How To replace the Muffler on Your Piaggio Vespa

Рет қаралды 31,711

4 жыл бұрын

If You need to replace your Muffler on Your Piaggio Vespa PX here You can see how to proceed.
May be the exhaust is old, rusted, obstructed, in any case You can follow this tutorial to solve the problem.
Thanks.
🔔 Remember: You will need a metric set of wrench to work on the Vespa i suggest You something below on description.
Vespa PX Polini muffler (high performance Made in Italy): ebay.us/dMpr0q
Vespa PX Polini muffler (high performance Made in Italy): amzn.to/3tObk6N
Vespa PX Muffler (OEM standard): ebay.us/AddiUi
PPE (Personal Protective Equipment) 🤿🎧
Nitrile gloves (high quality): amzn.to/3UQMA9L
Eyes protection glasses: amzn.to/3EscPwu
Respirator mask: amzn.to/3ApsCeg
Metric socket kit: amzn.to/3gmKwr5
Metric wrench ( high quality full set): amzn.to/3gpkDH0
Metric hex wrench: amzn.to/3hXamT2
Lubricant: amzn.to/3OhAP9U
Silicone Lubricant: amzn.to/3OkONYH
Please subscribe to my channel and leave thumbs up 👍 if You appreciate my work ❤️
Try Amazon Prime 30-day Free Trials: amzn.to/3TU9ETD
Join Amazon Family 30-Day Free Trial: amzn.to/3GrLpJs
This will support the channel ❤️
Follow me on social: / 100047639114414
Instagram: / cantharus.sicily

Пікірлер: 42

@karimullashashaik8684 3 жыл бұрын

Very good video Sir from Vespa owner since 1994 God bless you and your family for best tutorial video

@CantharusENG 3 жыл бұрын

Thanks You Very Much 🧡🧡🧡🧡🧡🧡

@bisugzzz 4 жыл бұрын

Thank you so much! Hoping gor more videos

@CantharusENG 4 жыл бұрын

Thank You, I'm busy with a baby born few days ago. But i should be back as soon as possible.

@amitdvir5655 2 жыл бұрын

The best tutorials in youtube

@CantharusENG 2 жыл бұрын

Thank You very much 😊 ☺ ❤

@By__Faris 3 жыл бұрын

Best as always 👌🏽

@CantharusENG 3 жыл бұрын

Thanks You 😊😊

@RegBlackwood 11 ай бұрын

Great video. Just changed the muffler and it went exactly as you said it would. Replacing the long exhaust bolt was tricky, so I first inserted a long screwdriver to align the bracket holes, then held the muffler in place with one hand while inserting and finger tightening the exhaust bolt with the other hand.

@CantharusENG 11 ай бұрын

Thank you very much 😊 Ask any questions if you need

@benoitvanhaute2283 4 жыл бұрын

Save me a visit to the workshop. I will change the exhaust by myself and hopefully pass MOT. Un saludo from Spain.

@CantharusENG 4 жыл бұрын

Muchas Gracias un saluto dall'Italia 😄

@robertmurray9948 4 жыл бұрын

Good video helped me change my exhaust.....👍

@CantharusENG 3 жыл бұрын

Happy to ear that ;-)

@gleeson67 Жыл бұрын

Grea videos. Can you make one on tightening the steering colum please?

@CantharusENG Жыл бұрын

As soon as I will do some maintenance on the front part of Vespa I will do it. But i Think will not be soon.

@crypzer 9 ай бұрын

can you make a video for fixing vibration on a vespa lml nv its my grandfather´s its pretty old

@CantharusENG 9 ай бұрын

Where vibration came from?

@chE3z1 3 жыл бұрын

Tried wiggling the exhaust back and forth to shimmy it off (after bolt removed and collar loosened) and it wont budge at all! Had to get a crowbar between the box and the frame just to move it a tiny bit. Any advice?

@CantharusENG 3 жыл бұрын

Try to rotate while pulling. If is hard is not easy

@daledale9464 4 жыл бұрын

Can't seem to loosen the bolt which holds the exhaust pipe underneath any tips

@Cantharus 4 жыл бұрын

Use a longer leverage. A pipe or a longer wrench Spray come lubricant and let it work few minutes. Hope You will succed ;-)

@CantharusENG 3 жыл бұрын

Solved?

@CaryOutArk Ай бұрын

Is it normal for it to leak a bit of black oil where the exhaust attaches to the engine?

@CantharusENG Ай бұрын

No, you should disconnect the exhaust, clean the exhaust duct and the muffler and seal with some exhaust sealing paste.

@tapepa4664 2 жыл бұрын

❤

@CantharusENG Жыл бұрын

😍

@adityasaha9617 2 жыл бұрын

Brother why you pinch exsust tip?

@CantharusENG 2 жыл бұрын

It was like this when i bought. The new exhaust from Piaggio come so. Someone cut it. I leave it, since Piaggio made it like this. In the future in case of exhaust block or similar problem i will cut and short the tip. Thanks For watching the video, please subscribe if You like my videos. Regards

@gzman1 Жыл бұрын

15mm and 17 mm note to self

@CantharusENG Жыл бұрын

🙂

@kevinchen0705 2 жыл бұрын

excuse me how about tire air pressure

@CantharusENG 2 жыл бұрын

For the rear is 2,0 bar for driver only. 2.5 bar if You carry a passenger. Usually is set at 2.5 bar in any case. Front Tyre should be at 1,75 bar but I and most people use 2.0 bar with or without passenger

@ilesauvage 2 жыл бұрын

Pas besoin de dégonfler le pneux si c'est l'enlever après...

@CantharusENG 2 жыл бұрын

I was just showing 2 way to operate

@markletts8802 4 жыл бұрын

Ive got a meter long bar on my spanner and that bloody nut still won't move😳🇬🇧

@CantharusENG 4 жыл бұрын

Sorry I have no tips for You, try some strong chemical lubricant

@markletts8802 4 жыл бұрын

No problem,had to use an angle grinder and cut the old exhaust of..TY for the reply though,appreciated..🇬🇧

@bartsimpson8616 Жыл бұрын

Signore ,may God bless you , the ''mechanic'' who should fit on my px 200 /1988 my new polini box he didnt know how . and exhoust hang and leak ! what is your advice about main jet , should i go one size bigger 'cos of polini or no ? Thank you , great video .

@CantharusENG Жыл бұрын

If You have leak check this: kzfaq.info/get/bejne/qL-SZaanmJitc30.html it is in Itlian but may give You an idea on a possible common solution. If You say me the exact model of the muffler and the engine of Your Vespa I can tell You if Polini recommend or not a bigger size of the main jet

@CantharusENG Жыл бұрын

Usually You may rise the main jet by 2 or 4 point

@bartsimpson8616 Жыл бұрын

@@CantharusENG THANK YOU ,