For More Info visit us at: 1aau.to/h/fUz/
This video shows you how to install a new wheel cylinder on your 1996-2006 Jeep Wrangler. A wheel cylinder is the hydraulic component of a drum brake system. If your drum brake vehicle is leaking brake fluid, or the brakes are seized, this is where to look.
This repair was done on a 2003 Jeep Wrangler SE 2.4L Sport Utility 2-Door 4WD Manual and the process should be similar on the following vehicles:
1997 Jeep Wrangler
1998 Jeep Wrangler
1999 Jeep Wrangler
2000 Jeep Wrangler
2001 Jeep Wrangler
2002 Jeep Wrangler
2003 Jeep Wrangler
2004 Jeep Wrangler
2005 Jeep Wrangler
2006 Jeep Wrangler
Tools you will need:
• 8mm Wrench 1aau.to/ojI/1AX...
• 10mm Socket 1aau.to/obFb/1A...
• 19mm Socket
• Brake Spring Tool
• 1/2 Inch Impact Gun 1aau.to/oyd/1AX...
• 3/8 Inch Impact Gun
• 3/8 Inch Socket 1aau.to/ob7e/1A...
• Ratchet 1aau.to/ob7e/1A...
• Torque Wrench 1aau.to/oa9E/1A...
• 3/8 Inch Wrench
• Brake Fluid
• Brake Grease
• Brake Parts Cleaner
• Gloves 1aau.to/oa2k/1A...
• Safety Glasses
• Drain Pan
• Floor Jack 1aau.to/oavT/1A...
• Jack Stands 1aau.to/oahU/1A...
• Wheel Chocks
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.