No video
How to Replace Motor Mounts in Your Car
Рет қаралды 974,752
Күн бұрынMotor mount replacement. How to replace broken motor mounts in your car, DIY with Scotty Kilmer. If your engine clunks when you put it into gear, that usually means bad motor mounts. Engine motor mounts location, inspection, removal and repair. DIY car repair with Scotty Kilmer, an auto mechanic for the last 46 years.
⬇️Things I used in this video:
1. Ratchet and socket set: amzn.to/2inoxOY
2. Mechanic’s Tool Set: amzn.to/2Bzmccg
3. Steel Jack: amzn.to/2Asgjxo
4. Jack Stand: amzn.to/2jGOwBg
5. Disposable Gloves: amzn.to/2zSRuxO
6. Common Sense
7. Full HD Camera: amzn.to/2AvoEk7
8. My computer for editing / uploading: amzn.to/2i2sKYz
9. Video editing software: amzn.to/2jv5Fhf
10. Thumbnail software: amzn.to/2k7tz6C
🛠Check out my Garage to see what I use every day and highly recommend:
www.amazon.com...
❗️Check out the Scotty store:
goo.gl/RwhRGU
👉Follow me on Instagram for the latest news, funnies, and exclusive info / pics:
goo.gl/ohy2cA
If you liked this video, consider subscribing and press the bell Icon to get updated on the latest videos every week.
And remember, every day (7 days a week), I upload a new video on the Scotty Kilmer Channel: / scottykilmer
Also, if you like my car help, be sure to watch my live car talk show, every Thursday afternoon at 1 CST and Saturday morning at 10 AM CST on KZfaq. I answer your car questions LIVE there. Just check it out at: • Video
Scotty Kilmer is a participant in the Amazon Influencer Program.
#savagescotty
@scottykilmer 6 жыл бұрын
Things I used in this video: 1. Ratchet and socket set: amzn.to/2inoxOY 2. Mechanic’s Tool Set: amzn.to/2Bzmccg 3. Steel Jack: amzn.to/2Asgjxo 4. Jack Stand: amzn.to/2jGOwBg 5. Disposable Gloves: amzn.to/2zSRuxO 6. Common Sense 7. Full HD Camera: amzn.to/2AvoEk7 8. My computer for editing / uploading: amzn.to/2i2sKYz 9. Video editing software: amzn.to/2jv5Fhf 10. Thumbnail software: amzn.to/2k7tz6C 🛠Check out my Garage to see what I use every day and highly recommend: www.amazon.com/shop/scottykilmer ❗️Check out the Scotty store: goo.gl/RwhRGU 👉Follow me on Instagram for the latest news, funnies, and exclusive info / pics: goo.gl/ohy2cA
@clestonskyland820 6 жыл бұрын
Scotty Kilmer see
@clestonskyland820 6 жыл бұрын
Scotty Kilmer Sew
@clestonskyland820 6 жыл бұрын
Scotty Kilmer seewtpussy
@madarauchiha1501 5 жыл бұрын
Scotty Kilmer where can I buy the common sense
@great4ever845 5 жыл бұрын
What about in a manual ?
@eliezerr.johnson9644 4 жыл бұрын
Scotty never disappoints when it comes to making tutorial videos with the easiest fix. Seriously, it took me twice as long as Scotty's replacement time to just locate my motor mounts.
@UR1Finegrl 10 жыл бұрын
Boy do I ever wish to God I had seen this video a few months back. My sister rode around with bad motor mounts for forever because she couldn't afford to have a mechanic fix them. You make it look so easy. I love your channel. I've shared your videos with my dad. You make everything very easy to understand. Not many people can explain things especially when it comes to cars that the average person. I truly appreciate your channel and I love that you engage with your audience. So this is just a big thank you from a fan. I have a 2009 Mustang V6 and I discovered you when I needed to replace the crankshaft pulley on my car. Thank you for all of your informative videos. I love to learn how to do things myself.
@squidboy0769 10 жыл бұрын
I've never seen motor mounts so easily accessible.
@zachariahlloyd6043 4 жыл бұрын
*Truth* Almost everything on my Hyundai is a *PIG* to even reach, let alone just undo a few bolts and remove....
