Buy Now!
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ia/1ASH...
New Wheel Bearing & Hub Assembly Set from 1AAuto.com 1aau.to/ib/1ASH...
Not only can a worn wheel bearing or hub be annoying if it is noisy or vibrating, but it can also lead to accelerated wear in other parts, or unsafe driving conditions. Replacing your worn bearing or hub with a quality TRQ part is a safe, smart, decision. This video shows you how to install a new wheel hub and bearing on your 2004-2008 Acura TL.
This repair was done on a 2006 Acura TL Base 3.2L Sedan 4-Door FWD and the process should be similar on the following vehicles:
2004 Acura TL
2005 Acura TL
2006 Acura TL
2007 Acura TL
2008 Acura TL
Tools you will need:
• Flat Blade Screwdriver 1aau.to/osp/1AX...
• Impact Screwdriver 1aau.to/oC/1AXA...
• Phillips Head Screwdriver 1aau.to/osp/1AX...
• Pry Bar 1aau.to/off/1AX...
• 14mm Socket 1aau.to/osr/1AX...
• 19mm Socket
• 32mm Socket 1aau.to/oC/1AAS...
• 1/2 Inch Impact Gun 1aau.to/obq/1AX...
• Ratchet 1aau.to/otS/1AX...
• Torque Wrench 1aau.to/omc/1AX...
• Drill
• Brake Grease
• Rust Penetrant
• Center Punch 1aau.to/oaU/1AX...
• Chisel 1aau.to/oaU/1AX...
• Hammer
• Pick 1aau.to/odC/1AX...
Subscribe: / @trq
Check out our playlist:
Acura TL 2004-2008 3rd Generation: • Acura TL 2004-2008 3rd...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.