2002-2006 Toyota Camry Valve Cover Replacement

Рет қаралды 38,414

3 жыл бұрын

2002-2006 Toyota Camry
Body Code: XV30
Engine Code: 2.4L 2AZ-FE
Tools Used:
10mm socket (3/8 drive)
3/8 drive socket wrench
4lb dead blow hammer
flathead screwdriver
razor blade
brake cleaner
Permatex grey tube gasket maker
Replacing a valve cover gasket is quite simple. Here's a link to the valve cover gasket I used (PART# FELPRO VS50530R): www.amazon.com/Fel-Pro-VS5053...
Here's a link to a valve cover if you need one of those and can't make it to a local junkyard: www.amazon.com/Engine-Toyota-...
Buy Stickers! developmentdivision.bigcartel...
Support The Shop! / chrismeacham
cmeacham_1...
Canon 77D (10-18mm, 18-55mm, 55-250mm)
GoPro Hero 7
Wondershare Filmora

Пікірлер: 60

@jenniferharris4085 8 ай бұрын

Who needs the Haynes auto repair manual when we have awesome KZfaq channels like Development Division? 2 Thumbs up my man.

@GUANAJUATOMEX 4 ай бұрын

Yes we save money A list 300 for this job I fixed by myself thank you so much

@johnbouldin9033 Ай бұрын

I replaced the valve cover and PCV today. Each coil clip snapped off and the harness on the drivers side made a snapping noise. Placing a bit of RTV at various points made getting the new gasket to stay put much easier. The hose wiring bundle on the passenger’s side was a pain until I undid the 2nd clip on the alternator. 95,000 miles on the 2006 Camty. It was Moms car. My 2005 Scion Xa has 306,000 miles on it…all mine. Thanks for the video.

@sweetbrownsuga504 Жыл бұрын

A single mom found this video to be helpful. Thanks for sharing.

@Laggy200ms 2 жыл бұрын

Torque Specifications for the valve cover was all I needed. Thanks a bunch.

@88flack Жыл бұрын

That front spot seems the a common failure point. Mine just did it in the exact same spot

@josemarrero7982 5 ай бұрын

My neighbor’s also!!! 2004 4 cylinder camry le. Must be common but def easy as heck to do!!! Mechanics here in NJ are charging 550 to do a 6 cylinder so i imagine the 4.. prolly save me 300 bucks easy! I do have tools tho so that helps a lot. Great video bro! Very very simple and straight to the point!

@TheHamburgler123 Жыл бұрын

Good stuff, man. I looked at a few videos for the same job and yours was by far the best paced, best filmed and most detailed. I appreciate the thoroughness.

@sutlive22 Жыл бұрын

I agree. This was very helpful. Also thank you for not going fast.

@currycurry2162 2 жыл бұрын

96 inch/pound that's all I needed thanks.

@frankstear2225 2 жыл бұрын

Good video, I like the patience and explanations that you offered to your viewers as well as telling what size sockets you need for the. Excellent job young man.

@Mojo27564 2 жыл бұрын

This is why I love the Camry all the years It's just wide open meat for you to work on easily

@sipzter 2 жыл бұрын

Totally agree with Frank Stear. Clear, concise descriptions of what you are doing and WHY. Keep doing more videos!

@kevinsboxster2310 2 жыл бұрын

Great video. I will use this to change the valve cover gasket on my nephew’s car.

@developmentdivision122 2 жыл бұрын

Good luck! Get after it!

@jeffwhitworth8510 2 жыл бұрын

Well done. I appreciate your showing clearly each step invoiced.

@jenniferharris4085 8 ай бұрын

Awesome video. DD just saved me $200.

@developmentdivision122 8 ай бұрын

This is what I LOVE to hear. thank you, have a blessed day :)

@jessejaviangel 2 жыл бұрын

Thank you for this, and for adding in the torque specs.

@youfrancis Жыл бұрын

This is great--very thorough! Thank you for shooting this video.

