How to replace the clutch cylinder in the gearbox side. Alfa Romeo 156 1.9 JTD

No video

How to replace the clutch cylinder in the gearbox side. Alfa Romeo 156 1.9 JTD

Рет қаралды 18,655

Жыл бұрын

Hello guys! Something that is quite common in cars with hydraulic clutch actuation. Never forget the main reason why this early failure happens, which is always the systems lack of maintenance. Mandatory replacement, AT THE MAXIMUM every 40 thousand kms or 2 years for the brake fluid and clutch pump circuit.
Its failure is inevitable and being made of metal even more so, over the years it is now possible to have at least the main clutch pedal pump in plastic, which extends its useful life by twice as long or more. Nevertheless changing the fluid is imperative.
If you liked this or any other of my videos, please SHARE with your friends, hit the LIKE button and consider SUBSCRIBE!
--------------------------------------------------------------------------------
PayPal link to help my channel:
www.paypal.me/...
Support the channel via MBWay: (+351)913225320
Patreon link to help my channel:
/ alfaromeonoproblem
--------------------------------------------------------------------------------
All Videos for Alfa Romeo 164 and 166 V6 Turbo Busso 2.0L:
• Behind the scenes, Alf...
Timing belts\chains How to:
• Alfa Romeo 155 1.9td t...
Alfa Romeo owners in need of help! I try to:
• Car sold with warranty...
Alfa Romeo Experts in Potugal (so far):
• New series! Alfa Romeo...
Ac Sytems, faults, solutions ans tips:
• Stop charging the A/C ...
Cooling systems, failure and maintenance:
• Is the temperature gau...
Ligth bulbs and ilumination:
• Light fault system on,...
Everyting suspension:
• Broken alfa 75 suspens...
Clutch engagement, DMFs, master and slave cylinders:
• How to remove and re-u...
Brakes, solutions and problems:
• Big brakes!? Do you re...
Power problems and solutions:
• Mjet Injectors, how to...
DPF and FAP problems and solutions:
• DPF and FAP, do you re...
Project Alfa 75\Milano:
• Alfa Romeo 75, project...
Alfa 33 1,7 16v complete restoration:
• Alfa Romeo 33 1.7 16v ...
Tutorial videos:
• How does a starter mot...
Quick tips:
• Quick tips! Car don't ...
Electrical issues:
• How to test your fans?...
Mjet\jtd engines, hard start or no start:
• It's worse! But why? ...
Vlog videos:
• My Alfa Romeo 155 pres...
Autel Diagnosis Machine:
• How to SOLVE airbag li...
Contact me:
alfaromeonoproblem@gmail.com
Where i do my research of parts: www.eper.fiatforum.com
Where i buy OEM parts in PORTUGAL:
JRParts www.jrparts.pt/
Rua Dionísio Rodrigues 70, 2415-801 Leiria PORTUGAL
(+351)244820770 lojaonline@jrparts.pt
Where i buy all ORIGINAL parts in PORTUGAL:
LizItalia www.lizitalia-... (+351)244 871 520
Rua Dr, R. Virgílio Vieira da Cunha, 2401-903 Leiria PORTUGAL
Parts e-mail: vitorjoao.lizitalia@lizauto.pt
Alfista salutations!
clutch cylinder:
FTE 3101525
KN25047A1
#AlfaRomeo #alfa156 #AlfaRomeoNoProblem

Пікірлер: 46

@marknemeth2989 Жыл бұрын

Thank you! Do not stop putting videos from 156 please ! :)

@alfaromeonoproblem Жыл бұрын

Thank you very much! I have hundreds of them to come

@andrewgrindrod9274 Жыл бұрын

As usual an excellent video, would be good if you could show how to bleed the clutch on the twin spark engine. Keep up the good work.

@alfaromeonoproblem Жыл бұрын

Hello. Thank you very much for watching! On my new realise today I have a clutch cylinder replacement and bleeding of the system. Hope it helps

@alfaromeonoproblem Жыл бұрын

What car is it? 156? If so, it is just like this one, even if it has the internal push bearing

@andrewgrindrod9274 Жыл бұрын

@@alfaromeonoproblem It's a 2007 GT with 1.8 twin spark.

@alfaromeonoproblem Жыл бұрын

The bleeding niple is underneath a rubber cover. Just follow the hydraulic line.

