How to Replace Interior Door Handle 2002 2006 Toyota Camry

Рет қаралды 75,105

2 жыл бұрын

Buy Now!
New Interior Door Handle from 1AAuto.com 1aau.to/ia/1ADHI01076
Interior door handles can take a lot of abuse over the years being pulled on to open and shut doors, or banged up if you load things in and out of your vehicle frequently. In which case, you may have trouble getting in and out of the vehicle! This video shows you how to install a new interior door handle in your 2002-06 Toyota Camry.
• Check here for more videos on the 2002-2006 Toyota Camry • Toyota Camry 2002-2006...
This process should be similar on the following vehicles:
2002 Toyota Camry
2003 Toyota Camry
2004 Toyota Camry
2005 Toyota Camry
2006 Toyota Camry
Tools you will need:
• Flat Blade Screwdriver 1aau.to/oa/1AXAA00013
• Phillips Head Screwdriver 1aau.to/oa/1AXAA00013
• Trim Tool Set 1aau.to/oa/1AXXX00004
• Pick 1aau.to/oa/1AXAA00037
Subscribe: / @trq
Check out our playlist:
Toyota Camry 2002-2006 5th Generation: • Toyota Camry 2002-2006...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 67

@TRQ 2 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Shop-TRQ-Parts √ *Do it Yourself* √ *Save Money*

@pamelawebster851 Жыл бұрын

I’m a 66 year old grandma and did this. The only thing I had a hard time with was the electrical connection-be sure to pull back pretty far so you can connect it. Great tutorial. Thank you!

@frankstear2225 2 жыл бұрын

Mention that having window in down position makes it a bit easier removing/installing door panel

@MrTheatreworks 11 ай бұрын

I'm so grateful for your video...! No extra talk, just the straight goods, and it all worked..! We actually kept pace with you, because we used an electric driver, instead of a manual screwdriver. Mention to your viewers that it can be a bit tricky to get the electrics re-clicked back in, but it worked. ALL GOOD. THANKYOU...! And the handle, from Amazon, was 19 bucks. Job done..!

@sweetcaramelsmile Жыл бұрын

Thank you! Thank you! Thank you! This was a life saver. My son some how had the entire handle broken in pieces. I was tired of rolling the window down to open the door and decided to repair it myself. Your directions were spot on. Especially that part about making sure to pull the lock case back.🙄

@Finesse460 4 ай бұрын

Love this tutorial, super easy and I love how the technician explained it.

@HandwritingHelper 6 ай бұрын

Omg I can’t thank you enough! I thought it was going to be too complicated but your instructions were amazing! Easy rough for a girl to do! 😅

@august31queen 9 ай бұрын

Much appreciated tutorial. Very easy replacement while using this as a reference!

@evila71 18 күн бұрын

Perfect step-by-step walk through. Thanks!

@charlieinsingapore Жыл бұрын

1000% spot on, thank you so much for this. The drivers door handle broke and it will be several days before I can get a replacement. I watched your video twice and in less than 10 minutes removed the interior from both front and rear doors, removed the rear handle, installed it on the drivers door, and replaced both interiors. Thank you again! Especially for the tip about the locking slide on the power window connector. And it appears that the door handle was already broken, and some "mechanic" had "fixed" it by holding it together with a cable tie (zip tie).

@scotts1356 7 ай бұрын

I was able to replace the handle without taking the door apart. I made sure that the correct cable was on the locking part of the assembly. After I put it back together, the door lock will not lock or unlock. It's as those the cable has too much slack. The piece barely moves. The locking mechanism, (plastic part), barely moves, when I try to lock or unlock it. This is the 3rd handle I've ordered and they all do the same thing. What is causing this and how can I fix it? Thanks in advance.

@MarkHarrington-xs8de Жыл бұрын

Excellent vid - direct and no unnecessary stuff. Many thanks

@arturovences8599 9 ай бұрын

Your video was great! I followed it step by step and now the handle is fixed and works just fine. Thanks man.

@channonredfern2535 Жыл бұрын

I successfully installed my new door handle in 15 minutes thanks to your tutorial ☺️ Much appreciation! Thank you 👏🏻

@meohearn Жыл бұрын

This is a great video. Thank you! I now have the confidence to do the job myself. I just received the replacement part tonight, so I do the job in the morning.

@user-ju1cy3be4i Жыл бұрын

video was great, just replaced door handle after viewing this and completed the job in 15 minutes

@tomiossi8092 Жыл бұрын

Just did sons handle. Just followed along. Went well. Thank you

@tonyojeda-lv7qo 10 ай бұрын

Awesome guidance. Walked me right through it. Thanks so much.

@tasel-js2qc Жыл бұрын

thank you for this video. this was VERY helpful!

@luiszelaya6299 10 күн бұрын

I just replaced both my car fronts using this video. It's worth mentioning that most probably the screw caps are going to break. Both mine broke and I just spent $24 at autozone for replacements.

@ianpeden327 Жыл бұрын

Thank you for the very informative video. I was able to complete the repair easily.

@jagstax7746 10 ай бұрын

Anyone help me the door is closed and I can't open it....? Any suggestions?

