Battery replacement at Philips Bodygroom Series 7000 TT2040/32 Bodygroomer by akku-wechsel.de, to order, please go to www.akku-wechse...
Пікірлер: 145
@flesz_5 жыл бұрын
Thanks for the video, it was super helpful. I have replaced the battery successfully and my shaver is working like new now. From ebay I bought Lloytron AAA Rechargeable Batteries NiMH 900mAh which I used for replacement. Here is a couple of tips for those who are planning to replace the battery. I have to admit it wasn't as smooth as expected and in places it was painful. 1. At 2:00 you can see he is struggling to unscrew both screws , make sure you have a thin screwdriver for them , the access is not easy. 2. At 3:38 it was difficult to remove the cover as well as put it back in. I used flat end of a tea spoon to pry it up. Initially I was using screwdriver for that, but the plastic is not so strong and you might break it. 3. At 6:01 have a look at the positive cap of the battery. It is nearly flat the same as negative. This is importantant because the battery pack fits the shaver so tight up to a milimeter. I had a problem with the standard batteries I bought as the positive cap was longer and I had to file it up to the carbon, only then I could fit everything back inside. Thinking about it now you might want to find a replacement batteries with the positive cap being as flat as possible. You need to solder the wires to the batteries as in 7:31, the replacement pack has already negative and positive joined together with a thin piece of metal. I used thin wire to solder positive with negative, you need to be careful not to add too much solder or the pack won't fit back in. I also damaged the battery when soldering it, the temperature was too high and the battery got a hole ,started hissing and got really hot. Good it didn't explode. Had to purchase another and wait a couple of days. If you finally solder everything 10:43 is a moment of truth. When I did it first time I had to unsolder everything and redo it as it didn't fit. Had to use thinner wires and file the positives of batteries. It was f** frustrating. Second approach worked fine and I thought I am nearly there, when it comes to putting back the cap as you can see in 11:11. It was a real pain. As you can see he struggled with it as well and cut the video. You need to pull the side of the shaver to stretch it a bit for the cover to fit in. I used C shape piece of metal to pull it to the side and pressing the cap down at the same time. After that point it's easy to finish and you can enjoy your new shaver again :]
@markuslepisto78244 жыл бұрын
What kind of battery did you use? Can I use 1,2V?
@UrpaDeFerro4 жыл бұрын
Thanks
@TheBigNicko Жыл бұрын
Thanks for your additional guide... I'm attempting this as my first soldering project ever... wish me luck
@flesz_ Жыл бұрын
@@TheBigNicko good luck Make sure you buy a good pair of batteries, maybe warta , Duracell or whatever famous brand with good reviews. 3 years passed now and my shaver started behaving weirdly. Even when fully charged it won't start and the orange light will start blinking when trying to press power on . I need to put it back to the charging base for 5 minutes (it will stay on constant green anyway as it's fully charged) and then take it out and immediately switch it on. It will then work all the time for a long time , but I can't turn it off mid way because it will not switch back on again. So must be to do with the batteries
@flesz_11 ай бұрын
Another update. It looks like electronics failed completely. Didn't even want to work with new batteries. Rather than just binning the shaver I connected the batteries directly to the engine lol It's working now for what I need it for kzfaq.info/get/bejne/qKqgqtp5yt3HaJs.htmlsi=v4Hgz6LluIvrNtP5
@StanRain3 жыл бұрын
Exactly the video I needed. Thank you! I love the product, but wow, how they handled the battery in this thing is criminal.
@f0ca943 жыл бұрын
I couldn't agree more! They made it as hard as they could to replace it. Evil corporation. :(
@aquaimmy2 жыл бұрын
Planned Obsolescence...
@chrishayes57552 жыл бұрын
SUPPORT RIGHT TO REPAIR
@enriquesinghjr5 жыл бұрын
While watching the video I went: 1) I can definitely do that, piece of cake! 2) I can also do that! 3) I can *probably* do that. 4) Well... maybe not that. 5) I can't do that. 6) WTF! I definitely *CAN'T* do that! 7) F*ck this, I better get a new one.
