Ty for this video....omw to the mechanic shop

@diplomat696yt4 9 ай бұрын

No shot I am trying this 😂. Will try one of the kits for the lights first and see how it turns out.

@reginaldharvey9286 Ай бұрын

Thanks for posting this video. I would have not been able to do this without it.

@mtbknox 3 ай бұрын

Thank you very much for this video! Very very helpful. Took us 20 minutes to change out both. Appreciate you!

@Angrypickle5 Ай бұрын

Seems simple enough to me. Idk what all the fuss is about for everyone else, but maybe they expected it to only take 10 minutes lol

@xtimberwolfx13 7 ай бұрын

For those in the comments, this is to replace the entire headlight housing, not a bulb, you can do that without taking off the bumper haha

@Kanker0 5 ай бұрын

This is an excellent vid but not to be confused with headlights that simply burn out. I was a little concerned at first cuz my left light went out and im new to the car game. You can replace the bulbs themselves much easier thankfully

@saladinekinder8161 Ай бұрын

He is a mechanic

@Freddytacvbito 5 ай бұрын

Thank you for saving me alot of money :)

@nataliearice 9 ай бұрын

I’m almost finished but I can’t get the driver side headlight out. It’s stuck up in there. I don’t know what to do. :( there’s nothing keeping it in there it just looks like the bracket is wedged in there.

@Hendo56 Ай бұрын

I used to be able to replace my sealed beam headlights with a screwdriver...

@emilywebb5654 5 ай бұрын

Does it seem doable because a professional is demonstrating or because it truly is that easy….? We shall see! *waits for headlights to arrive*

@SuperSlappy25 2 ай бұрын

Honda making it easy on shade tree crowd

@mikeblue6732 8 ай бұрын

Wow I just did it and thought "there must be an easier way" nope my way was much easier, the hardest part was taking the battery out on the drivers side other than that just reach under the brace and turn. You'll need a small flathead screwdriver or a pocket knife to pop the clip holding it in and done

@gladisonmk8493 3 ай бұрын

Good work . Thank you

@bobbymack44212 6 ай бұрын

I was going to remove the assembly in order to use a restoration kit to get rid of oxidation. I’ll just do it on the car so I don’t have to take a Honda bodywork class at community college.😅