@normellow 3 жыл бұрын
@@zachariahlloyd6043 like those damn spark plugs
@danielgallardo6125 3 жыл бұрын
You should see the Honda design lmao
@Campoeats 3 жыл бұрын
Check the corvairs
@jaydendelaney4276 3 жыл бұрын
Try a bottom motor mount a G37x…. Impossible
@jamesfrench7299 6 жыл бұрын
I did my first engine mount (front one) a few years ago. Believe me, it doesn't take half hour like this video implies, it took me four hours or so. I had to partially remove the sway bar as well. I couldn't believe all the tools I had out for doing this seemingly straightforward job. I had to grind the edges of the replacement mount assembly to get it to fit in. I certainly felt a sense of accomplishment but wow, I hate to think what a more involved job would entail. That is why I am happier to pay a mechanic who knows what he is doing. I might take on more work again, just for the experience.
@djaaron2426 6 жыл бұрын
Scotty makes everything look so easy...
@djxsquizit 5 жыл бұрын
Indeed
@notroll1279 5 жыл бұрын
Before actually doing this on any "real" car, I'd look for a KZfaq vid showing how it's done with that particular type because every model has different stuff in the way and different ways of removing it. But hey, there's a lot of videos around - even for models that weren't built terribly often, so it's a good idea to encourage people to do their homework and then go for it.
@chukob5 4 жыл бұрын
Everything was good until he put the jack under the oil pan.. I understand he’s not lifting the car but that metal is pretty thin and easy to dent
@HAL-dm1eh 5 жыл бұрын
I want to buy that engineer a beer.
@tanertekin763 6 жыл бұрын
My god, he does the stuff in a way that you think it's a piece of cake, gives me quite of confidence to do things myself. Thanks Scotty,
@scottykilmer 10 жыл бұрын
Yes, another new Scotty video is up. Learn how to replace broken motor mounts yourself.
@megatron804 10 жыл бұрын
another great video,u should run for president scotty!!!
@rebeltake 9 жыл бұрын
Hey Scotty I have 2000 Mitsubishi eclipse and I'm getting a lot of vibration when I switch Gears and my revs are Around 3k-7k, do you think it's the motor mounts or the front Drive shafts ?
@MADMAX-tv8su 8 жыл бұрын
glow__up Jason depends on how many km you have on the dash 100,000km it is your original drive shaft that has a problem its the bearing The one that looks like a + Scotty has a new video for it.
@shawns.2851 8 жыл бұрын
Because he wants to???
@joecline3509 7 жыл бұрын
thanx scotty! hope this is easy on a 98 cvpi....could use some news ones for sure.
@diamondharris4963 6 жыл бұрын
Put a piece of wood under your jack you can damage your engine and lifting it by the oil pan is a bad idea
@Roger-ob2ft 5 жыл бұрын
I've seen over a dozen video guide where they left it by the oil pan though..
@LawrenceFadalong 4 жыл бұрын
I use a hockey puck.
@Agent77X 4 жыл бұрын
It works, so do it like Scotty does it, under the oil pan! You should technically find a sold place the manufacturer designates for lifting but what the f*ck huh!
@paulf1071 4 жыл бұрын
Ambiguous User Bad idea, especially if it's an aluminium sump.
@Billy_W 4 жыл бұрын
Paul F the engine has to be held up somehow, he’s not trying to lift the front end up just hold the engine in place
@Duel53 8 жыл бұрын
I promise that this channel is one of the best in terms of car mechanics.
@ericalcazar6137 6 жыл бұрын
I can tell this man is a very experienced mechanic. He knows a lot about fixing and repairing cars
@glocktown21 8 жыл бұрын
Scotty, You make this look too EASY! Awesome video... Thanks for the crash course on mounts.
@pnotic7416 3 жыл бұрын
Scotty makes it look so easy! I thought mount replacement would be a huge job!
@lilpackerfann4 3 жыл бұрын
I love your videos, man... You make these instructables a lot of fun to watch. Thanks for blessing KZfaq and my brain with your knowledge
@MrgoodLooking1000 7 жыл бұрын
You make it seem so easy! I don't know much about cars so these videos are more for the advanced to know how to remove parts that are in the way of mounts :(
@jonquintero8668 8 жыл бұрын
I love this guy. He has saved me so much money.
