No video
How to Replace LEAKING AXLE SEALS in a PLASTIC Transaxle - General Transmission RS800 - CRAFTSMAN
Рет қаралды 7,847
Күн бұрынMy Craftsman LTS2000 has a Plastic Transmission. Once I recovered from the shock of that discovery, I set out to replace the leaking axle seals, apparently a common problem. To my surprise, the seal was not just leaking, but had actually become dislodged. I use a little RTV sealant around the outer rim to secure the new seals in place.
Get your axle seals here (paid link): amzn.to/3OUF2PN
Get your Permatex RTV Black Silicone Sealant here (paid link): amzn.to/3R2BCg6
Thanks for watching Buck's Small Engine DIY, Putting the "Do" into "Do-It-Yourself."
@alsouthern7190 2 жыл бұрын
Good job Buck
@tonym6920 2 жыл бұрын
Nice job! 👍👍
@karguy1720 11 ай бұрын
Problems with grease seals falling out of a flexible plastic transaxle housing? What a surprise!
@tomgia1964 3 ай бұрын
I think I would’ve let the RTV dry before I push the seal in. It would’ve formed a gasket type material and would’ve fit tighter because being pushed in like that and wet. It takes a long time.
@pioneerpowered8208 Жыл бұрын
Locktite blue or red would be a better product for the outside of the seal to keep it in... IMO
@Buckwsr Жыл бұрын
Okay, thanks. So far the RTV is holding up fine.
@Grrrnthumb 4 ай бұрын
You do have to replace these seals on a regular basis, maybe as much as even every year or so in some cases, so I would be cautious with what you use in there, because you'll be doing it again soon
@scott-jc5nd 2 жыл бұрын
Great! Well done!
@philliphall5198 Жыл бұрын
I have thought about drilling a tiny hole on top of axle housing and put a screw in to the seal just a tad to keep it in and hold in place. ????? What do you think about it. ?????😊
@vnnynavarro3137 Жыл бұрын
HOW TO PUT MORE GREASE INTO?&WHAT KIND
@coleman3509 2 жыл бұрын
Great video as usual!
@Buckwsr 2 жыл бұрын
Thank you!
@mikereihl9440 4 ай бұрын
How do you fill it back up with fluid? What type does it even take?
@fordfan3179 4 ай бұрын
Hey Buck, any new info on how to service that transmission? Maybe a zirk fitting? I know the trans is like $475 new from Amazon but I hate to just replace it if I can keep it going.
@Buck4388 5 ай бұрын
Poulan pro riding mower can I replace seal or do I have to change whole transaxle
@pawsnazzy01 Жыл бұрын
It looked to me as though there were bolt holes on the end of the axle. was there at one time a cover that held the seals in so they wouldn't come out?
@Grrrnthumb 4 ай бұрын
Nope, that's just the way they are made on the RS800
@fordfan3179 4 ай бұрын
Looks like a good spot for a mechanical seal retainer.
@IRWINPECK Жыл бұрын
How did the sealant hold up?
@Buckwsr Жыл бұрын
It worked perfectly as long as I owned the tractor. Probably still doing a fine job with its new owner.
@philliphall5198 Жыл бұрын
@@BuckwsrI agree on the silicone but I’m going to drill down from top and put a screw just a tad into seal and see what happens I got several of these trans in 20+ old mowers
@BryanPAllen Жыл бұрын
@@Buckwsrhow long did you own it after applying the sealer and was it used often? I have the same problem
@Buckwsr Жыл бұрын
I sold it a few months later, using the tractor once in a while after doing the fix. It was nice and dry as long as I owned it.
@deborahabercrombie9461 Жыл бұрын
recall them plastic junk
@lawrencecarroll2031 2 жыл бұрын
Buck, did u add any grease to the unit before installing new seal? Good video, very informative.
@Buckwsr 2 жыл бұрын
I did not add any because 1) I don't know what fluid/grease it requires, and 2) I'm not aware of any fill plug where more can be added. If you have that info, please let me know. I'm just keeping my fingers crossed that we caught the leak before losing too much fluid.
@lawrencecarroll2031 2 жыл бұрын
@@Buckwsr I do not know where you'd add lube. I would have thought just packing a little more grease into the axle gear container??
@ItsJustBeto Жыл бұрын
@@lawrencecarroll2031 EP 00 grease and best way too add will be through the brake lever.
@luzzija Жыл бұрын
@@ItsJustBetocould you please explain further where to add through brake lever pkease
@Grrrnthumb 4 ай бұрын
@@luzzija There is a how-to on General Transmission's website. Looks like kind of PITA. They say there is lots extra in the unit and you shouldn't need to add more, but I'm with Buck, I would maybe try packing a little extra in as you set the seals, especially since he blew it all out with brake cleaner.
@richardsilva5134 5 ай бұрын
Can anyone provide me the link to the seals or seal number? I did not see it in the video attached
@Buckwsr 5 ай бұрын
I put a link in the video description to buy the seals on amazon. If you use that link, I'll earn a small commission. Thanks.
@shawnpowell4951 11 ай бұрын
Before you put the new seal and all you gotta do is shoot some grease in there that’s all that’s in that transmission
@Buckwsr 11 ай бұрын
It's not just basic grease, as I explain in the video.....
@Trump-sd2ds 3 ай бұрын
What kind of grease does it take? Oil?
@charlesgray3810 2 жыл бұрын
Common sense you don't put plastic on a trans Axsils they got hot and melt.
@superswire Жыл бұрын
It's not "plastic" it's a high strength temperature resistant reinforced polymer.
@charlesgray3810 2 жыл бұрын
They need to stop putting cheap parts on a mower again plastic does not hold up to heat.
Chickanic
Рет қаралды 257 М.
Jeff's Little Engine Service
Рет қаралды 259 М.