Buy Now!
New Wheel Bearing from 1AAuto.com 1aau.to/ie/1AAXX00121
This video shows you how to install new rear wheel bearings from TRQ on your 1998-2011 Ford Ranger.
This repair was done on a 2011 Ford Ranger XLT 2.3L Extended Cab Pickup 4-Door RWD Automatic and the process should be similar on the following vehicles:
1998 Ford Ranger
1999 Ford Ranger
2000 Ford Ranger
2001 Ford Ranger
2002 Ford Ranger
2003 Ford Ranger
2004 Ford Ranger
2005 Ford Ranger
2006 Ford Ranger
2007 Ford Ranger
2008 Ford Ranger
2009 Ford Ranger
2010 Ford Ranger
2011 Ford Ranger
Tools you will need:
• Pry Bar 1aau.to/o8i/1AXAA00020
• 10mm Wrench 1aau.to/oab2/1AXAA00010
• 8mm Wrench 1aau.to/ojK/1AXAA00011
• 10mm Socket 1aau.to/obFf/1AXAA00017
• 19mm Socket
• 8mm Socket 1aau.to/obFf/1AXAA00017
• Bearing Puller
• Bearing Race and Seal Driver 1aau.to/oL/1AXAA00038
• Seal Puller 1aau.to/oq/1AXAA00040
• Trim Tool Set 1aau.to/oavW/1AXXX00006
• 3/8 Inch Socket 1aau.to/ob7i/1AXAA00016
• Ratchet 1aau.to/ob7i/1AXAA00016
• Torque Wrench 1aau.to/oa9H/1AXAA00044
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oNg/1AXSS00035
• Gear Oil
• Petroleum Jelly
• RTV
• Safety Glasses
• Drain Pan
• Floor Jack 1aau.to/oavX/1AXAA00068
• Jack Stands 1aau.to/oahY/1AXAA00065
• Large Hammer
• Pick 1aau.to/o26/1AXAA00037
• Razor Blade / Gasket Scraper
• Rubber Mallet
• Wheel Chocks
• Wire Brush 1aau.to/oxL/1AXAA00079
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.