@irlGlitches 9 жыл бұрын
You're weird and informative. I like you.
@soviet_genetics 9 жыл бұрын
the guy is hilarious :D
@bellyanchor138 5 жыл бұрын
I'm not entirely certain that he means to be as funny as he is but it certainly doesn't hurt his brand
@BRIANnj1 4 жыл бұрын
he isnt weird hes very smart and to the point
@NeuroPulse 2 жыл бұрын
Scotty Kilmer knows EVERYTHING!!!
@lorraine5558 4 жыл бұрын
Your videos always make me feel like I can take apart my car and replace parts like no big deal
@wayneneva1 4 жыл бұрын
This guy makes it look easy. I think I can attempt this job. Thanks.
@canaldoectomorfobarrigudo 3 жыл бұрын
This is the video that gave me the confidence to do this job.
@gereral1_jackofalltrades 10 жыл бұрын
Quick and to the point. A block of wood would be better for the oil pan when holding the engine with a jack.
@lukemartin7029 10 жыл бұрын
Sweet job Scotty. I wasn't sure how hard this was to do or what the symptoms of worn motor mounts were. Thanks a lot!!
@professorjack2099 4 жыл бұрын
IF ONLY IT WERE REALLY THAT EASY! :D
@ncrdisabled 10 жыл бұрын
I seen the tornado and reminded me of back in 71 April 3 . Even after spending 7 years on submarines that was the not the scarcest time. I was in the park in Louisville Ky at 3 pm and fishing in a creak . I was 10 and looked up green sky and a huge tornado heading my way . Lucky I was near a 20 foot tall and wide storm drain system that went back 2 miles . There was a ladder inside about 1/4 mile . Since I have been in it during heavy rains and it would clear up in a few minutes. I climbed up the ladder and looked out seen the tornado go by and it had 3 cars in it and a lot of trees. 1/2 hour later I got out and almost all the trees were gone . Even to all these years later the park is still not the same . I went back home 1/3 of home was gone lucky we had a tornado shelter in the basement. There was a apartment complex down the street was gone 132 folks died. I now live in the Catskills NY area for over 20 years only 1 mid sized tornado in all the time.
@jose2bee2 8 жыл бұрын
Great video, Scotty. Ive got a 1999 mazda 626 4-cylinder automatic transmission. Had to do transmission service because if a a case leak. Transmission has been rebuilt. Engine is great, does need a tune up, but after the car has been warmed up and when i change gears from park or neutral to reverse it thumps or clunks. Only going from a quick visual inspection the mechanic has said it is not the engine mount. With your video, along with other videos that have shown the same clunk or thump effect, i do suspect the motor mount(s) have worn out. Only had the front replaced, getting the rear replaced. Should ask mechanic to replace the first transmission mount thats under the battery and airbox. He did replace the one in front, by the radiator. It looks different than the one recommended in a auto parts store photo print out. Thanks again for the educating experience. Appreciate your time you take in making these videos.
@scottykilmer 8 жыл бұрын
+jose2bee2 replace all the motor and transmissionmouts first, then pray he didn't do a crap job on the tranny rebuild
@jose2bee2 8 жыл бұрын
+Scotty Kilmer -interesting you should say that. He is going to to have to replace the transmission. We paid for him to rebuild it. He said the mounts were good. Id still say he should he put in new transmission mounts.
@dalambert4090 9 жыл бұрын
This guy makes it look easy to replace engine mounts
@farerse 10 жыл бұрын
i wanted to see the difference in the engine bay after you changed the mounts..
@M09W41 10 жыл бұрын
That's the only thing that disappointed me about this video as well.
@livewireOrourke 6 жыл бұрын
He had a tornado to run from.
@hawks911bb 5 жыл бұрын
Yeah no bullshit I was waiting as well
@robomatt1600 5 жыл бұрын
I just had mine replaced. Less clunking, but the engine still tilts a few degrees when I shift to drive
@jopisano67 5 жыл бұрын
@@robomatt1600 How long did the old ones last ? I guess it all depends on your driving habits. I put new ones on about 8 or 9 years now and I dont have any problems. Ones before that lasted almost 15 years before needing replacement.