@nguyenngoclinh524 2 жыл бұрын

Very informative. Good steps by step instructions

@JackB313 2 жыл бұрын

Thanks so much for this video! It really helped me today

@mattpoelker4368 Жыл бұрын

Nice work, thanks for sharing this, I'm sure it will help me when I do the job

@trademaster6601 2 жыл бұрын

Perfect diy video , easy to understand

@jennyguzewicz6327 3 жыл бұрын

Nice job well done!!

@01sapphireGTS 9 ай бұрын

Great demo and post. Thanks ~

@therawbonesbrigade2812 2 жыл бұрын

Thanks for the video , doing this today

@jeetensingh7703 Жыл бұрын

Good job...thats how its done 👍

@Redneckrino 2 жыл бұрын

Wow great video thanks bud 👍🏼🇺🇸

@danteverdun2028 9 ай бұрын

Excellent video, thank you very much

@tonynguyen3144 3 жыл бұрын

Hi I like to learn From you because you are professional thank you very much! And you do very Be careful

@jeromehughes6957 3 жыл бұрын

Very good, thank you!

@johnhoff2806 3 ай бұрын

Great help, 😊 thank you .

@michaelkern8856 2 жыл бұрын

Good Video thanks, Plastic putty knife works good to separate Valve cover

@developmentdivision122 2 жыл бұрын

Good tip! Gonna order one or two for the shop now.

@aros007z 8 ай бұрын

Awesomeness

@SstyX666 2 жыл бұрын

Great video

@JoelKreider 2 жыл бұрын

Thumbs up for the Torque Spec!!

@johnhoff2806 Ай бұрын

Thanks champ

@galenflynn398 2 жыл бұрын

Doing this today on an 02 Camry XLE wish me luck

@galenflynn398 2 жыл бұрын

Update. Went pretty smooth until I decided to tighten the ground nut on top of the alternator and the end of my ratchet touched the dipstick guide and I popped the 120 Amp fuse. If you've ever changed one of those bad boys you'll know what I mean haha 😂 Anyways, I'd like to thank you for taking the time to make this video it made it easy as you showed pretty much every detail. Thank you again

@jacquesviau6165 8 ай бұрын

Thanks for the video your help is appreciated. I followed all the steps could someone tells me what I am doing wrong after I installed the gasket, cover won’t fell FLUSH with the rest of the engine. Please someone help me! Cheers

@rstephe 2 жыл бұрын

Good Video. Wish you could have shown better where the RTV was located (how much area needed some at reassembly) and how long to allow RTV to cure.

@johnbouldin9033 Ай бұрын

I added a small drop of RTV in the groove of the cover about every 5 inches and on opposite sides of the spark plug loops. Then I let it sit for 5 minutes to make sure it stayed put. The black Permatex maximum oil was what I used. Thick and sticky.

@user-do9ld8lt4j 5 ай бұрын

I can't get the cover off it's stuck when I removed the 2 10 mm bolts still won't come off

@IAmSleepy0 4 ай бұрын

The coil wire harness! (That little black box, mine wrapped in duct tape) Is it safe to just bend it out of the way while removing and installing the cover? Disconnecting the battery already put me in idle relearn mode and freaked me out so I wouldn’t want to find out any of wire problems 100 miles later 😅

@jakeshallenberger7413 2 жыл бұрын

Anybody know what second hose i called i need a replacement

@johnmonk3381 10 ай бұрын

This was a valve cover *gasket* replacement not the valve cover replacement

@0x00000000000000000x 2 жыл бұрын

I’m having a hard time finding the ignition coil bolts. Does anyone have any idea where I can get them? Old Camry I’m replacing the cover has them broken and stuck in the cover and vehicle misfiring. I got mostly all the parts just need those bolts to hold down the ignition coils but can’t find them anywhere

@developmentdivision122 2 жыл бұрын

I could be wrong, but I believe it is a 6mmx1.0 thread by 7/8” in length (10mm head) You should be able to find replacements at a local hardware store.

@rayshawn2323 2 жыл бұрын

Dang no one put them back they suck no wonder you misfiring u might not need new ones lol