@andrewgrindrod9274 Жыл бұрын

@@alfaromeonoproblem Thanks. 👍

@Nikolay-ll6ki Жыл бұрын

Hello from Bulgaria. Can you make some videos about common failure and problems with Alfa Crosswagon

@alfaromeonoproblem Жыл бұрын

Hello. I could, only about ten where sold here in Portugal. There are nowhere to be seen

@sergiocovelli Жыл бұрын

Me too I have a Crosswagon with 18 years old and 250.000 km. I can't imagine me in another car! Here in Spain too are very rare currently.

@theonlyvinz 4 ай бұрын

i v got the same bug on a gtv 916 ts, no oil leak but sometimes pedal going down, after push back on high position every think run fine for few times only

@chrissavage5966 Жыл бұрын

Back when I have my 155 V6 (right hand drive), I had the pedal sticking down at times. Replaced the slave as a matter of course....but sadly, not only was the slave done, the master was too, and on a right hand drive V6 that job was....unpleasant!! And yes Bruno, I've probably told this story before too ;)

@alfaromeonoproblem Жыл бұрын

Hello! No, this one is new! Always wonder how some things are fitted on right hand drive cars. Like the room for the brake servo and other things.. like the ones you mentioned. I wonder if that is way hondas had the engine turned around, Japan being rhd too

@chrissavage5966 Жыл бұрын

The RHD 166 has torque rods to connect the pedals to the brake servo and throttle pot that are mounted on the left side as per LHD….but I confess I can’t recall what they did with the clutch master. I believe the 155 was the same for the brakes, with a torque rod linking the pedal to the servo on the left …but I most definitely recall the clutch master being by the pedal! By far the worst part of an overall hellish job was the master cylinder output pipe connection - access was almost impossible with the engine in. I suspect you are right about Japanese cars. Makes sense they would design them to suit the home market, although they no doubt sell more LHD cars than RHD

@alfaromeonoproblem Жыл бұрын

That is very curious! I've seen that on driving school cars, to have two sets of pedals. Thanks for sharing that

@djlosmi Жыл бұрын

Perfect video, as always!

@alfaromeonoproblem Жыл бұрын

Thank you so much

@jal1797 Жыл бұрын

I was unlucky because my 147 was at parking for years.The leak was from master cylinder and I replaced the clutch at 150.000 which was in good condition.

@alfaromeonoproblem Жыл бұрын

Thanks for watching and sharing

@Gjldo Жыл бұрын

procedure is incorrect, there's not enough swearing :D

@alfaromeonoproblem Жыл бұрын

Sometimes that is! I try to avoid it on camera

@JacklapottTv 10 ай бұрын

Hi there, on my 75 i have a squeezing sound from the back when pressing the clutch pedal, any idea about it ?

@alfaromeonoproblem 10 ай бұрын

Hello. See if this will help you out: kzfaq.info/get/bejne/idiJdtWhzt_Lkpc.htmlsi=fG_VwJ3V3pVDIhym

@ramblinginmeath4950 28 күн бұрын

Excellent video - do you know where I can buy a new master cylinder for my right hand drive 159 JTDM 2010 - Greetings from Ireland

@alfaromeonoproblem 28 күн бұрын

Hello. That may not be easy. Here in Portugal they do not exist, so I do not know. Sorry

@ramblinginmeath4950 27 күн бұрын

@@alfaromeonoproblem If I locate a clutch master cylinder (new) would you suggest I should buy it as back up ? regards from Ireland

@alfaromeonoproblem 27 күн бұрын

@ramblinginmeath4950 for sure! Keep it out of moisture

@juancamilosanchez6605 Жыл бұрын

Hola maestro te agradezco por los videos, tengo una pregunta, tengo una alfa romeo 156 1.6 2002 y me gusta saber que caja de 6 velocidades me servirá, mi carro tiene 5 velocidades y me gustaría tener 6 para no llevar tan revolucionado el carro

@alfaromeonoproblem Жыл бұрын

Olá. A caixa de 6 velocidades que pode lá colocar é a cor motores Mjet. Mas tenho que o motor não deverá aguentar. Precisa da caixa de velocidades, os cabos de seleção e a alavanca de câmbio. O kit de embreagem e volante de motor não sei nem a melhor forma.

@juancamilosanchez6605 Жыл бұрын

Lleva mucho trabajo y dinero también, lo dejare así (con 5 velocidades) :(