@JuvenalMena5 жыл бұрын
To get the battery. That's my problem.
@pbr845 жыл бұрын
@@JuvenalMena I made it myself with a spot welder. You can maybe buy 2 AAA batteries with soldering tabs? And solder it by yourself. (if you don't have a spot welder)
@techelectricfuture30945 жыл бұрын
You can't?: 1) use a screw driver? 2) use a lever? 3) Solder? How to become a man: If you do not possess these skills and think that you should buy a new one, then this is the perfect project to learn with and at least attempt to acquire these skills. Buy a new one when you fail and try again later.
@techelectricfuture30945 жыл бұрын
How to become a man: If you do not possess the skills to fix your razor and think that you should buy a new one, then this is the perfect project to learn with and at least attempt to acquire repair skills. Buy a new one when you fail and try again later.
@preciouspet35154 жыл бұрын
Stop drinking the soy milk, you're becoming a woman
@jackem89223 жыл бұрын
Excellent video - I made the replacement, and the Bodygroom is working perfectly once more. It's so gratifying to refurbish a perfectly operating device rather than sending it to the landfill, and having to pay big money for a new one. Shame on these companies for the built-in obsolescence. The most difficult aspect I found was replacing the black plastic panel over the power pack, the one that is secured with four screws. Possibly because the plastic had lost elasticity, it took a lot more force than shown in the video. The two inner edges of the panel fit inside the narrow gap between the shell and the circuit board, and I was nervous about applying so much force so close to the circuit board. In the end, I used a blunt knife the guide the panel into position on either side. I suggest doing a dry run without the power pack in place to understand how the piece fits. Also, the replacement battery sent by akku-wechsel had the L-shaped terminals soldered on upside down, but since they were longer than in the original, they could still be wrapped under the battery to complete the replacement procedure.
@chrishayes57552 жыл бұрын
funny how a quality trimmer uses trash-tier chinese no-name batteries 😆 like, guys you can't spend an extra $0.30 to put a decent battery in?
@mnkrck5 жыл бұрын
Super easy, kann ich nur jedem empfehlen, war in einer halben Stunde erledigt. Ich war auch positiv überrascht, wie einfach und spurenlos sich das Gerät öffnen lässt. Bis auf die Ladeelektronik super gemacht von Philips.
@PrepaidKreditkarte812 жыл бұрын
Das hat schnell und einfach funktioniert, danke! Der alte Akku hatte 750mah und der neue 900mah. Sollte dann auch länger halten, was ideal für etwas haarigere Personen ist. Einzig das Löten ware eine katastrophe.
@NikoMakovecki6 күн бұрын
Vielen Dank für dieses Video. Er ist großartig. Ich habe die Batterie ohne Probleme ausgetauscht. Die 4 Schrauben an der schwarzen Abdeckung lassen sich übrigens auch mit einem Schlitzschraubendreher lösen. Das Gerät funktioniert wieder wie am Schnürchen.
@AkkuWechsel3 күн бұрын
Vielen Dank für dein tolles Feedback! 😊 Es freut mich sehr zu hören, dass der Akku-Wechsel so gut geklappt hat und dein Gerät wieder einwandfrei funktioniert. 💪 Danke auch für den Hinweis mit dem Schlitzschraubendreher - das ist sicher für viele andere Zuschauer ein hilfreicher Tipp! 👍 Wenn du noch Fragen hast, stehe ich gerne zur Verfügung. Viel Spaß weiterhin mit deinem Philips Bodygroom! ✨
@randywinter26352 жыл бұрын
Thanks for video. Excellent! Easier than I thought and added another life to my groomer. Not to mention I kind of enjoy little projects like this when it is too cold to go outside. Came apart, and everything went back together without issue.
@fmsantoscar5 жыл бұрын
Unbelievable in this day and age and with all the environmental problems that they don’t allow for an easier battery replacement than this complicated soldering process....will get a new machine instead and throw my old one in the bin unfortunately
@ablaman3 жыл бұрын
What’s funny is that what your doing isn’t much better. I get your point but disposing your unit still adds to landfill. Batteries can be recycled.