@PietervanDriel1 8 жыл бұрын
"As soon as this tornado passes over!!" LOL!!! haha
@shaggysmurf4422 Жыл бұрын
Scotty saving the day 8 years later!!! I got the wrong mount because the system had it marked incorrect. Didn't notice until I took out the old one out. The first one I bought came with the bracket welded to the mount, and it was smaller and holes didn't line up at all. I needed one like this, where you keep the original bracket, and just get the cylinder. That bottom nut was tough, 15/16 inch, it's....nuts. Jobs is almost done. Hoping the vibration and cluncking is fixed.
@ParadoxdesignsOrg 10 жыл бұрын
I had no idea it was so easy to do. good vid Scotty!
@azmah46 8 жыл бұрын
i hope the oil pan is not damaged when we put the weight of engine on it because some cars have really soft oil pans
@kryptonek88 9 жыл бұрын
Hey Scotty, first of all i wanna say im a huge fan. Ive never done any work on my car but thanks to your videos ive been well informed and know what to look for when i go to my mechanic. My 2000 Impala had a worst case of broken engine mounts. I replaced the two top engine mounts (3.8L V6) but i still get some vibration. One of the top engine mounts had been broken for at least two to three years and never replaced until i put my hands on the vehicle. Do you think there is permanent damage done to the engine? Or if i replace the two bottom mounts the vibration will completely stop? Im really worried, i dont wanna sell my car but i dont want to invest all my money in it. What do you recommend?
@scottykilmer 9 жыл бұрын
+kryptonek88 change the rest of the mounts, it should go away
@fpeverini 6 жыл бұрын
Like the quick and to the point explanation. Really help thanks!
@LuvHawaii 9 жыл бұрын
omg.....I love how fast u work.....where have u been all my life.....lol....why does it take forever for other mechanic's to fix vehicles.
@Johny40Se7en 10 жыл бұрын
Thanks a lot. The end sounds like bloody Silent Hill =P
@christophercredit 8 жыл бұрын
Found a bad tranny mount on my 2000 Chevy Impala 3.4 (218k+mi.); maybe (probably) motor mount too. Thanks Scotty, you make it look like falling off a log.
@operatorblack 2 ай бұрын
Doing this on my 2012 rav4 v6 4WD with confidence now thanks to this video
@peazfrog78 9 жыл бұрын
You've saved me thousands in labor! Keep up the great work Scotty!
@orfeas92 8 жыл бұрын
Hallo Scotty! Keep going with these usefull videos!! Is it a good idea to put silicone spray on engine mounts and on rubber parts generally in order to prolong their life and prevent the cracks? I also put spray silicon also on my scooter' s fork (for dust seals) Is this a good idea? It will be a good idea to upload some videos for motorbike maintance! Thank you, greetings from Greece!!
@scottykilmer 8 жыл бұрын
yes good idea
@Slooby Жыл бұрын
So I can cry about mechanics charging $500 per mount or I can go spend $100 on a decent jack and $50 per mount and do it myself for a fifth of the cost in a tenth of the time?
@saidsaleh7421 5 жыл бұрын
Thanks Scotty, I've learned a lot through your videos.
@ProjectArjun 4 жыл бұрын
Scotty hasn't aged. I'm watching this in 2020. Haha
@TheToolnut 8 ай бұрын
Don't use your oil sump as a jacking point.
@mackcummy4976 9 жыл бұрын
No wood between the jack and oil pan?
@mackcummy4976 7 жыл бұрын
I'm just a bit fussy and anal
@acemak14721 4 жыл бұрын
mack cummy better safe...
@Rangielad 11 ай бұрын
Thank you for this Scotty, I had to replace the engine mounts on the exact same model Ford Focus and your guide made it a breeze!
@aderfigueroa 6 жыл бұрын
Good job Scotty, it took me 2 hours to replace the Engine mounts on my Element, i saved $200 of Labor they were going to charge me.
@antwayanowens5529 4 жыл бұрын
Wow I have a 2004 element Firestone auto charging me 800 bucks I'm not mechanically incline at all I wish I was iwudev done it myself if its that easy the guy told me its gonna take him roughly 3hours I'm 👍 OK I get it your out to screw me when it shuden take dem no longer than a hour
@Chi_Confidence 7 жыл бұрын
@scotty kilmer you're the F****n Man!!!!!!!!!!
