We are going over the steps to replace the Drive Belt (Serpentine Belt) for a 2009 Nissan Frontier XE (L4 - QR25DE). Very easy and quick task which can save ~$200.
1. Signs of a Bad Belt - 0:18
2. Step 1 (Remove Air Duct/Resonator Bolts) - 1:37
3. Step 2 (Remove Air Duct and Resonator Assembly) - 2:26
4. Step 3 (Turn Auto Tensioner - Clockwise) - 3:12
5. Step 4 (Remove Drive Belt) - 3:33
6. Step 5 (Install New Drive Belt) - 4:45
7. Step 6 (Perform a Test Run/Inspection) - 6:08
8. Step 7 (Install Air Duct and Resonator Assembly) - 7:04
9. Step 8 (Install Air Duct/Resonator Bolts) - 7:30
10. Step 9 (Torque Air Duct/Resonator Bolts) - 7:40
11. Step 10 Test Drive - 8:32
Products Used:
This video contains affiliate links for which I may receive compensation.
Dayco 5060815 Serpentine Belt - amzn.to/4ct7xAe
Drive Belts (Backup Links) - amzn.to/3VMsn7S
Extension Bar Set - amzn.to/36EejGQ
Lexivon Torque Wrench - amzn.to/3knC6yh
Serpentine Belt Tool - amzn.to/3L9JryR
Threadlocker - amzn.to/3XnNyP0
Tools:
1/4" Torque Wrench (49-83 in-lb)
1/4" Socket Wrench
10mm Socket
14mm Socket
Extension Bars
Semi-Permanent Threadlock
Serpentine Belt Tool
Disclaimer: Content produced from Mcgurr Entertainment is for entertainment purposes only. This information is not endorsed by any agency/company (such as Ford) and is intended as an entertainment. Mcgurr Entertainment assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. All content on KZfaq is provided in good faith, however we make no representation or warranty of any kind, express or implied, regarding the accuracy, adequacy, validity, reliability, availability or completeness of any information on KZfaq. Use this information at your own risk.
#SerpentineBelt #Nissan