@JoachimMoeller6 жыл бұрын
Bought the battery, all good now. One thing missing from new vs original battery was tiny holes to put wire thru before soldering. On second thought I should have punched some using a thin nail. Just soldered wire on top of battery flat part. Hopefully it'll withstand vibration and hold or I'll have to do it again. Bought this expensive trimmer more years ago than I can remember. Used it infrequently which might have contributed to battery dying. I'd run it a few minutes for a quick trim before needing to charge again. Now it's like new again. Massively grateful.
@eboro15396 жыл бұрын
Any difference between those and any other rechargeable batteries?
@KNGTTO5 жыл бұрын
Have you made it work both sides of the trimmer? in the video only it worked 1 :S Thank you. What type of batteries can use this trimmer? 1.2v 900mah? 2.4v 700mah? 3.4v 3400? Thank you
@dbegin19724 жыл бұрын
@ @@KNGTTO You are a really pain in the ass with always the same questions...
@stefanzellner51405 жыл бұрын
Gerade im Moment fertig geworden... läuft wieder. Vielen Dank fürs Video.
@rockssocks54513 жыл бұрын
I just did this... with standard AAA rechargeable batteries very easy to do and you just have to tape the batteries together with some electrical tape or glue and solder the batteries together with the tab from the old battery. Then to the pack of the TT2040... For soldering i would suggest using some flux to allow for the solder to attach properly.
@indicator_of_ruzophobia7 ай бұрын
Відео стало у нагоді. Дякую за вашу працю.👍
@bam9994 жыл бұрын
Excellent video. Only 15 minutes to complete. Much easier to undertake than my Philips QS6160 that I replaced the batteries in a few weeks ago. Thanks! Now have two razors in perfect as new working order for around £26.
@knollis45 жыл бұрын
P-E-R-F-E-K-T , danke für dieses fantastisch einfache Turtorial. Angesehen, Batterie bestellt, unter nochmaligen anschauen parallel Akku eingebaut, FERTIG ……………. !
@techelectricfuture30945 жыл бұрын
I used this article to repair my groomer. Thank you!
@markuslepisto78244 жыл бұрын
What kind of battery did you use?
@techelectricfuture30944 жыл бұрын
@@markuslepisto7824 - 2x Exell 1.2v NiMh cells sourced from ebay
@markuslepisto78244 жыл бұрын
Thanks!
@ablaman3 жыл бұрын
I didn’t buy your batteries but your instructions were great. Breathed new life into a solid body groomer
@ryancasler4 жыл бұрын
Uhm....you totally skipped the part where you put the cover back on the battery compartment. I bought the battery having watched the video and it wasn't until I was attempting to do it that I noticed the convenient cut-away when you went to do that step. All of a sudden, it's just on. Not helpful at all!!!!!! If anyone is trying to do this, insert a jewler's screwdriver near the space between the cover and the body near the wider end and push down ad your push the screwdriver back, along the opening. You have to do it on both sides and you have to get the lip up over the lip on the cover. Also, when putting the metal clip on the top, another part that is left out, insert both screws but leave them loose. As you tighten down, make sure the clip is secured at all 4 points where it meets the body of the shaver. Otherwise, it won't tighten down correctly.
@peloponnisios3 жыл бұрын
11:10 Was a tricky to place. Thank you for the video and the battery that just arrived and installed it!
@socrates_the_great62093 жыл бұрын
Are you joking? He have been fighting with that part and cut it out so it looks like it was piece of cake lol.
@peloponnisios3 жыл бұрын
@@socrates_the_great6209 I used an old debit card and it was smooth....
