How to Replace Heater Hose on 370Z Nisssan. Common overheating issues!! Losing Coolant!!

Рет қаралды 4,211

Жыл бұрын

paypal.com/paypalme/avoal
#ad
Pliers Set amzn.to/3UTZFBJ
Impact Driver amzn.to/4buq0vq
10mm Socket amzn.to/3UDGOcH
Hose Clamp Pliers Flex amzn.to/4bzYRr7
14mm Socket amzn.to/4bgtS3w
Pliers amzn.to/4bemIgi
3/8 Ratchet amzn.to/3yj2EuI
Flashlight amzn.to/4ahWsjT

Пікірлер: 10

@jjjjjjjjjart 21 күн бұрын

what size are the hose clamps for the heater core hose you show in this video? mine snapped

@sonchristian 2 ай бұрын

Do you need to bleed the system before changing the bleeder port? Or can I do this install and then bleed it?

@SwazNasty 8 ай бұрын

Man... I cannot fucking get that hose you're talking about around 1:25 off. 3 days I've been at it. I have the hose crimp tool opening it about 75% of the way, (this clamp is cheap and sucks) but it's just loose enough so I figure that's not the issue. I've been yanking on that mf for days now and it just won't come loose. Any tips??

@AudoFixMobile 8 ай бұрын

Bro I struggle with those hoses still. It's such a pain to get some Plier downs there and squeeze those Clamps. If you got the Clamps issue figured out then Most likely the cause for it being still stuck its cuz the rubber seized up. Grab a set of picks that are shaped like a hook at the end 🪝 dig at the end of the hose and work your way around while pulling back on that hose at the same time. Careful not to poke yourself. It's tough. But I'll post a video for you to explain what I mean. But if it's 75% opened I would try harder to open it more and at the same time pull

@SwazNasty 8 ай бұрын

@@AudoFixMobile eventually got it dude thanks. What a pain in the ass!!

@Usef320 19 күн бұрын

did you ever get it off? 8 months later and im having this shi to take care of now 😪

@SwazNasty 18 күн бұрын

@@Usef320I did eventually get it off, took me a while from what I remember but I didn't do anything special no tricks, just kept working at it and eventually it just came off

@luisulloa80 7 ай бұрын

How do I bleed the system

@AudoFixMobile 7 ай бұрын

Fill up your radiator to the top with coolant. But not to where its overfilled. Just enough to see from up top. Start the car and turn on your heater. The heater will blow cold. Let it idle and keep watching your radiator. Fill as needed. Once ac starts blowing hot air all air pockets are out. To speed the process Rev just a bit up to 1500rpms

@sonchristian 2 ай бұрын

Do you need to bleed the system before changing this connector?