Рет қаралды 18,763
Buy Now!
New Heater Blower Motor with Fan Cage from 1AAuto.com 1aau.to/ia/1AHCX00373
This video shows how to install a new heater blower motor in your 2004-2010 BMW X3. The blower motor, and typically integrated fan, is responsible for blowing the heated or cooled air from your heat or AC system into the cabin of your vehicle. A fan could become noisy if it is broken, or could stop spinning all together.
This process should be similar on the following vehicles:
2004 BMW X3
2005 BMW X3
2006 BMW X3
2007 BMW X3
2008 BMW X3
2009 BMW X3
2010 BMW X3
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• Pry Bar 1aau.to/oa/1AXAA00020
• 19mm Socket 1aau.to/oa/1AXAA00043
• Trim Tool Set 1aau.to/oa/1AXXX00006
• T20 Socket
• T30 Socket
• 1/4 Inch Ratchet 1aau.to/oa/1AXAA00017
• 3/8 Inch Drive Ratchet 1aau.to/oa/1AXAA00015
• Gloves 1aau.to/oa/1AXSS00048
• Safety Glasses 1aau.to/oa/1AXAA00343
• Pick 1aau.to/oa/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.