How to Replace Pinion Bearings 09-14 Ford F150

Рет қаралды 151,469

1A Auto: Repair Tips & Secrets Only Mechanics Know

Күн бұрын

Shop for New Auto Parts at 1AAuto.com 1aau.to/c/30/y/4wd-parts
In this video, 1A Auto shows you how to replace the pinion bearings. This video applies to the 09, 10, 11, 12, 13, 14 Ford F150
This process should be similar on the following vehicles:
2009 Ford F150 Truck
2010 Ford F150 Truck
2011 Ford F150 Truck
2012 Ford F150 Truck
2013 Ford F150 Truck
2014 Ford F150 Truck
🔧 List of tools used:
• Flat Blade Screwdriver 1aau.to/oqd/1AXAA00013
• Pry Bar 1aau.to/oes/1AXAA00020
• 10mm Wrench 1aau.to/oem/1AXAA00010
• 12mm 12-Point Socket
• 12mm Socket 1aau.to/oqa/1AXAA00015
• 21mm Socket 1aau.to/og8/1AXAA00043
• Bearing Separator
• Brake Caliper Hanger 1aau.to/oac/1AXAA00084
• Harmonic Balancer Puller 1aau.to/oh/1AEHB00094
• Press
• Torque Angle Gauge
• 3/8 Inch Air Impact Gun
• Air Chisel 1aau.to/on/1AXAA00270
• 1/18ths Socket
• 1/2 Inch Socket 1aau.to/oru/1AXAA00016
• 3/8 Inch Socket 1aau.to/oru/1AXAA00016
• 1/2 Inch Breaker Bar 1aau.to/obb/1AXAA00078
• Ratchet 1aau.to/oru/1AXAA00016
• Socket Extensions 1aau.to/oqa/1AXAA00015
• Torque Wrench 1aau.to/ojI/1AXAA00044
• 3/8 Inch Wrench
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oci/1AXSS00035
• Gear Oil
• Liquid Thread Locker
• Marker / Writing Utensil
• RTV
• Rust Penetrant
• Safety Glasses 1aau.to/obb/1AXAA00343
• Center Punch 1aau.to/oaG/1AXAA00055
• Hammer 1aau.to/oes/1AXAA00091
• Magnet - Extendable
• Razor Blade / Gasket Scraper 1aau.to/oah/1AXAA00280
Subscribe: / @1aauto
Check out our playlist:
Ford F150 2009-2014 12th gen: • Ford F150 2009-2014 12...
Ford Auto Repair Videos: • Ford Auto Repair Videos
For More Info visit us at 1aau.to/h/bxx/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Пікірлер: 61

@1AAuto 3 жыл бұрын

√ *Watch the Video* √ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto √ *Do it Yourself* √ *Save Money*

@sergiozamorano6413 2 жыл бұрын

This is a pain in the ass. I just swap another same differential on my truck and is back in the road again. Sometimes swaping a differential from junk yard is cheaper. Good video 👍

@chrisstromberg6527 Жыл бұрын

Unless it's another junk differential that wasn't taken care of.

@markzanetti6228 3 жыл бұрын

Excellent video. One of the best how to's on YT.

@wolfman7393 4 жыл бұрын

Great video! Explains it perfectly.

@Schneids15 Жыл бұрын

As always another great How To: by 1A Auto. Thanks guys.

@TheEogprod 3 жыл бұрын

Thank you for the vid. Watched another one you guys did on this subject and it was horrible. This one is great!

@MrVarmont 4 жыл бұрын

Really helpful! Thanks!

@landoncarter6452 3 жыл бұрын

Excellent video, thank you for making it.

@1AAuto 3 жыл бұрын

+Fred Meyer Thanks for checking us out. Shop for high quality auto parts on 1AAuto.com: 1aau.to/m/Shop-1AAuto-c

@marvinmoss9749 2 жыл бұрын

Great video nice work

@AlistairMackay-ln8sj 2 ай бұрын

Brilliant tutorial. Many thanks.

@joe5636 Жыл бұрын

Great video the shop wanted $1300 so I did it myself and saved

@yonmoore 3 жыл бұрын

Great video, I think I'll hire this one out. One guy quoted me 1100 bucks for this job and now I'm thinking that he's being pretty reasonable. Thanks again. This video gives me the option to tackle the job myself and gives me the education to not get ripped off by a shop.

@JorgeTorres-gv6hm 6 ай бұрын

You are awesome brother

@donmiller4885 Жыл бұрын

Great explanation 🤔

@howardmurden8723 3 жыл бұрын

very professional and no cussing +++++++

@1AAuto 3 жыл бұрын

+Howard Murden Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@billward7675 4 жыл бұрын

Do you do a 2007 F150 the same way or did it change in 2009...Your videos are great!! Thanks

@RussMeister70 2 жыл бұрын

I'm just replacing the seal in a 95 8.8. The new flange and dust cover have a small space between the seal about 3 mm gap. I have some play in the flange. Could this small amount of gap cause abut .5" play and the truck drag when shifting like it I slow going into gear once clutch is let off. The parts fell out in my hand so I had no original anything to go by. I need some help lol. Tried more and less torque on the pinion nut. Runs smooth for a few hours then drags. Maybe I ruined rhe crush sleeve. I used a ratchet not a gun.