@bobbaker430 11 ай бұрын

Today i want to the junk yark i bought one and i replace it my self. Thanks o lot.

@michaelfreeman681 2 күн бұрын

Thank you for your expert. I loved the job that you done and I have done it also. Thank you.

@abelluviano8723 Жыл бұрын

very useful video thank you

@Winc3Winc3 Жыл бұрын

I have to do this in a few weeks. Saving this

@joselynflores2158 Жыл бұрын

This is awesome! Thank you !!

@lior9115 Жыл бұрын

My white rod (top) goes half way back n forth , any advice???

@knobbista Жыл бұрын

Followed this video step by step and did not encounter any difficulties. Thank you guys so much and God bless.

@floridanature365 2 жыл бұрын

Thank you this was very useful

@chamogarcia4401 17 сағат бұрын

Thank you bro. That helped a lot .👍

@abelluviano8723 Жыл бұрын

Thank you very helpful

@ceetwyce335 Жыл бұрын

Thank you, thank you, thank you for this video!

@geo6625 7 ай бұрын

I will be trying this tonight. Wish me luck!

@darrellroush1733 2 жыл бұрын

Great video. Thank you 😊

@TRQ 2 жыл бұрын

+Darrell Roush Thanks for watching our video! 1aau.to/m/Shop-TRQ

@jaytcapinpin 7 ай бұрын

Is there a way I can remove the inside door handle without removing the door panel? My door is stuck in the locked position. I am hoping to get to the rods that will unlock the door through the handle. Any information will help. Thanks in advance.

@rammallah3117 Ай бұрын

Perfect video

@Christopher-vt4kq Жыл бұрын

Had trouble putting the connector with the locking mech. It’s a lot easier when you straighten the wires to pull it back further. Looking back at the vid the wires are straight whereas mine were bent 90 degrees.

@charlieinsingapore Жыл бұрын

That's more than likely because someone had put them in with needle-nose pliers without removing the interior door panel. Mine was the same, plus a cable tie holding the broken bits together. Gotta love professionals!

@manifestonkomo7323 2 жыл бұрын

Thank you very much

@146whitegorilla 5 ай бұрын

Thank you!

@skywalkerb6746 Жыл бұрын

This helped a lot, thanks.

@TRQ Жыл бұрын

+Skywalker B Thanks for the feedback! 1aau.to/m/Shop-TRQ

@sportsfan2735 Жыл бұрын

Thank you

@Danosdays Жыл бұрын

Why did this one need replacing?

@commandZee Жыл бұрын

Thanks!

@RKO10S 18 күн бұрын

اشكرك شرح ممتاز بس واجهت مشكله في تركيب الديكور وتوزينه بس 👍🏻👍🏻

@nelsondominguez4922 5 ай бұрын

Buen video muy bien explicado, Una tarea sencilla pero no dañe nada de mi carro ✅

@gracedunn3780 9 ай бұрын

How do I replace the door latch cables to the handle of opening the door on a 2002 Toyota salera please

@TRQ 9 ай бұрын

+Grace Dunn We do not have a video for this repair right now, but we'll keep this request in mind for a future video! 1aau.to/m/Shop-TRQ

@KeAsiaShonteyce 2 жыл бұрын

thank you for this because my handle started to come out it’s self

@Barry-mm9ud 6 ай бұрын

I got the door panel off easily enough, but no matter what I do, I can't get it back on. It seems to fit over the top, but I can't push it into a position where the tabs align with the holes. Any ideas?

@Barry-mm9ud 6 ай бұрын

Ok, here is what I had to do, in case anyone else has the same problem. It was too tight a fit to push the whole thing down at once. Do it with the window rolled down, so you can see what is happening from both sides. Tilt the panel down toward the front of the door, and secure the tab closest to the side mirror over the metal edge of the door it is supposed to fit over. Then push hard against the panel (towards the door frame) as you lower the back end of the panel, making sure each tab in turn fits over the edge of the door. It helps to look down the edge of the door so you can see if the tabs are going over the edge. If you've ever installed a stick of memory into a memory slot on a computer, it's the same idea; don't try push the whole thing in at once, get one end secured in place, and then push it down front to back.

@Nellyslay 10 күн бұрын

U make it look so easy. I need mind to fix. Be fix

@sasino Жыл бұрын

This made me want to return the new door handles I bought 😂

@Riceburner30281 12 күн бұрын

At 37 seconds.. The second screw will be likely be rusty and hard to remove, I had to drill the head off of it just to get it out

@cupcakemaster2 Жыл бұрын

i can’t connect my window breaker to the circut

@2ndsam302 8 ай бұрын

My freaking electrical connector it's hard to put back

@beck645 7 ай бұрын

Nice video but you forgot how important it is to press the water shield back onto its watertight position. You put the door panel back on with the plastic shield hanging loose. Very important to press it back onto the sticky stuff so you have protection from water getting in places you don't want it.

@TRQ 7 ай бұрын

+@beck645 Thanks for the tip! We'll pass this info along to our production team. 1aau.to/m/Shop-TRQ