How To: Replace the O-Ring on a Pool Sand Filter

Рет қаралды 264,920

9 жыл бұрын

Filter Parts - bit.ly/37iVC6T
Fittings & Union Parts - bit.ly/2sSvXTw
Magic Lube O-ring Lubricant - bit.ly/36jlcqI
If your pump does not hold prime and the O-ring on your pool sand filter is old and stretched, the O-ring may be leaking air and it may be time to replace it. This video shows you how to replace your pool sand filter's O-ring.
To view this guide step by step on our website, visit:
bit.ly/36klCxk

Пікірлер: 27

@andrecanuck2459 5 жыл бұрын

It looks like the voice is coming from inside the pipe! That’s give more personality to the instructions. (Like, who knows better than your pool filter pipes) I love it 😃👍

@caramia1042 5 жыл бұрын

🤣

@maryjomcintire4123 3 ай бұрын

This was close enough to my extremepower filter to help me out on placement of the o-ring. The extremepower was very inexpensive but it did not come with any detailed instructions. Thank goodness for youtube and thanks inyo pools for posting this video!

@gedionsamuel2256 2 жыл бұрын

Love the invisible silicone lubricant that was applied @ 3:10 😁. Great video regardless!

@DanDamnedRoad 4 жыл бұрын

How do you know that the clamp are enough tightened? I see that you are leaving a gap between the two. They dont join together. What gap should i leave. One inch?

@gera8412 3 жыл бұрын

Greetings..my sand filter keep leaking some small amount of water even when the machine off and the port valve is in the closed mode..the water came out from the in line pipe from the pump to sand filter(its happened when i want to change the pipe line)..do you had any idea what happened with my sand filter..tx in adv..greetings..god bless

@XrpAndy 5 жыл бұрын

A lot of sand filters have the multi port valve separately from the filter.

@mindievallati2 Жыл бұрын

Do you have to remove pipping? Can you do it without cutting? I don’t have connections and just pipping and hoping I can change the ring without cutting. I have to change my o-ring and it seems like a big job to cut the pipping.

@mowtown75 4 жыл бұрын

Seeing where it sat and gapping before collar went on would be handy.

@bigbomber5 5 жыл бұрын

I just changed out the sand in my filter. Everything went smoothly until it was time to put the metal collar clamp back on. It's like the multiport valve was sitting too high when I placed it back onto the sand container. I had to get my brother to help push the top section down as I barely got the clamp to secure. Then, of course, I went to backwash after seemingly everything was finished to find water leaking from the collar area. O-ring was on the multiport valve, but was not inspected. What could be the issue? Is it normal when replacing the multiport back onto the sand container that it can sit kinda high, like it's not seated completely?

@sharonwilkinson-crader4059 4 жыл бұрын

Ours will not quit leaking and its brand new... HELP!!!

@danshelburne1948 4 жыл бұрын

Our sand filter has a tapered o ring

@shoalmanjim 3 жыл бұрын

I just bought a house with one of these cheap filters. Same leak, same place. I slowed it down with flex seal. I am gonna replace it with a real filter. Obviously a manufacturing deffect.

@maryl5021 10 ай бұрын

Check that filter is level. If its not it will leak

@everythinghomerepair1747 6 жыл бұрын

If you open the drain valve wont the sand come out of the filter and get on the threads of the drain valve.

@Inyopools 6 жыл бұрын

The sand filter's drain assembly has a screen that looks similar to the filter's laterals. The screen perforated case prevents the sand from pouring out. - MGS

@mowtown75 4 жыл бұрын

Why open it, what’s the benefit?

@maryl5021 10 ай бұрын

It will decrease the pressure in the tank and drain the water too

@wenzeldiesel1491 3 жыл бұрын

If my Flange Clamp is leaking and I want to check if the o-ring is damaged, is there a risk that once I unscrew the flange clamp, the water will start coming out?

@maryl5021 10 ай бұрын

Open the valve at the bottom of the filter to let the water and pressure out first before u begin

@leannewilliams6218 2 ай бұрын

This is the same as mine can you tell me the size of the o ring so i can bye one bought to all ready but they are to small

@Inyopools Ай бұрын

The valve and filter shown in the video are the SP0714T top mount valve, ad the Hayward Pro Series Top Mount sand filter. The O-ring we changed is the 6-3/4" ID, 3/16" for Hayward, Jacuzzi Pumps and Filters - 47036447R - www.inyopools.com/Products/07501352023079.htm Hayward Pro Top Mount Sand Filter Parts - www.inyopools.com/partlisting/hayward-pro-top-mount-sand-filter-18-21-22-23-24-27 Hayward Multiport Variflo XL 1 1/2" SP714T Parts - www.inyopools.com/partlisting/multiport-variflo-xl-1-1-2-sp714t

@leannewilliams6218 Ай бұрын

@Inyopools hi which link is for the clamp O ring replacement for sand filter?

@mkdsk101 2 ай бұрын

If the o ring is bad would it be letting sand into the pool?

@Inyopools 2 ай бұрын

No, the o-rings on the filter and valve aren't the last barrier keeping sand from your return. If you see the sand in the pool, one of your laterals may be cracked. The laterals are the last barrier between the filter tank sand and your pool. Find your Hayward Filter parts here - www.inyopools.com/category/hayward-filter-parts.aspx