@codestar74 жыл бұрын
Just thought it was my Duty to drop a comment here. I can tell by the age spots on the mechanic's hands he's about my age. I've been in and out of the electronic's build / repair business for over 40 years. The only true secrete of the business was being a good detective, how did this break, why did it break and what component broke. There weren't very many of us back in the day, and as we found a failure we would many times pass it on to the other technicians in town. Including the manufacturer such as Zenith, Silvana, RCA, TV's VCR's Stereos, etc. I used to enjoy tracking down the actual event. Many times I could tell exactly what the customer did that caused the fault. It's part mechanics, part electronics and part detective work. Also, it takes very fine digital motor skills and a critical eye. I can tell you Norelco makes a fine product and these battery failures are a product of just leaving the stand plugged in indefinitely. No battery can take a forever charge. Good job on the video. My only correction was in the reassembly. You'll have an easier time of it if you put the battery pack and electronics in the shield cover and install it back into the shaver as a unit.
@Randolf927 ай бұрын
Thanks for making this video! I managed to replace the battery.
@musashi131911 ай бұрын
Is it still waterproof after replacement?
@helios44m-423 жыл бұрын
I have purshased your battery for replacement and it's work well. THANK YOU !
@Khymeira3 жыл бұрын
Hey, could you tell me what type of batteries they were? AA or AAA rechargeables? Thanks!
@gricius4 жыл бұрын
The hardest part is to put the blacktop following battery placement. Really hard
@RONILLOUZ3 ай бұрын
impossible thing
@trolonmccartney32675 жыл бұрын
Would this batteries work for the Philips BodyGroom TT2039/32? It's pretty similar to this model but with 8h charge, I think.
@citpeks2000 Жыл бұрын
Worked perfect! Thank you for posting!
@daz1000 Жыл бұрын
im sorry - but this is absolutely bonkers! Philips are a complete set of **** for making this battery replacement so complicated. I will be on the phone to them tomorrow. crazy. great vid though
@chandlerbing7003 ай бұрын
Hi from India, Thanks.
@AkkuWechselАй бұрын
Hi from Germany! Thank you for your comment. We're glad you found our video helpful. If you have any questions or need further assistance, feel free to ask. Best regards!
@taurus72283 жыл бұрын
Thank you
@randonnjarhead60902 жыл бұрын
To make life simpler. Clip the old tabs expose wire. Care full doing so razor is best method run a median wire from new battery tabs to the wire supply to battery casing
@patrickpatrick49336 ай бұрын
Good morning. I ordered the battery via the link in the description. I couldn't put back the two small insulators supplied with the battery, I put insulating tape. When I placed the black case, the battery started to heat up and became hot. I assume the battery is dead and maybe the circuit board. What do you think ? Thanks for your help. (Google translation)
@mink-yah96532 жыл бұрын
Thank you! Added a battery with a bit more mAh to get the job done!
@ehsanr215 жыл бұрын
ممنون عالی بود خیلی کمکم کرد
@zeeshankhokhar63326 жыл бұрын
Very helpful video and replacement battery. Thanks
@kack71304 жыл бұрын
i saved $90x2 devices using this vdo, awesome
@quentinvassor1752 жыл бұрын
Merci !
@lorettamiller12575 жыл бұрын
Since I am the one replacing the battery I decided it's cheaper less time consuming and easier to buy a new razor
@preciouspet35154 жыл бұрын
idiot
@lucac.9099 Жыл бұрын
Dopo aver cambiato la batteria sotto carica lampeggia verde dopo un ora sotto carica resta la luce arancione sempre sotto carica dove ho sbagliato?
@preciouspet35154 жыл бұрын
Completed in 15 mins. Cheers
@lucac.90996 жыл бұрын
grazie ottimo video
@erickv9934 ай бұрын
One of the best examples of planned obsolescence! Make it as hard and expensive to replace a simple battery so people buy a new one 😡
@AkkuWechselАй бұрын
Thank you for your comment. We understand your frustration with the difficulty of replacing certain batteries. Our goal is to provide helpful guides and resources to make these replacements as easy and affordable as possible. If you have any questions or need assistance, feel free to reach out. Best regards!
@jrgraywolf4 жыл бұрын
Thanks
@ralflofstad4 жыл бұрын
Thanks!
@vitkata5 жыл бұрын
Danke..Super..
@ChristopherWilley16 жыл бұрын
really great video. I finished the whole repair in the time it took to watch the video!