@dahorn100011 10 жыл бұрын
When jacking off the sump (oil pan) wouldn't it be wise to put a block of wood to support the engine as to not leave dents in it?
@richwebber5275 10 жыл бұрын
Im pretty sure that after 46 years scotty knows what hes doing.
@dahorn100011 10 жыл бұрын
Engines are heavy, sumps usually aren't made out of the hardest metal
@Bunkers101 10 жыл бұрын
richard webber You never jack a car up by the oil pan, even if you aren't lifting the whole car. =/ I'm sure he knows what hes doing, but that's just wrong. If its like a norm pan it will bend up, if its cast, it will crack.
@RetroGameTech 10 жыл бұрын
Bunkers101 To be fair he's not jacking the car up. He's only supporting the motor while replacing one mount at a time. The whole weight of the engine is never being placed on the oil pan. Maybe 1/3 at most. Personally I don't see any issue with what Scotty did here. How else would you suggest a DIY mechanic support an engine while changing mounts? I agree some wood between the jack and sump is a good idea it you're worried about scratches/dings. Personally I wouldn't bother.
@KenmareVintageVehicles 10 жыл бұрын
I think you meant "jacking up"......
@welcometoreality3450 4 жыл бұрын
What do you think about filling motor mount holes with polyeurothane to make them more solid? I recommend getting new mounts then do it.
@713seand 8 жыл бұрын
Mr Scotty always make it look easier be careful before approaching this project.
@mexicanmuscle8594 8 жыл бұрын
who would dislike these videos?
@rangerrick1859 7 жыл бұрын
some people don't like it when he's yelling at the camera
@jessekoch2254 6 жыл бұрын
Mexican Muscles
@nickstawczyk4749 8 жыл бұрын
You really shouldn't jack up on the oil pan
@tylerclark5086 8 жыл бұрын
That's what I was thinking
@snakesolid6823 7 жыл бұрын
then where should i jack up ? i planning to change my motor mounts ..
@scottykilmer 7 жыл бұрын
you use a jack and a piece of wood and gently jack the oil pan, or you use a cherry picker engine hoist to lift the engine up
@loves2smooch384 6 жыл бұрын
Scotty has been doing this for decades , you just watched a Chris Fix video and think you're a pro now.
@pyroboy1080service 6 жыл бұрын
Manufacturers actually state that you shouldn't use a jack under the oil pan to lift the car.
@CarlosGonzalez-ui4sk 3 жыл бұрын
That oil pan is strong 💪
@JG-zu4yp 13 күн бұрын
It is so strong that you can pierce it with a stone or a piece of ice. I don't understand how you can use oil pan for the engine support!?
@RileyJSW 6 жыл бұрын
Love the fast paced video making!!
@toddbob55 6 жыл бұрын
Aftermarket motor mounts are garbage....buy OEM
@greencrocidile6246 5 жыл бұрын
Where can i get oem besides the dealer
@shadowc6103 8 жыл бұрын
please don't put your jack on your transmission pan lol you're begging for trouble
@kaeosfactory 8 жыл бұрын
or the engine oil pan.. it should be placed on a solid or sitting point designed to hold weight.
@3m0k1d4evr 8 жыл бұрын
With a block of wood, it's usually pretty safe.
@crzzymnn911 7 жыл бұрын
Exactly, I've done it countless times without issue.
@Miggys.Garage 7 жыл бұрын
I'm assuming you guys all did it with a steel pan? ^
@automan224 7 жыл бұрын
Ralph Livingston is that why my cars Oil Pan says "lift engine with wood block"
@Blueice81 4 жыл бұрын
Wish he would make a simple directory of all his videos that you can search command keywords such as "motor clunking when shifting" on a website or something. That way it'll show a list of his youtube videos where you can have an easier time. Been trying to figure out what was wrong with my car. XD Load and behold you tube's recommendation did not fail me this one time. As soon as he said "Does your motor clunk when shifting" I was like No Way!
