How to Replace Intake Manifold Runner Control Motor 2015-2019 Hyundai Sonata

Рет қаралды 39,101

Жыл бұрын

Buy Now!
New Intake Manifold Runner Control Motor from 1AAuto.com 1aau.to/ib/DMEIV00003
This video shows you how to install an intake manifold runner control motor on your 2015-2019 Hyundai Sonata.
This process should be similar on the following vehicles:
2015 Hyundai Sonata
2016 Hyundai Sonata
2017 Hyundai Sonata
2018 Hyundai Sonata
2019 Hyundai Sonata
Tools you will need:
• Phillips Head Screwdriver 1aau.to/oaZR/1AXAA00013
• 10mm Socket 1aau.to/oaKF/1AXAA00017
• 12mm Socket 1aau.to/oa2I/1AXAA00015
• 8mm Socket 1aau.to/oaKF/1AXAA00017
• Trim Tool Set 1aau.to/oUa/1AXXX00006
• Needle nose pliers 1aau.to/oxv/1AXAA00051
• Needle nose pliers 1aau.to/oxv/1AXAA00052
• Gloves 1aau.to/ox3/1AXSS00048
• Safety Glasses 1aau.to/osk/1AXAA00343
• Magnet - Extendable
• Pick 1aau.to/oDK/1AXAA00037
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 33

@TRQ Жыл бұрын

√ Watch the Video √ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts √ Do it Yourself √ Save Money

@user-nt1of4xf8f 18 күн бұрын

This guy is the best 🙏

@derondohanich9232 11 ай бұрын

Thanks for the very instructive video! I was able to replace the control motor on a 2018 Kia Sportage. Everything went well except I dropped the 8mm screw/bolt that goes to the hose bracket never to be seen again.

@TannerFrisby 5 ай бұрын

Thanks for clear and consise instructions. This and your two shock/strut replacement videos has really spruced up my ride.

@nick500ss Жыл бұрын

Thank you for the quality video! I just replaced this on my Girlfriend’s 2016 Kia Sorento and your video made it an easy and quick job!

@ranger2056 10 ай бұрын

Great video my wife's car just had the same problem and I wasn't sure if I was going to be able to fix it myself. You made it look really simple. Thanks

@loganrunitup3401 Жыл бұрын

Yooooo this is smooth my boi never stop 🔥🔥🔥

@eslamabdelkarim5941 Жыл бұрын

Thanks alot bro it was amazing i did it in less than 30 minutes keep going you are the best 🎉

@Qwagmirejade Жыл бұрын

So helpful and informative!!! Thank you! 😊

@georgelujan1924 Жыл бұрын

Awesome walk through instructions Thx

@ClintCheek-s3q 7 күн бұрын

Great video very instructive thanks!!!

@K8Tech Жыл бұрын

Thanks a lot for your efforts

@durvalrebelo2624 11 ай бұрын

Good video, very well explained, I would like to see a video on how to remove the throttle body on a 2015 sonata with a 2.0t engine.

@alejandroespinosa6781 5 ай бұрын

Great video thanks you save me some money

@xxx5014 Жыл бұрын

Made it look easy

@dmtcrz9829 3 ай бұрын

Awsome details....

@DRIZZA23 7 күн бұрын

Does you part come with the arm piece to rhe the motor or do you use the same one?

@user-rg9sn1hs6z Жыл бұрын

After changing the runner, do you have to “re-learn” the ecm?

@jimmyrivera9562 6 ай бұрын

I had P1326 code on my 2018 Kia Sportage. I replaced the VCM and now I'm getting P2017 & P2008 codes. I noticed when you installed the white piece with the clip, you didn't look to see if the indicator goes to the left or right of stop. Can you verify if it matters which side the white tab belongs to?

@m.schetr7398 Ай бұрын

Well did mine on 2020 Kia Sportage with 25,000 miles. But I found when I took it off. The rod was rusted to were it goes on. Had to use pentrenting oil to loosen it. So I could get it off. I had to break it loose just to rotate on the shaft. I'm assuming that what caused the issue with mine. Nice to live in the rust belt.