@KNGTTO5 жыл бұрын
Have you made it work both sides of the trimmer? in the video only it worked 1 :S Thank you.
@markuslepisto78244 жыл бұрын
What kind of battery did you use?
@professorchaos56206 жыл бұрын
excellent video! thank you
@socrates_the_great62093 жыл бұрын
They in the video skippede fast over the hardest part. Putting the button thing on again. Had to cut some plastic from the sides to get it on. Did not feel like it was designed to ever be put together again lol.
@AncoraImparoPiper3 жыл бұрын
Yeah. It was designed to be never disassembled and to replace the batteries either. Just use and throw away. What a waste.
@tampaflorida336106 жыл бұрын
That helped a lot, Thanks !
@KNGTTO5 жыл бұрын
Have you made it work both sides of the trimmer? in the video only it worked 1 :S Thank you.
@hassanal-saleh98005 жыл бұрын
Thank you so much. This video helped me a lot.
@KNGTTO5 жыл бұрын
Have you made it work both sides of the trimmer? in the video only it worked 1 :S Thank you.
@hassanal-saleh98005 жыл бұрын
@@KNGTTO yea both sides are working same as before.
@KNGTTO5 жыл бұрын
@@hassanal-saleh9800 What type of batteries can use this trimmer? 1.2v 900mah? 2.4v 700mah? 3.4v 18650? You can use 3.4v ones? Thank you
@KNGTTO5 жыл бұрын
@@hassanal-saleh9800 with this one? www.ebay.es/itm/Akku-f%C3%BCr-Philips-Bodygroom-Series-7000-TT2040-32-900mAh-Kapazit%C3%A4t-Videoanleitung/122484663242
@KNGTTO5 жыл бұрын
@@MrNutty39 thank you so much for this. Didn't know that. Cheers.
@SPOTTEDTHAT4 жыл бұрын
thank you man, that really helped me out👍🏻
@Skaetdude4 жыл бұрын
can I take the old solder tab off the battery and solder it to the new battery? Mine looks to be in great shape! I was going to solder it on to a pair of Energizers that are 850mh 1.2 volt.
@agentstarkk3 жыл бұрын
Hi, I have a BG2040, it looks exactly like your TT2040. Is it the same shaver or at least does it use the same battery?
@filippf128 ай бұрын
Lohnt sich es diese ganze arbeit und und noch die Battery kosten da zu? Wenn man sie erst findet im Handel. Den meine maschiene is die BG2024/15 und kostet neu 35€
@AkkuWechsel8 ай бұрын
Hallo @filippf12, danke für deinen Kommentar zu unserem Akku-Wechsel-Video für den Philips Bodygroom Series 7000 TT2040. Ich verstehe total, dass du dir Gedanken machst, ob sich der Aufwand und die Kosten lohnen, vor allem wenn es um ein ähnliches Modell wie den BG2024/15 geht, der ja neu nur 35€ kostet. Aber hey, lass uns mal ein paar andere Aspekte anschauen: Erstens, es ist super umweltfreundlich, ein altes Gerät zu reparieren statt ein neues zu kaufen. Damit reduzierst du Elektroschrott und schonst Ressourcen. Außerdem kennst du dein altes Gerät schon und magst vielleicht bestimmte Features, die ein neues nicht hat. Und dann ist da noch der Spaßfaktor! Viele Leute finden richtig Freude daran, Dinge selbst zu reparieren. Es ist ein bisschen wie ein Puzzle oder Klemmbausteine, aber am Ende hast du was Praktisches, das du jeden Tag nutzen kannst. Es ist super befriedigend, selbst was zu reparieren, und eine coole Möglichkeit, neue Skills zu lernen. Für einige ist das sogar entspannender und lohnender als andere Hobbys. Am Ende liegt die Entscheidung natürlich bei dir: Austauschen oder neu kaufen. Aber wenn du Spaß am Basteln und Tüfteln hast, könnte der Akku-Wechsel ein echt cooles Projekt für dich sein. Falls du noch Fragen hast, schreib uns einfach! Energiereiche Grüße vom akku-wechsel.de Team
@SuperCreen5 жыл бұрын
It seems to work, awesome! :-) The only difference is that during charging, the green led doesn't seem to stop flashing (or it really takes a very long time until it's fully charged). Do you have any idea how long a full charge should take? Or is this a known issue maybe? Thanks!!