@ColdBrew90 10 жыл бұрын
You make me want to search for tornado videos now xD
@scottykilmer 10 жыл бұрын
If you like my car help, be sure to watch my live car talk show every Saturday morning at 10 AM CST on KZfaq. I answer your car questions LIVE there. Just check it out at How To Ask A Live Mechanic Car Questions Free On KZfaq . And remember, every TUESDAY I upload a new video, so don’t miss them.
@Joi2049 5 жыл бұрын
This is super helpful and speedy. Iike that. Hate videos that take forever to get to the point. I'm in a rush here !
@natenewberry6660 4 жыл бұрын
this guy is a character. I LIKE IT!!!!
@IcemanSam650 10 жыл бұрын
New car?? Looking good SCOTTY!
@JoseMartinez-bs8oi 10 жыл бұрын
Your awesome! I like how your videos get to the point and are full of advice. Good example is the P0171 vacuum leak video with the cigar.
@zolarien 10 жыл бұрын
Scotty I love you, You have helped me Dozens of times with my car !!! Thank you!!!
@Blade548 6 жыл бұрын
I changed the passenger side mount today and it's fine to support the engine by the oil pan as lons as you use a wooden block. I was scarred but in the end everything was ok. Just lift the rear wheels to make it easier to remove the oil pan protector and support the motor near the oil pan board but not on it. To change the trans mount support it by the transmission. Thank you.
@thebestofall007 9 жыл бұрын
Changing mounts isn't too hard, unless the brackets or the bolts that hold the mounts/brackets are broken and in a hard to reach place way in the back of the engine and you have to weld onto them to fix them (so they don't do that again!). I had two of them with that problem, one where a bolt head busted through the bracket holding the mount (I had to have a thick washer welded onto where the bracket broke) and the other bolt holding the bracket busted off and I had to use a lefty drill bit and easy-out to remove, and the other mount where the bolt holes on the mount itself broke through. The odd thing is the rubbers on those two mounts were good. The other two mounts had the usual broken rubber.
@fredflintstone3956 8 жыл бұрын
May I make a suggestion? While KZfaq is great for having a lot of these 'how to' videos, it gets VERY frustrating when you need something specific, and all these videos have generic titles. Since so many vehicles are different year to year, and model to model, even within the same manufacturer, "How to replace a Motor Mount or Transmission Mount" really doesn't tell me anything. "Replacing a motor/transmission mount, Ford/GM/Toyota?Hyundai, etc 02-09" would tell us everything we need. Yours is a very informative video, but I don't have a Ford van.For those who do, this is the video they need. I have a 1997 Cadillac Eldorado, which is specifically what I searched for, so why am i here? Because there's a whole list with the same generic title you used, and I have to look through every one of them to find what I need. Thanks.
@rrrandommman 6 жыл бұрын
You make it so easy Scotty. And those endings are so cute haha.
@alexism.7712 4 жыл бұрын
😭😂 Tornado, thanks that was straight to the point. Shops charge over $200 just to do this, smh.
@EdmondCharrette 10 жыл бұрын
you made this video at the perfect time Scotty! thanks. I am not getting any clunking noise but if I shift (manual transmission) and hit the gas I will sometimes get some jerking, sometimes it is really bad. It is a 1998 nissan frontier 2.4 manual with the origional mounts 100k miles. Would new mounts be stiffer? Thanks and keep doing what you are doing! I enjoy the videos. The other youtube mechanics turn a simple job into a 50 minute video.
@Shortstacksandticktacks 3 жыл бұрын
First Texas Honda in Austin Texas told me my "transmission was going bad". Took it to a mechanic and he said it was the engine mounts starting to wear out, but I could wait on it, no problem with transmission.
@burritoloco4685 2 жыл бұрын
Scottys grunts are hilarious
@Hakimfarhat 5 жыл бұрын
This guy is amazing I follow you from Libya God bless you
@TheMilwaukeeMark 9 жыл бұрын
Hey Scotty, is it a good idea to jack the motor up using the oil pan ? Sounds like it could be bad news. Or is it perfectly fine ? Would putting a piece of wood between the jack and oil pan to distribute the force/weight be better? I have a '98 Acura CL that's gotta get done.
@trevorchan9014 4 жыл бұрын
That was by far his most simplistic fix
@Cockerham 9 жыл бұрын
Great video editing! A joy to watch these.
