How to Replace PCV Valve 11-12 Ford Escape

No video

How to Replace PCV Valve 11-12 Ford Escape

Рет қаралды 47,509

1A Auto: Repair Tips & Secrets Only Mechanics Know

5 жыл бұрын

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/136/e...
In this video, 1A Auto shows you how to repair, install, fix, change or replace a failing, worn out, or defective PCV valve. This video is applicable to the 11 or 12 Ford Escape
This repair was done on a 2012 Ford Escape XLT 3.0L and the process should be similar on the following vehicles:
2008 Ford Escape
2009 Ford Escape
2010 Ford Escape
2011 Ford Escape
2012 Ford Escape
🔧 List of tools used:
• Hose Clamp Pliers 1aau.to/odL/1AX...
• Engine Oil
Subscribe: / @1aauto
Check out our playlist:
Ford Escape 2008-2012 2nd Gen: • Ford Escape 2008-2012 ...
Ford Auto Repair Videos: • Ford Auto Repair Videos
For More Info visit us at 1aau.to/h/bt8/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 18

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@haythamabdel-qader6934 5 жыл бұрын

try doing this in the dark without removing the intake manifold using only needle nose pliers. so much fun.

@karlagracia1724 Жыл бұрын

Do you have a vid for the 2012 Escape XLT 4 cy engine? The 4 cylinder version does not have much in the area where this vid shows a PCV on the 6 cy.

@thepirate5955 Жыл бұрын

Most excellent, thanks! TIP: For turning or twisting motion description, it is more accurate to state clockwise or counter-clockwise . . . not left or right.

@jacobs7281 8 ай бұрын

i have a 2012 ford escape 3.0l v6. when i removed the rear pcv valve connector i noticed that there is no pins in the green connector on valve cover. all these days the connector was plugged in with no electrical connection?. I am confused.Please help

@MahmoodSuhail 4 жыл бұрын

Thanks for the video, actually Jaguar x type has the same PCV base as its engine is made by Ford which the majority of people don't know how to take off

@RickyPisano 3 жыл бұрын

The engineers that designed this sideways V-6 should be sent to the 5th ring of hell and forced to remove the valve cover on Bank 1 for ETERNITY. What a pain in the ass engine. I've got the 2005 3.0L Duratec DOHC V-6. A real doozy.

@Francois_Dupont 2 жыл бұрын

i got a Tribute (same thing) 2009 3l, both rear side strut tower completely gone, alternator, worn spark plug that almost killed my computer and not the exhaust pipe.

@sjcalsbm3 Жыл бұрын

Do you have a video for a 5th Gen Explorer?

@124marsh 2 жыл бұрын

Is this the same as well for the 4 cyl.

@caseyculver3908 4 жыл бұрын

Thank y'all so much for posting these. Is the process the same for the 2009 Escape? It looks similar

@Shanonmcnab576 Жыл бұрын

Was the video similar to the 2009 Ford Escape when you took yours off?

@salehdides8650 4 жыл бұрын

hi please where is the pcv volve in ford focus 2012 not se

@Tmhen 4 жыл бұрын

For $62 ???!!! Autozone for $5.49

@deriklfixit 4 жыл бұрын

Its probably the wrong one without the wire connector and/or the wrong wire connector.

@GregSchmidt83 4 жыл бұрын

i think it depends if you get a heated vs non-heated PCV. I'm still looking into it though.

@reedsyd 4 жыл бұрын

Autozone one is not the same, it does not have the 2 prong connector

@johngates450 2 жыл бұрын

The one from Autozone isn't the sane one. It has no connector to the 2 prong connector. I made the same mistake myself. The guy from Autozone unknowingly sold me the cheaper one. I brought it back as it wasn't used and bought the right one online for roughly 25 bucks. Was interesting even there computer screen showed the wrong one. A bit of a pain to remove and replace but it hadn't been replaced ..Had 120k on it. Yes it made a difference along with changing the plugs. Wires and the Pcv valve.