How to replace the Suspension Arm on a VW Polo MK5

Рет қаралды 16,153

3 жыл бұрын

Guide on How to replace the suspension arm on a Volkswagen Polo MK5 1.6 TDI 2012 model.
Check out the diagnostic machine I use - diydaly.co.uk/products/phoeni...
Any Donations to help Support my Channel are much appreciated.
Donate via Paypal - paypal.me/diydaly
Suspension arm Euro car parts : tidd.ly/2FYhH26
Suspension arm GSF car parts : tidd.ly/37zx7Fc
Suspension arm Amazon : amzn.to/3jpQgf5
Suspension arm eBay : rover.ebay.com/rover/1/710-53... arm
Tools :
Long reach spanner set - amzn.to/3onoLXe
Socket set - amzn.to/3eGx2Ak
18mm ratchet spanner - amzn.to/3omaaLW
1/2 impact driver - amzn.to/31zwZBK
Ring Inspection Lamp - amzn.to/3gGWHcG
Torx screwdriver set eBay - www.ebay.co.uk/itm/142442401623
Torx sockets - amzn.to/2ITmWkA
Pic set - amzn.to/33JcZyJ
Dewalt 3/8 impact driver - amzn.to/3njemLY
Mole grip set - amzn.to/2HzzhKk
Copper Grease - amzn.to/3kqJzef
Penetrating oil - amzn.to/3kqkJuY
Torque settings required:
Wheel Bolts = 130 NM
Watch the Video on how to carry out an engine service on the same vehicle :
• How to carry out Engin...
If you found this video useful, please Like Share and Subscribe to help grow the channel, and never miss any future content. kzfaq.info?...
Please also check out my website - www.diydaly.co.uk where you'll find top quality goods, tried, tested and recommended by actual mechanics.
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. This doesn't effect the price you pay!

Пікірлер: 40

@diydaly 3 жыл бұрын

Suspension arm Euro car parts : tidd.ly/2FYhH26 Suspension arm GSF car parts : tidd.ly/37zx7Fc Suspension arm Amazon : amzn.to/3jpQgf5 Suspension arm eBay : rover.ebay.com/rover/1/710-53481-19255-0/1?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fitm%2FMOOG-Track-Control-Arm-Front-Axle-Lower-Left-VO-WP-8853-OE-Quality%2F232158745299%3Fepid%3D249736486%26hash%3Ditem360dbd52d3%3Ag%3AICIAAOSw-0xYPX7j&campid=5338704655&toolid=10001&customid=polo arm

@charliediver1560 Жыл бұрын

Good clear video , thanks for taking the time to post .

@diydaly Жыл бұрын

Thanks for watching!

@6Martin Жыл бұрын

Very well explained and demonstrated. Thank u

@diydaly Жыл бұрын

You are welcome!

@Beastnappy 2 жыл бұрын

Excellent vid, TOP vid mate. Thank you very much👍

@diydaly 2 жыл бұрын

Glad you enjoyed it.. thanks for the comment, much appreciated 👍👌

@johnmcewan2772 3 жыл бұрын

A good video. Very informative.

@diydaly 3 жыл бұрын

Thanks for the comment , much appreciated 👌👍

@mitchd5208 3 жыл бұрын

Thanks clear easy to follow video

@diydaly 3 жыл бұрын

You're welcome!

@dannyblair5556 Жыл бұрын

Great video, very useful. I have just changed mine today, did not torque with car on its wheels, will loosen the bolts again and re torque while on the ground.

@diydaly Жыл бұрын

Glad it helped, thanks for the comment 👍

@Howster69 Ай бұрын

Should you not have tightened the 2 arm bolts with weight pushing up on the arm.

@chrisdervin5420 3 жыл бұрын

Thanks clearest video I have seen, giving it ago on Sunday :-)

@diydaly 3 жыл бұрын

Glad to help 😄 thanks for the comments! Much appreciated 👌👍

@chrisdervin5420 3 жыл бұрын

@@diydaly Just changed both sides on my Fabia which is the same set up as polo. I spent an hour or so trying to get back bush to line up. Tried all sorts of rods, podgers, the bolt with mole grips just would not go. I noticed the white metal bushes are quite rough, so I used a little bit of emery and filed a very slight lead where it was catching. This did the trick and second side was fairly easy using same technique. Cheers

@diydaly 3 жыл бұрын

@@chrisdervin5420 nice one! Glad you got it sorted mate 👍👍

@kennymitchell4345 Ай бұрын

Hi, great video. good advice about a spinning balljoint. My question is. See the middle of the wishbone. The blank middle bit. What is the name of the fitting/bush that this slots into. it looks like my sons one is very worn but the wishbone is completely seperate from this. Hope ive explained this question properly.

@diydaly Ай бұрын

Think you may mean the anti roll bar link?

@adrianmack3 3 жыл бұрын

Definitely covered the basics, but those bolts are torque to yield, they should be replaced. Shop manual also states to tighten the control arm bolts with the weight on the suspension to load the control arm. I failed to do that when I replaced mine, the large rear control arm bushings lasted 6 months before they self destructed.

@diydaly 3 жыл бұрын

Thanks for the info 👍👌

@leonardoesterhuizen4368 6 ай бұрын

Good afternoon. What is the torque setting for the bolts on the rear bushes?

@Simon_Mullan 4 ай бұрын

@@leonardoesterhuizen4368 70nm +90°

@johnnysmithers2850 Жыл бұрын

Have you got anything on putting a wishbone on a polo

@OwenMeth 4 ай бұрын

❤Thank you

@diydaly 4 ай бұрын

👍👍

@mufuliramark 4 ай бұрын

Is the other side just as easy for bolt access and removal

@Simon_Mullan 4 ай бұрын

No there is a small electric coolant pump you need to move to get access to the front bushing bolt. I disconnected the plug and the two clips hold it on can be just pushed off with a flat blade screwdriver.

@mufuliramark 4 ай бұрын

I did the drivers side yesterday and one of the bolts can’t come out because of the oil sump. I had to lift the engine up to remove it. Simple job, just inconsiderate position of sump.

@720pgamers4 8 ай бұрын

Quick question what size are them bolts or where do you get them from as can’t find them everywhere

@diydaly 8 ай бұрын

From the Vw dealer

@720pgamers4 8 ай бұрын

@@diydaly I did end up finding them from a online vw dealer there also on eBay as a kit

@Danmaster01 11 ай бұрын

my wheel is massively toed in after replacement. What did i screw up?

@diydaly 11 ай бұрын

Could just be the arm, advisable to get it tracked after replacement

@Danmaster01 11 ай бұрын

@@diydaly AUTODOC sent me slightly shorter arms. Thanks for the help though. Your channel was a good find.

@Simon_Mullan 4 ай бұрын

@@Danmaster01 I've just had the same issue but had to adjust the tie rods to their maximum position. I'll be buying from VW directly instead.

@estebanraggio2141 2 ай бұрын

The hell am i supposed to do if i have an automatic? Transmission's in the way

@alexwoods594 11 күн бұрын

I had the oil sump in the way fir the right side, I had to loosen the right engine mount and jack the engine up. 🙄

@kolthiuidukagjinit2845 Жыл бұрын

Vidio is very helpful,but the ti titinig bolts should be on a driving possession not on the rump possession,because thene car is on the road the bushes will be under stress .