No video
How to Replace the Valve Cover Gasket on a 2004-2008 Acura TSX with 2.4L Engine
Рет қаралды 34,347
Күн бұрынBrian Eslick from How to Automotive www.howtoautomo... takes you step-by-step through the process of replacing the valve cover gasket on a 2004-2008 Acura TSX with 2.4L engine.
Affiliate link mentioned in the video for Fel-Pro VS50614R Valve Cover Gasket Set amzn.to/2Ce1QYH
Affiliate link mentioned in the video for Milwaukee 2552-22 M12 FUEL Stubby Cordless 1/4" Drive Impact Gun Wrench Kit amzn.to/2RMXBst
Get your How to Automotive T-shirts, stickers, and more here: teespring.com/....
Affiliate link mentioned in the video for How to Automotive Tool Store www.amazon.com...
Website
For more videos, tips, and to purchase recommended tools and products visit my website at: www.howtoautomo...
Stay connected at:
Email: howtoautomotive@gmail.com
Facebook: / how-to-autom. .
Google+: plus.google.co....
LinkedIn: / brian-esl. .
Disclaimer
Owing to factors beyond the control of How to Automotive/Brian Eslick, it cannot guarantee against unauthorized modification of this information, or improper use of this information. How to Automotive/Brian Eslick assumes no liability for property damage or injury incurred as a result of any information contained in this video. How to Automotive/Brian Eslick recommends safe practice when working with power tools, automotive lifts, lifting tools, jacks and jack stands, electrical equipment, blunt instruments, chemical lubricants, or any other tools or equipment seen or implied in this video. Because of factors beyond the control of How to Automotive/Brian Eslick, no information contained in this video shall express or imply warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or information contained in this video is the sole responsibility of the user and not How to Automotive/Brian Eslick. #howtoautomotive #AcuraTSX
@HowtoAutomotive 5 жыл бұрын
links for parts and tools are in the description
@normellow 3 жыл бұрын
You rock buddy 👍
@rx7autoxer Жыл бұрын
Excellent video. Thank you for being so thorough and explaining everything so clearly. Made my job super quick and easy!
@shkuchiluchianno3326 5 жыл бұрын
hey can you do a video doing a head gasket on this same car?
@mayor399999999999999 4 жыл бұрын
Nice video. Looking at doing this to the wife's 2006 TSX. Changed the plugs the other week and there was oil in one of the plug holes.
@bts_flmz_1668 Ай бұрын
🔥🔥🔥 thank you so much for a very detailed video
@bandofworship Жыл бұрын
thank you so much for the video, repaired my wife car with no issues.
@darwindropmazda 5 жыл бұрын
Very good tutorial 👍
@ianyoung6829 5 жыл бұрын
Outstanding job Brian
@jamieroseman4429 Жыл бұрын
Excellent video. Is there any concern about air getting into the power steering system by disconnecting that line?
@HowtoAutomotive Жыл бұрын
You can pretty much bleed the air out of juice by idling, but if you have to, you can turn the wheel lock to lock with the engine off a few times then start it up and you should be good
@apeezuscamacho7291 11 ай бұрын
Dude got straight to it thank you amazing tutorial
@HowtoAutomotive 11 ай бұрын
Thank you for watching!
@jamieroseman4429 Жыл бұрын
I'm using this same fel pro kit and I'm following your video to a T. But I can't figure out if the valve tube seals are supposed to be pushed in all the way to the bottom lip? When i looked at my old ones the seals were flush with the edge of the hole. Is that due to swelling over time with the seals?
@jadawngriffis3745 6 ай бұрын
What if i dont have air to clean the tube seals
@1776PonySoldier 4 жыл бұрын
Can you give me an idea of what a fair price is to get this job done?
@joelthomas3823 Жыл бұрын
Great video thank you for posting
@walimac6489 Жыл бұрын
Would this fix a p2279 code for intake leak?
@HotDamnItsAdam 2 жыл бұрын
Thank you brother
@joelcandelario316 2 жыл бұрын
I did this on my tsx and forgot to apply silicone to the corners. Now it's leaking. Do I have to take off the gasket and apply or is there a way to seal it without taking it off?
@HowtoAutomotive 2 жыл бұрын
It needs to come back apart
@carlograjalez8421 5 жыл бұрын
Great job
@HowtoAutomotive 5 жыл бұрын
Carlo Grajalez thank you!
@JoseRamirez-ie2bk 5 жыл бұрын
Thanks
@HowtoAutomotive 5 жыл бұрын
Jose Ramirez thank you for watching!
@ianyoung6829 5 жыл бұрын
Hi Brian what scan tool would you recommend for newer BMW 2010 PLUS ( I am working on mostly x5 and x6)
@heavy_hittahz 2 жыл бұрын
I accidentally pierced thru a new ring not too big but you think it’d be ok?
@Cyrahhhh 5 жыл бұрын
Hi Brian, 1 of my bolts snapped in the nut, could i replace bolt with the cover on. When i remove washer the stud is still sticking out please lmk thanks
@HowtoAutomotive 5 жыл бұрын
Cyrah G it’s hard to say without seeing it. You will most likely need to pull cover back off and remove the broken bolt and order a new one.
@thecloud1432 Жыл бұрын
You forgot to mention that you need silicon where the head rail meets the timing cover.
@DIYD 4 жыл бұрын
can you put the gasket/silicone around the entire valve cover?
@HowtoAutomotive 4 жыл бұрын
Donnell Wright You don’t wanna do that. It causes more problems than it’s worth. Just in a sharp corners is where you’ll put the silicone
@DIYD 4 жыл бұрын
@@HowtoAutomotive Roger that
@HealthyCriticism 5 жыл бұрын
is it the same procedure for 2nd gen minus the power steering part?
@i8thesheets 3 жыл бұрын
Gen two is not the same.
@greenshards7422 2 жыл бұрын
So I apply silicon on the corners only?
@HowtoAutomotive 2 жыл бұрын
Yes
@ExceptionalQuality 5 жыл бұрын
What did you use to clean the top of the valve cover?
@RobertFixit 3 жыл бұрын
Looked good until I saw FELPRO. Come on bro! You have a TSX, the nice tools, and you cheap out on the gasket?
@donspaulding3343 Жыл бұрын
Is OEM considerably better? It's only $10 more than the felpro kit!
@sirsmack Жыл бұрын
@@donspaulding3343 OEM = Worth it
@tonyortiz3350 2 жыл бұрын
There only 6 cover bolts not 7. I’m a beginner on this engine but I know that much lol
@snooka88 4 жыл бұрын
You don’t explain or show what way the seals should be facing
@sm1353 3 жыл бұрын
the same way as the one you taking out. it really only fits one way.
Donny The Late Model Tech
Рет қаралды 134 М.
How to Replace VTEC Gasket / Spool Valve Filter and Power Steering Hose 2003 -2007 Honda Accord 2.4l
Donny The Late Model Tech
Рет қаралды 36 М.
Hardly Moving Productions
Рет қаралды 61 М.