@SuperCreen5 жыл бұрын
Yes, it just stopped blinking, and we have a full charge! Hooray! :-)
@anthonygallo35763 жыл бұрын
Ya,,,,,, likr thats gonna go back together the way its suppose to
@azzam53392 жыл бұрын
Thanks I'll buy a new
@3diablo33 жыл бұрын
I want to make the 2.4V battery pack by assembling 2 normal 1.2V AAA batteries. It's possible?
@kederan48155 жыл бұрын
Helped me a lot replacing mine. Thanks
@KNGTTO5 жыл бұрын
Have you made it work both sides of the trimmer? in the video only it worked 1 :S Thank you.
@kederan48155 жыл бұрын
@@KNGTTO Yeah both sides of the trimmer works just like when I bought it
@markuslepisto78244 жыл бұрын
What kind of battery did you use?
@KNGTTO5 жыл бұрын
the batteries need to be 2.4v 700mah? or 1.2v 900mah? or 3.4 3400mah?thank you.
@markuslepisto78244 жыл бұрын
Did you get answer for this?
@mahmoodalhftee74856 жыл бұрын
Very good
@riniks1123 жыл бұрын
Do I really need to use a solder? Is there a way to do it without one?
@AkkuWechsel3 жыл бұрын
You need a solder.
@riniks1123 жыл бұрын
@@AkkuWechsel OK thanks but someone in the comments mentioned something about using super glue instead but if there's electrical connection it shouldn't work
@Mr-E.3 жыл бұрын
@@riniks112 On Amazon someone posted a review that they did not need to solder. It fit perfectly in because it is very tight. I also read the second review on here where they used super glue and tape with no need to solder.
@riniks1123 жыл бұрын
@@Mr-E. OK thanks!
@abdarsmk6r3 жыл бұрын
Why its so difficult to change a battery wtf 😂😂 i have the same shaver
@alexappel6114 жыл бұрын
Did the battery change with theses batteries: www.batterijenhuis.nl/oplaadbare-batterijen/aaa-oplaadbaar/ansmann-aaa-800mah-lsd-met-soldeerlippen Glued the batteries together with hot-glue (ony the top side, or else the batteries won't fit in the casing) and soldered them together, using the original piece of metal from the broken battery pack. It is difficult to use so little solder that it still fits in the casing, but I got it in. Works like a charm! Tnx for the video!!
@MrCbnestor6 жыл бұрын
Can I use Eneloop AAA batteries?
@anonymousfigure376 жыл бұрын
I just did this repair and used Eneloop AAAs. It was a really tight fit but I managed to get everything back together. I didn't even solder anything, just used hot glue and tape! It charges just fine.
@AkkuWechsel6 жыл бұрын
+Nestor C. our industry battery cells have a longer lifetime.
@MrCbnestor6 жыл бұрын
Thank you for ur answer. It is just that I have them already, And where I live it is hard to me to get/buy those batteries your using. I would love to buy those but its a pain in the a++. Great video, very well made.
@Mr-E.3 жыл бұрын
@@anonymousfigure37 Hi Sky, I know this is two years later, some are saying you have to solder, then I read your review and another on Amazon where soldering isn't required. I'm assuming the two extension terminals are pulled out of the casing so the battery terminals can fit in direct contact?