@RodrigoMaluf89 4 ай бұрын

Hello, its possible to replace a outer bearing without disassemblingthe rear end? Thanks

@gponti2102 3 жыл бұрын

excellent video, the hardest thing would be to find a mechanic as meticulous as you to fix that problem, if they weren't the problem would reappear soon...thanks

@johnb1121 3 жыл бұрын

Amazing

@oscarperezmedina6613 2 жыл бұрын

What’s the ring gear size on that inner pinion bearing

@sticknstonesbrkbones 4 жыл бұрын

where do you get the specs for all the bolts and torque?

@driverozzko 2 жыл бұрын

What was going on with the truck that led to the conclusion of a bad pinion?

@jeffmoore9179 3 жыл бұрын

to have a shop do this what would I expect to see for billable labor time?

@markzanetti6228 3 жыл бұрын

One shop told me 6 hours at $80 an hour. Cleanly he did it in much less than 6 hrs. (another shop told me 7 hrs at $145/hr)

@LPrimo_mobilerepair Жыл бұрын

What size original pinion?

@duancoviero9759 4 жыл бұрын

Whoa, definitely not for the faint of heart 😲

@kimboconsulting7746 3 жыл бұрын

What is the quoted time to do this job. Change out the Pinion bearing?

@markzanetti6228 3 жыл бұрын

AllData says 7+ hours

@okhotrodder Жыл бұрын

The newer 8.8s are super 8.8's. The bearings are larger, and the crush sleeve is taller and much harder to collapse. Not just a good impact is needed. A lot of muscle. You'll get irritated and tired changing the bearings on a super 8.8 with electronic locker.

@user-rx7df6sr1x 5 ай бұрын

Someone take up a collection to get him an air impact.

@NinthDensity 11 ай бұрын

So in short, get a shop to do it.

@chuckeady1 3 жыл бұрын

The video is good enjoyed it. But the sound man y’all need somebody to even that out. Listening to it n the trk and the video needs 15 volume an the music in between segments a 2 so it blows u away every time

@1AAuto 3 жыл бұрын

+chuckeady1 Thanks for the feedback! We'll pass this info along to our production team.

@justinleake1935 4 жыл бұрын

What's the part number of the inner bearing and race

@1AAuto 4 жыл бұрын

+Justin Leake Thanks for checking us out! If you would like to confirm the year make and model of your vehicle we can see if we offer the inner bearing and race for your application.

@alphaomega3766 3 жыл бұрын

What was wrong with the old stuff? What was the customer complaints?

@chrisstromberg6527 Жыл бұрын

Could be a growling or humming noise coming from rear differential area, pinion seal leaking, driveline vibrations.

@bthompson1767 4 жыл бұрын

Ok that's a job

@1AAuto 4 жыл бұрын

+BRIAN THOMPSON Thanks for checking us out!

@AZSemperFi 3 жыл бұрын

Wouldn't it be easier and cleaner to install the pinion flange after the pinion seal, slinger, outer pinion bearing and race and then insert the pinion bearing through the pinion flange so you don't have to hammer at everything? You really need to verify preload correctly so mentioning the best way to do it without actually doing it and showing it isn't good enough. No U-Joint check? No pinion depth check? No cleaning of rust from the flange yoke and pinion flange before reinstalling the driveshaft? No grease in the slip yoke to prevent bump and knocking?

@MikeG-js1jt 4 жыл бұрын

No way am I taking that thing back out and pulling off the bearing to adjust a few thou

@dmeads5663 3 жыл бұрын

Once I get my pinion out, could I just take it to an auto mechanic and have them remove it and install a new one?

@theGregofScarborough 3 жыл бұрын

Any transmission shop will have the proper press and adapters.

@davidkelley9509 2 жыл бұрын

I had a similar situation where I needed to get the inner race out of a wheel hub and no mechanics would take it out for me i was like wtf but yeah I ended up just cutting it like this guy

@lawrencecavens5760 11 ай бұрын

Being that this video was 4 years ago You should of stopped at the point where the inner race was exposed and you could of explained of the damaged - what would cause this damage - and possibly what the sound would be at that point in time. As with most of your video's they are good but like this one but explaining what the result and what might have caused it in the first place, The reason I say this is that repairs of this kind are very time consuming and expensive in repair shop for labor.

@jamiepavot1255 3 жыл бұрын

Unacceptable not to use the proper inch pound torque on the pinion ! My diff was rebuilt when someone "went by feel"... disliking this video

@1AAuto 3 жыл бұрын

+Jamie Pavot Thanks for the feedback!

@jamiepavot1255 3 жыл бұрын

When the commercials come on they are at double the volume of the rest of the video - shocking - and makes me not want to watch...

@1AAuto 3 жыл бұрын

+Jamie Pavot Thanks for the tip! We'll pass this info along to our production team.

@Kanesgarage 3 жыл бұрын

KZfaq premium

@samsteel4456 3 жыл бұрын

awesome info but please, next time turn up the speaking volume, turn down the air tool volume and shut off the background music.

@joshawesome1557 4 жыл бұрын

how did my man get 8 thousandths on backlash i saw the gauge reading between 9 and 10 tick marks

@scottalvarez8870 Жыл бұрын

Hate background music on instructional videos

@ryanallen5334 7 ай бұрын

Why is this guy using hand tools 😂

@1AAuto 7 ай бұрын

+Ryan Allen Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c

@silver4415 4 жыл бұрын

No bueno 😐