@mackcummy4976 9 жыл бұрын
I have a mount with a severely ripped bushing and my front one has a small rip but I was thinking of filling the gaps in that one with polyurethane caulking. It would also help reduce my engine movement too as I have a turbo and more torque than stock.
@derekmederick1110 2 жыл бұрын
That ending was surprisingly frightening hahaha
@200twistatwista 10 жыл бұрын
Good clip and easy straight foward.
@rollandredland 4 ай бұрын
Hope you're doing good sir. Always coming back.
@MineTwine45 10 жыл бұрын
I have the same Focus lol... Color, motor, and everything. The motor mounts on the Zetec engines have been known to go bad like the thermostat housing.
@mosesmkuki5308 4 жыл бұрын
I love you Man. . .... I learn a lot through this channel... Scotty the animal SIMBA
@jimstools3937 8 жыл бұрын
Scotty , you are the best mechanic I've ever seen I have a 2006 mercury Milan 6cyl. Is it the same way to fix it ? This person called it a dog bone. I hope you get back to me doc.
@MonkeyDLuffy-ef2yh 8 жыл бұрын
dog bone mounts, or torque strut mounts, if its like mine - on the top in plain view- can be replaced without jacking it up. just remove the 2 bolts, remove and replace mount, install the 2 bolts tight and voila.
@mattfoley6082 3 жыл бұрын
Scotty, what's your opinion on repairing the rubber with roof caulk or similar? Other videos show this but they don't say how long the repair lasts.
@anthonymartinez2318 5 жыл бұрын
Scotty is a genius
@gregl6668 7 ай бұрын
Your the man Scotty 💪🏼💯
@ThePeepsMaster 9 жыл бұрын
I really enjoy the enthusiasm! Makes for an entertaining video, hence a thumbs up!
@raopsepol 3 жыл бұрын
i love that those have notches so you can only put it in one orientation. one of mine was symmetrical so lots of users with the same car complained why it broken too fast. :(
@sebseb86 9 ай бұрын
Remember about wright tightening torque of the screws when replacing parts in your car. In my car Espace 4, tightening torque are from 21Nm one screws to 190Nm the other! It is safety matters. Check your book.
@YouYa01- 4 жыл бұрын
Can you please do a video on how to change a motor mount in a 2012 Dodge Avenger r/t!? Because the technician said it’s going to cost me over 1k to fix it and would like to do it myself if you can please do a video on it! Thanks Scotty !
@Radiccus 10 жыл бұрын
Hey Scotty, Love the videos. Was wondering if you could shed some light on a few different problems. 1990 f150 xlt -Dies at idle if AC is on, stays running if AC is off -Heater does not get hot, AC blows cold as ice -Some light smoke out of exhaust after driving for more than 15 minutes, and only seems to happen when accelerating past 65 mph
@scottykilmer 10 жыл бұрын
I would assume head gasket is starting to go, do my test "how to tell if your head gasket is blown" and if it is, that could do it all.
@canemanjd 6 жыл бұрын
Scotty you're the man! Any advice on replacing the left front mount on a 2011 Dodge Durango 3.6 AWD? The dealership says they have to remove the AWD to do this and it'll take 10 hours and 1250 bucks!! Hoping to tackle this myself
@A7XFANFOREVER 4 жыл бұрын
Hi Scotty, thanks for theg great videos, i always learn alot. I have a 2003 Corolla and it is clunking from parking to reverse and from drive to reverse, are the side mounts the only problem?, do the front and back mounts also cause the clunking?
@miguelgutierrez110 4 жыл бұрын
Thank you scotty You’re the best 👍🏻
@pedrof830 10 жыл бұрын
I made the big mistake of getting after market, Mickey Mouse mounts for my Corolla and it was like installing hockey pucks in there, stiff like a go-cart and then just as quickly they began to shake and vibrate like a lawn mower
@passion830217 10 жыл бұрын
great! if i watched your videos earlier, i should have replaced motor mounts in my car.
@palestinianM16 4 жыл бұрын
Scotty you make it look so easy
@jonhohensee3258 3 жыл бұрын
He makes it look so easy.
@miriamfernandez7985 4 жыл бұрын
This guy is amazingly good.