@anonymousfigure373 жыл бұрын
@@Mr-E. Hi! I wish I remembered the details... Rewatching this video I think it's like you assumed: I trimmed the two metal tabs off of the existing battery bundle (as opposed to desoldering the wires from the metal tabs as shown at 5:58). I probably folded each tab back on itself to create a sort of spring action, so that when the new AAAs were nestled into place there would be a lot of compression holding the AAAs snug. To connect the two new AAAs to each other (on the end opposite to the wires/tabs), I probably ripped off the metal tab jumper on the existing battery bundle and taped/glued that to the new batteries. Or maybe I created a jumper using a coil of bare copper wire or something I had on hand. All I really remember was using a strategic amount of electrical tape stretched taut to hold everything in place. It's a tight fit so I wasn't worried about poor electrical contact or anything. It's been over two years so I guess I was right! I still use the shaver weekly without any problem.
@jorgerueda65695 жыл бұрын
¿Please can this battery be used in the Philips Bodygroom tt2039/32? Thanks
@Adam_Al-Dawoudi5 жыл бұрын
Jorge Rueda Yes it will work perfectly
@jorgerueda65695 жыл бұрын
@@Adam_Al-DawoudiThanks a lot! So time for me to repair it! ^_^
@KNGTTO5 жыл бұрын
@@Adam_Al-Dawoudi Have you made it work both sides of the trimmer? in the video only it worked 1 :S Thank you. What type of batteries can use this trimmer? 1.2v 900mah? 2.4v 700mah? 3.4v 3400mah? Thank you
@alf200816 жыл бұрын
Amazing,
@rameradelabiblia3 жыл бұрын
Li-ion battery can i use???
@AkkuWechsel3 жыл бұрын
No!
@rameradelabiblia3 жыл бұрын
@@AkkuWechsel why not?
@AkkuWechsel3 жыл бұрын
@@rameradelabiblia It is dangerous! Please always only use the original battery type.
@rameradelabiblia3 жыл бұрын
@@AkkuWechsel okm tahnyouuuu
@UrpaDeFerro4 жыл бұрын
Cojonudo, lo he hecho todo igual y funciona perfecto. En el minuto 11:11 las he pasado putas para encajar la tapa de la botonera, hay que hacer palanca con un cuchillo o similar en el lateral de la máquina para poder encajar esa tapa hacia abajo. Las pilas las he pillado en la misma web y van bien.
@gemmamoreno20652 жыл бұрын
Hola que tipo de pila es gracias
@UrpaDeFerro2 жыл бұрын
@@gemmamoreno2065 Hola, pues es exactamente la del video: AAA de NiMH, 1.2V y 700 mAh. Ahora bien, después de apena 1 año la carga de las baterías ha disminuido considerablemente. La única ventajas de comprar este pack es que por los extremos son planas y ya vienen unidas por lo que son ideales para encajarlas en el espacio tan justo que hay. Si no fuera por eso, te diría que compres cualquier otra pila del mercado con más capacidad y seguramente bon más calidad, pero vas a tener que unirlas tu y si son pilas convencionales (con el pitorro en el polo positivo) no te va a resultar fácil encajarlas dentro de la máquina.
@MrWollollo1236 жыл бұрын
if i knew you had to do this i woulndt have bought it
@miguebrito66526 жыл бұрын
Do you send this batteries to poland? how much to Świnoujście ?
@AkkuWechsel6 жыл бұрын
Yes we ship it to Poland for 4,76 EUR shipping cost.
@thedad15 жыл бұрын
Where can the batteries be purchased? Thanks.
@AkkuWechsel5 жыл бұрын
www.akku-wechsel.de/shop/tt2040
@thegamingpicklez6 жыл бұрын
such music
@merla139 ай бұрын
Philips products are crap quality !😠
@AkkuWechsel8 ай бұрын
Hello @merla13, We understand your frustration and are sorry to hear about your unsatisfactory experience with your Philips product. Each brand has its supporters and critics, and it's important for such opinions to be shared so potential buyers can make well-informed decisions. Our aim with these videos is to provide assistance to those who want to repair their devices, regardless of the brand. Even if a product doesn't meet your expectations, repairing or changing the battery can extend its lifespan, helping to save resources and protect the environment. If you had specific issues with your device that we might address in future videos, please let us know. Your feedback is valuable to us and our community. Thank you for sharing your thoughts with us. With energy-rich greetings from the akku-wechsel.de Team